.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
BulletProof Hitches® are manufactured to a very tight tolerance of +/- .010 of an inch. Unfortunately, hitch receivers cannot always live up to these standards. Tolerances can vary as much as .100 of an inch and could cause some unwanted movement or rattle in the hitch.
To solve this, we have developed the 2.5" BulletProof Anti-Rattle Clamp. It allows you to tighten the hitch to the receiver and eliminate all movement. Our Anti-Rattle clamp is made from 1/2" thick pressed brake steel and features our signature black, textured powder coat.
Installation is simple - just slide the hitch through the clamp, insert the hitch into the receiver, tighten the bolt and then tighten the jam nut with a wrench to eliminate movement inside the receiver.
What's Included:
Features:
Notes:
To solve this, we have developed the 2.5" BulletProof Anti-Rattle Clamp. It allows you to tighten the hitch to the receiver and eliminate all movement. Our Anti-Rattle clamp is made from 1/2" thick pressed brake steel and features our signature black, textured powder coat.
Installation is simple - just slide the hitch through the clamp, insert the hitch into the receiver, tighten the bolt and then tighten the jam nut with a wrench to eliminate movement inside the receiver.
What's Included:
- 1 x 2.5" Anti-Rattle Clamp
- 1 x 3/4" Bolt
- 1 x 3/4" Jam Nut
Features:
- Works with any 2.5" shank hitch and receiver tube
- Comes with a 3/4" fine thread bolt and 3/4" jam nut
Notes:
- Torque specification on the bolt is 40-ft lbs
- Anti-Rattle Clamp is NOT compatible with weight distribution systems.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.