.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Acura Integra
Select the year of your Acura Integra:
This product is designed for those who need or want to upgrade to a Wilwood 0.625" (5/8) or 0.7" (3/4 Larger Bore) Clutch Master Cylinder on their Honda Civic / Acura Integra chassis without cutting or drilling their firewall. Some transmission swaps require a larger bore clutch master cylinder and since there isn't a larger EG / EK / DC one you can swap in, this is the best method. Additionally, this product is much more aesthetically pleasing than the ugly Honda cylinder and matches our Brake Booster Eliminator if you have it.
You can get it with either its own Billet Chase Bays Reservoir or a Clutch Feed Adapter hose to share fluid with the brake reservoir, like BMwith Mazda/Mitsubishi do stock. The black powder coated plate is made of 0.125" (1/8 or 3.17mm) steel and has the master cylinder mounting studs pressed and welded in. It uses the same thread type as stock, which is M8x1.25.
This does not fit with a stock clutch line but the Chase Bays Clutch Line has a Banjo connection which works perfectly with this product. Just use the Banjo Bolt that's included here when you add the Master Cylinder to this order since the thread pitch on the stock clutch MC and the Wilwood MC is different.
Honda Transmission, select the 0.625"(5/8 bore)
G Force / PPG Dogbox, select the 0.75" (3/4 Bore)
You can get it with either its own Billet Chase Bays Reservoir or a Clutch Feed Adapter hose to share fluid with the brake reservoir, like BMwith Mazda/Mitsubishi do stock. The black powder coated plate is made of 0.125" (1/8 or 3.17mm) steel and has the master cylinder mounting studs pressed and welded in. It uses the same thread type as stock, which is M8x1.25.
This does not fit with a stock clutch line but the Chase Bays Clutch Line has a Banjo connection which works perfectly with this product. Just use the Banjo Bolt that's included here when you add the Master Cylinder to this order since the thread pitch on the stock clutch MC and the Wilwood MC is different.
Honda Transmission, select the 0.625"(5/8 bore)
G Force / PPG Dogbox, select the 0.75" (3/4 Bore)
Other Part Numbers:
Chase Bays #chbCB-H-CMCADAPT
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Acura Integra | 1994-1998 | RS |
| Acura Integra | 1994-2001 | LS |
| Acura Integra | 1994-2001 | GS-R |
| Acura Integra | 1995-1996 | Special Edition |
| Acura Integra | 1997-2001 | GS |
| Acura Integra | 1997-2001 | Type R |
| Honda Civic | 1992-1995 | VX |
| Honda Civic | 1992-2000 | CX |
| Honda Civic | 1992-2000 | EX |
| Honda Civic | 1992-2000 | DX |
| Honda Civic | 1992-2000 | LX |
| Honda Civic | 1992-2000 | Si |
| Honda Civic | 1996-2000 | HX |
| Honda Civic | 1997-2000 | EX-R |
| Honda Civic | 1998-2000 | GX |
| Honda Civic | 1999-2000 | EX-R SIR |
| Honda Civic | 1999 | Value Package |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.