.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Ford F-100 Ranger
Select the year of your Ford F-100 Ranger:
If you're looking to seriously upgrade your 2WD Ford Ranger from 1998 to 2000, this 5.5-inch lift kit from Camburg is where it's at. This isn’t just another kit; it’s been the go-to for years among folks who want real performance on and off the road.
What sets this kit apart? Well, it starts with the heavy-duty 3-inch lift fabricated race spindles. These bad boys come with a beefy 1-inch vertical uniball that replaces the stock upper ball joint, which is known to give out when you push your truck hard. This upgrade gives you a solid 10 inches of usable wheel travel—perfect for tackling rough terrain without worrying about your suspension failing.
The upper arms are crafted from 1.50" x .120 wall 4130 chromoly tubing, designed to double shear the uniball for added strength. Plus, we’ve paired it with FOX 2.0 series shocks that bolt right in and are valved specifically for this setup. You’ll feel the difference in control and comfort, whether you’re cruising the highway or hitting the trails.
And let’s not forget about the lift itself. Our coil springs provide an additional 2.5 inches of height, and they’re heat-treated and stress-relieved to handle whatever you throw at them. With a track width increase of 1.5 inches per side, you’ll enjoy better stability and even more wheel travel. Just a heads-up: if you're planning to run 33-inch tires, fiberglass front fenders are a must.
What You Get:
- Tubular chromoly upper arms
- Fabricated spindles
- CRS Coil springs
- FOX 2.0 Performance IFP front shocks (model: 980-24-648)
- Stainless/Kevlar braided extended front brake lines
- Frame gusset reinforcement kit
- 8-inch limit straps
- All necessary hardware
Key Features:
- 5.5 inches of lift
- 10 inches of wheel travel
- 1.5 inches wider per side
- FOX 2.0 shocks for enhanced performance
Tech Specs:
- Lift: 5.5 inches (front)
- Wheel Travel: 10 inches
- Track Width: +1.5 inches per side
- Wheel Size: 15-17 inches
- Max Backspacing: 4.75 inches
- Tire Size: 31-33 inches
Installation:
- Check out the Installation Guide for step-by-step instructions.
Fitment:
- Ford Ranger XLT 2WD 1998-2000
Important Notes:
- For 1998-2000 models, you’ll need to use the larger 2001+ 11.25-inch OD brake rotors.
- Make sure to reuse the factory OEM spindle snouts/pins; aftermarket versions won’t fit.
- Fiberglass front fenders are required if you want to run 33-inch tires.
- This kit is designed for 2WD Rangers with coil springs only. If you have a torsion bar setup, check out our Ranger Edge 6.0 kits instead.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Ford F-100 Ranger | 1998-2000 | XLT |
| Ford F-100 Ranger | 1998 | Base |
| Ford F-100 Ranger | 1998-2000 | XL |
| Ford F-100 Ranger | 1999-2000 | XLT Sport |
| Ford F-100 Ranger | 1999-2000 | XL Sport |
| Ford F-100 Ranger | 1999-2000 | HD |
| Ford Ranger | 1998 | Splash |
| Ford Ranger | 1998-2000 | EV |
| Ford Ranger | 1998-2000 | XL |
| Ford Ranger | 1998-2000 | XLT |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.