.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for BMW 318i
Select the year of your BMW 318i:
If you have a BMW Transmission Adapter on your 1JZ / 2JZ, SR, RB, LS, any engine...this clutch line is the right one! This is setup exactly how a normal clutch line would be set but we add 6 inches of length for the additional space taken up by the trans adapter.
This product is designed for those who want to eliminate engine bay clutter, improve engine bay aesthetics, improve pedal feel, and/or adapt a New transmission (if applicable). This a fullreplacement one-piece line from clutch master cylinder to slave cylinder. Other lines offered just replace the soft line between the stock hard lines.
It is made using -3AN stainless steel, Teflon PTFE lined, PVC coated line from the clutch master cylinder to the slave cylinder. Our PTFE Teflon inner core hose is manufactured from DuPont's Type 62 fine grade resin, 304 stainless steel wire braid. The hose has a burst pressure of 9000psi. It is chemically resistant and virtually unaffected by all commercial chemicals, acids, alcohols, coolants, hydrocarbons, solvents, synthetic compounds, and hydraulic fluids. More than half of those will hopefully never be on your car (hopefully!).
Fitment:
This Clutch Line works for: BMW E30 with BMW Trans Adapter 1JZ-GTE / 2JZ-GTE
This product is designed for those who want to eliminate engine bay clutter, improve engine bay aesthetics, improve pedal feel, and/or adapt a New transmission (if applicable). This a fullreplacement one-piece line from clutch master cylinder to slave cylinder. Other lines offered just replace the soft line between the stock hard lines.
It is made using -3AN stainless steel, Teflon PTFE lined, PVC coated line from the clutch master cylinder to the slave cylinder. Our PTFE Teflon inner core hose is manufactured from DuPont's Type 62 fine grade resin, 304 stainless steel wire braid. The hose has a burst pressure of 9000psi. It is chemically resistant and virtually unaffected by all commercial chemicals, acids, alcohols, coolants, hydrocarbons, solvents, synthetic compounds, and hydraulic fluids. More than half of those will hopefully never be on your car (hopefully!).
Fitment:
- BMW E30 with M10
- BMW E30 with M42
- BMW E30 with M44
- BMW E30 with M20
- BMW E30 with M50
- BMW E30 with M52
- BMW E30 with M54
- BMW E30 with S50
- BMW E30 with S52
- BMW E30 with S54
- BMW E30 with M60
- BMW E30 with M62 / S62
This Clutch Line works for: BMW E30 with BMW Trans Adapter 1JZ-GTE / 2JZ-GTE
Other Part Numbers:
Chase Bays #chbCB-E30-CLUTCHEXT
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| BMW 318i | 1984-1985, 1991-1993 | Base |
| BMW 318is | 1991-1994 | Base |
| BMW 320i | 1982-1983, 1992 | Base |
| BMW 325 | 1986-1988 | Base |
| BMW 325e | 1985-1987 | Base |
| BMW 325es | 1986-1987 | Base |
| BMW 325i | 1987-1993 | Base |
| BMW 325iX | 1988-1991 | Base |
| BMW 325is | 1987-1992 | Base |
| BMW M3 | 1988-1991 | Base |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.