$379.95
Model #SB043R
Free Shipping
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB043 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 35mm (front) and 25mm (rear)DOM steel tubing, the SB043 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality.Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB043 attaches to your S550 Mustang with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.
BMR Suspension designed the SB043 sway bar kit for street performance, autocross, and road race applications. The large adjustable sway bars’ three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bars. The SB043 front sway bar gives you a 19%-55% increase in sway bar rate, and the rear bar gives you a 63%-208% increase in rate over the stock bar. These rate increases and adjustability allow you to fine-tune the handling characteristics of your S550 Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB043 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!
BMR Suspension’s SB043 sway bar kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.!
Features:
WARNING: Cancer and Reproductive Harm
Make Vehicle | Model | Submodel | Year | Engine | Notes |
---|---|---|---|---|---|
2015-2016 Ford Mustang Base |
Mustang | Base | 2015-2016 |
|
|
2019-2020 Ford Mustang Bullitt |
Mustang | Bullitt | 2019-2020 |
|
|
2015-2020 Ford Mustang EcoBoost |
Mustang | EcoBoost | 2015-2020 |
|
|
2015-2020 Ford Mustang EcoBoost Premium |
Mustang | EcoBoost Premium | 2015-2020 |
|
|
2015-2020 Ford Mustang GT |
Mustang | GT | 2015-2020 |
|
|
2015 Ford Mustang GT 50 Years Limited Edition |
Mustang | GT 50 Years Limited Edition | 2015 |
|
|
2015-2020 Ford Mustang GT Premium |
Mustang | GT Premium | 2015-2020 |
|
|
2020 Ford Mustang GT V8 |
Mustang | GT V8 | 2020 |
|
|
2015-2020 Ford Mustang Shelby GT350 |
Mustang | Shelby GT350 | 2015-2020 |
|
|
2016-2020 Ford Mustang Shelby GT350R |
Mustang | Shelby GT350R | 2016-2020 |
|
|
2020 Ford Mustang Shelby GT500 |
Mustang | Shelby GT500 | 2020 |
|
|
2015-2017 Ford Mustang V6 |
Mustang | V6 | 2015-2017 |
|
|
2017-2018 Ford Mustang V8 |
Mustang | V8 | 2017-2018 |
|
When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.
BMR Suspension is a brand you can trust when it comes to quality suspension products.
BMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.
They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.
BMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars.
All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.
BMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.
Your vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension.
For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.