Save up to 40% on VR Forged wheel sets! - Shop Now
Wheel Sets - Category - March
  See more parts for your Buick Grand National

BMR Suspension Sway Bar Kit With Bushings, Front Red SB020 And Rear SB021 Buick Regal | Chevrolet Malibu | Oldsmobile Cutlass | Pontiac Grand Prix 1978-1987

$339.95

BMR Suspension

Model #SB031R

Free Shipping


Shopper Award

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB031 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty solid 1.25-inch bar stock (front), and 1-inch bar stock (rear), the SB031 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bars are CNC-formed for exact manufacturing tolerances and repeatable high quality. The front sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.

BMR Suspension designed this sway bar kit for street performance, autocross, and road race applications. The SB031 sway bars give you a massive increase in sway bar rate. These rate increases allow you to drive harder through corners with minimal body roll. The SB031 front sway bar attaches to your G-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!

BMR Suspension’s SB031 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!

Features:

  • Fits 1978-1987 GM G-body
  • Designed for street performance, autocross, and road race applications
  • Dramatically reduces body roll
  • Massive increase in sway bar rate
  • Cold formed to better resist torsional fatigue
  • Manufactured from 1.25-inch (front), and 1-inch (rear) heavy-duty solid bar stock for increased strength
  • 88-durometer, greasable polyurethane bushings
  • Zinc-plated inner sleeves
  • Durable powdercoat finish
  • 3-4 hour installation time
  • Proudly designed in the U.S.A.
  • Proudly made in the U.S.A.
Fitment:
  • Buick Grand National | Buick Regal 1978-1987
  • Chevrolet Monte Carlo | Chevrolet Malibu 1978-1987
  • Oldsmobile Cutlass 1978-1987
  • Pontiac Grand Prix 1978-1987
Installation:
  • For Installation Instructions. Click here.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1978-1987
Buick Regal
Base
  • Front_Rear
1982-1983
Buick Regal
Estate Wagon
  • Front_Rear
1987
Buick Regal
GNX
  • Front_Rear
1984-1987
Buick Regal
Grand National
  • Front_Rear
1978-1987
Buick Regal
Limited
  • Front_Rear
1982
Buick Regal
Limited Turbo
  • Front_Rear
1978-1982
Buick Regal
Sport
  • Front_Rear
1983-1986
Buick Regal
T-Type
  • Front_Rear
1978-1981
Chevrolet Malibu
Base
  • Front_Rear
1978-1983
Chevrolet Malibu
Classic
  • Front_Rear
1978-1980
Chevrolet Malibu
Classic Estate
  • Front_Rear
1978-1981
Chevrolet Malibu
Classic Landau
  • Front_Rear
1979-1980
Chevrolet Malibu
Classic Sport
  • Front_Rear
1979-1980
Chevrolet Malibu
Estate
  • Front_Rear
1979
Chevrolet Malibu
Landau
  • Front_Rear
1979
Chevrolet Malibu
Police
  • Front_Rear
1979-1980
Chevrolet Malibu
Sport
  • Front_Rear
1979, 1981-1987
Chevrolet Monte Carlo
Base
  • Front_Rear
1983
Chevrolet Monte Carlo
CL
  • Front_Rear
1978-1981
Chevrolet Monte Carlo
Landau
  • Front_Rear
1986-1987
Chevrolet Monte Carlo
LS
  • Front_Rear
1978, 1980
Chevrolet Monte Carlo
Sport
  • Front_Rear
1983-1987
Chevrolet Monte Carlo
SS
  • Front_Rear
1980, 1987
Oldsmobile Cutlass
Base
  • Front_Rear
1980-1981
Oldsmobile Cutlass
Brougham
  • Front_Rear
1987
Oldsmobile Cutlass
Eurosport
  • Front_Rear
1980-1981
Oldsmobile Cutlass
LS
  • Front_Rear
1987
Oldsmobile Cutlass
Lujo
  • Front_Rear
1985-1987
Oldsmobile Cutlass
Salon
  • Front_Rear
1981
Oldsmobile Cutlass
Supreme
  • Front_Rear
1978-1979
Oldsmobile Cutlass
Vista Cruiser
  • Front_Rear
1979
Oldsmobile Cutlass
Vista Cruiser Brougham
  • Front_Rear
1978-1987
Pontiac Grand Prix
Base
  • Front_Rear
1981-1987
Pontiac Grand Prix
Brougham
  • Front_Rear
1984-1987
Pontiac Grand Prix
LE
  • Front_Rear
1978-1983
Pontiac Grand Prix
LJ
  • Front_Rear
1978-1980
Pontiac Grand Prix
SJ
  • Front_Rear

Who is BMR Suspension?

When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.

BMR Suspension is a brand you can trust when it comes to quality suspension products.

How It Started

BMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.

They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.

Proudly Made in the USA

BMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars. 

All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.

Real-World Testing

BMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.

Purchase BMR products at Vivid Racing

Your vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension. 

For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.



Warranty

BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. Obligation under this warranty is limited to product replacement but not the reinstallation of the replacement product or other incidental costs. This warranty does not cover any product that has been subject to misuse, neglect, alteration, accident, or improper installation. Normal wear shall not be considered a defect under this warranty. All warranty adjustments are limited to replacement or credit of returned merchandise. This warranty specifically excludes impact damage or damage to powdercoat. BMR will issue a Returned Material Authorization number for every return. Returned goods will not be accepted without an RMA Number. BMR will ship the replacement product at no charge using UPS Ground. If the customer would like to upgrade the shipping method (for example, Next Day Air), the customer will be charged the difference in shipping cost.

BMR product is designed to be used with OEM product and other BMR products. BMR does not warranty our product for fitment with aftermarket product from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. BMR products that are returned due to fitment issues with OEM components or BMR product will receive a full refund. BMR products that are returned due to fitment issues with aftermarket product will be subject to a 15% restocking fee.

Purchaser understands and recognizes that racing parts, equipment and services by or manufactured and/or sold by BMR, are subject to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part sold or manufactured by BMR for a particular application is solely the purchaser's decision. BMR makes no warranties whatsoever, expressed, implied or written, THERE IS NO WARRANTY OF MERCHANTABILITY. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnify and hold Seller harmless from any claim, action or demand arising out of or incident to Buyer's installation or use of products purchased from BMR.

Check out these other great products