Brian Crower Stage 3 Camshaft Nissan Infiniti VQ35DE 03-06
BC high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every BC camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production. By grinding cores in high volume, Brian Crower, Inc. is able to pass the cost savings on to the end user. Quality at an affordable price.
BC uses small diameter grinding wheels during the finishing phase when applicable to generate a more aggressive ramp rate for a faster cylinder fill rate. More air + more fuel = more power. Although it takes longer to grind the cams, research and development has proven that the inverted radius created by the small grinding wheel on the opening side delivers more horsepower on radius and roller rocker applications than the conventional, large diameter grinding wheels.
All BC cams are checked on a high speed, sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe, with .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Measuring camshafts for rise error and chattermark detection, this model can measure 200 parts per hour.
Camshafts designed for Stage 3 applications. Price is per set/4.
*Contact Us for special pricing.*
WARNING: Cancer and Reproductive Harm
Due to the nature of performance applications and lack of control during installation and operation, all products sold by Brian Crower Inc. are sold without any expressed warranty or any implied warranty of merchantability or fitness for a particular purpose. Brian Crower Inc. shall not, under any circumstances, be liable for any special, incidental or consequential damages, including, but not limited to, damages or loss of other property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the purchaser which may arise and/or result from the sale, installation or use of these parts. Brian Crower Inc. reserves the right to make product improvements or changes without notice and without incurring liability with respect to similar products previously manufactured.
Brian Crower Inc. warranties are void when said Brian Crower product in question has been physically altered, improperly installed or used or otherwise damaged due to no fault of Brian Crower Inc. or has not been used for the said purpose it was intended or for which it was designed. Brian Crower Inc. does not warrant the performance of the products due to Brian Crower Inc. lack of control during product installation and usage.
These products are designed primarily for off highway use. Check State and Federal laws and emissions regulations.
AEM Induction AEM Cold Air Intake System Nissan 350Z 2003-2006 3.5L V6