If you're looking to enhance your 2017-2020 Ford Raptor for off-road adventures while keeping that factory ride quality, Camburg's preload spring spacers are the perfect solution. Designed specifically for the Gen2 Raptor, these spacers lift and level the front end, ensuring you can tackle any terrain without compromising comfort.
These spacers preload the OEM Fox coilovers, increasing compression travel for better off-road capability. With two lift options available—1.5 inches for leveling with 35-inch tires and 2 inches for those running larger 37-inch tires—you can customize your setup based on your driving style and tire choice. Just keep in mind that these spacers are not compatible with aftermarket coil springs on OEM shocks.
Installation is straightforward, though it does require removing the coilovers from your truck and using a heavy-duty spring compressor. For 2019-2020 models equipped with electronic FOX Live Valve suspension, a slight modification to the plastic wire retainer is necessary to ensure everything fits snugly. Also, if you're using the factory OEM 17-inch wheels or positive offset wheels with larger tires, you might need a 1/4" to 3/8" wheel spacer for optimal clearance. For the best performance, we recommend going with a zero offset wheel.
For optimal handling and alignment, consider pairing these spacers with Camburg’s upper control arms. This combination will correct and improve geometry, ensuring your Raptor performs at its best on both the trails and the pavement.
A 2018 Ford Raptor owner shared, "I installed these spacers along with 37-inch tires, and they leveled my truck perfectly. The ride quality didn't suffer at all, and I can tackle any off-road challenge with confidence!"
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2017-2020 Ford F-150 |
F-150 | 2017-2020 |
|
2017-2020 Ford Raptor |
Raptor | 2017-2020 |