$369.95
Model #SB033R
Free Shipping
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB033 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 32mm DOM tubing, the SB033 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality.Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The SB033 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB033 sway bar for street performance, drag race, autocross, and road race applications. The large adjustable sway bar has three positions, giving you the versatility to drive to and from the track and still out handle the competition with the same sway bar. The SB033 gives you a 25%-200% increase in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!
BMR Suspension’s SB033 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!
Features:
WARNING: Cancer and Reproductive Harm
Make Vehicle | Model | Submodel | Year | Engine | Notes |
---|---|---|---|---|---|
2012 Chevrolet Camaro 1SS |
Camaro | 1SS | 2012 |
|
|
2012 Chevrolet Camaro 2SS |
Camaro | 2SS | 2012 |
|
|
2012-2015 Chevrolet Camaro SS |
Camaro | SS | 2012-2015 |
|
|
2014-2015 Chevrolet Camaro Z/28 |
Camaro | Z/28 | 2014-2015 |
|
|
2012-2015 Chevrolet Camaro ZL1 |
Camaro | ZL1 | 2012-2015 |
|
When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.
BMR Suspension is a brand you can trust when it comes to quality suspension products.
BMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.
They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.
BMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars.
All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.
BMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.
Your vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension.
For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.