Save up to 40% on VR Forged wheel sets! - Shop Now
SEATS - AFFIRM
  See more parts for your Porsche 997 Carrera

VF Engineering VF510 Supercharger System Porsche 997.1 Carrera S 3.8L Manual 05-08

$10,995.00

VF Engineering

Model #VFK60-01


Shopper Award

The VF-Engineering supercharger system for the 997 Porsche is a result of 12 months of ongoing development and testing. The specification for this kit was set as:

• Bolt-on and reversible conversion 
• All hardware must fit under factory engine compartment lid 
• Non-invasive installation OEM quality 
• 6 psi with air-water intercooling 
• Hp target in the 996TT range with stock reliability and driveability

The VF-Engineering designers set about designing the billet supercharger mounting bracket with CAD software creating solid models of parts to be CNC manufactured. The bracket was designed to utilize OEM bolt patterns and requires no alteration or relocation of any engine parts to be fitted. Made from 6061-Tx aircraft grade aluminum the bracket mounts to factory machined surface points on the aluminum engine block for a precision fit.

 

A V2 model Vortech Engineering supercharger unit was chosen after consultation with Vortech engineers and matching the engine;s volumetric efficiency with supercharger compressor maps. The V2 unit contains helical-cut gears for super quite performance - virtually silent with the engine compartment lid closed. The V2 supercharger has a 20psi and 1000cfm maximum capacity and is an over-engineered part for this Porsche application which is geared to produce a conservative 6psi in the engine;s intake manifold.

  

The fastidious design of the supercharger bracket, positions the belt driven supercharger to maintain use of the OEM spring loaded belt tensioner. The serpentine belt routing was designed to maintain the correct rotation of all the accessories and maintain optimal pulley wrap for maximum friction.

  

The Vortech air to water intercooler (charge cooler) was integrated into the tight fit engine bay as means of reducing charged induction (boost) temperatures. Lower charge temperatures promote engine safety by reducing knock and improving the quality of the combustion cycle. Air charge (boost) from the supercharger is directed through the chargecooler core before entering the throttle body. The cooler core contains isolated channels circulating with water from a separate self contained system cooled by its own radiator. VF-Engineering integrated a Porsche OEM front radiator and front bumper vents into the kit. Water is circulated by means of an added OEM Bosch water pump through OEM Good Year water lines. Intake air temperatures in the manifold were measured to be approx 140 deg F even with ;spirited; driving at 118 deg F ambient temperatures in Arizona desert conditions mid-Summer. This dramatic drop in charge temperature helps the 997 create consistent power. For added safety the chargecooler is designed to perform continuously whilst the ignition is on. 

Includes:

  • ECU Tuning
  • Upgraded Injectors
  • Vortech V3 Centrifugal Supercharger with self contained oil
  • Porsche OEM GT3 Front Radiator for air to water intercooler
  • Supercharger CNC Machined Bracket
  • Roto Molded Black Plastic Intake Tube
  • All required hardware - You need NOTHING Else

Important Documents:

Click Here for Installation

Stock vs Supercharged Performance

Specifications  Stock 997S 997S Supercharged
Cylinders 6 6
Displacement 3.8 L 3.8 L
Engine layout Rear engine Rear engine
Horsepower (SAE) 355 hp 510 hp
Torque (SAE) 295 lb-ft  380 lb-ft 
Compression ratio 11.8 : 1 11.8 : 1
Top track speed 182 mph 185+mph
0-60 mph 4.6 sec 4.1 sec (est.)
0-99 mph 10.7 sec 8.7 sec 
1/4 Mile 12.97 @ 110.69 MPH 11.45 @ 124.42 MPH

 

With all major components in place, the head of R&D at VF-Engineering set about shaping the air ducts from the filter to the throttle body. The intake pipe is specially tuned for its air flow characteristics and pressure relief system. Production pipes are manufactured from a lightweight molded high temperature polymer. The thermal insulating properties of the plastic pipes prevent heat transfer into the cooled charged air traveling inside them.

Engine management software was by written by GIAC with extensive testing completed. Multiple factors such as charge air temperatures, ignition timing, fuel trims, maps and injector performance were taken into account. The Carrera 2 and 4 test vehicles were extensively dynoed on the GIAC 4WD Mustang and monitored for wide band air fuel ratios at load levels often greater than would be experienced on the road. The results are an increase of 120 horsepower and 80 ft.lbs of fully useable torque.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2005-2008
Porsche 997 Carrera

What is VF Engineering?

Since 1999, VF Engineering has been leading the industry in developing complete bolt-on supercharger systems for European sports cars. The company has been supercharging 5.2-liter V10 engines since 2010, and now offers HEX Tuning off-road race tunes for Audi, BMW, Ferrari, Lamborghini, and more!

VF’s management and engineering team draw upon their immense experience of high-performance superchargers to create top-rated products. VF Engineering has been working on modern sports cars in joint and proprietary projects and partnerships with firms in the United Kingdom, Switzerland, and the USA. Such has given VF the opportunity to promote its product lineup in Europe, U.S., and world markets. VF Engineering is dedicated to staying up to date with the latest information and technology. Moreover, it has access to new models as they roll off the assembly lines in Germany through important OEM connections, clients, and manufacturer organizations.

Where is VF Engineering Located?

VF Engineering is located in Orange County, California, where it has remained since its inception. The facility measures approximately 15,000 square feet and includes a Mustang AWD 500 chassis dyno, four Hunter lifts, a large photography studio, an R&D room with a rapid prototype, and a room for ECU board work. 

What Does VF Engineering Mean?

Interestingly enough, the acronym in VF Engineering does not mean anything; the name was chosen merely from availability. What VF Engineering stands for is far more important and something that no clever marketing scheme could achieve. Every single part, line of code, and supercharger system that leaves with the VF label stands for the epitome of design, engineering, and performance. Seeing the VF label on a part means that your car will be running the best it can.

More than 93 percent of VF Engineering’s supercharger systems are still running strong even after years and years of spirited use. In fact, many of these systems are already on their second and third owners! That is a true testament to the solid design, durable construction, and remarkable performance that VF parts boast. 

Upgrade to VF Engineering Today

To unleash the true power and potential of your vehicle, you need a supercharging system from VF Engineering. Vivid Racing is proud to carry a large inventory of performance-enhancing parts from VF, including complete bolt-on supercharger systems and HEX tuners for a variety of makes and models. You will notice the difference immediately and wonder how you ever drove with a factory power output. If you have any questions regarding VF’s superchargers, please call our expert parts team at (480) 966-3040.

Check out these other great products