.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Subaru Impreza
Select the year of your Subaru Impreza:
The Chase Bays High Pressure Power Steering Hose is designed to eliminate the common OEM pressure hose leaks with improved aesthetics, higher durability, and stealthy design. It is a full 100% upgraded AN fitting replacement of the OEM hose, from rack to pump.
ALL Hose and Hose Ends are BMRS aka Brown and Miller Racing. This is the best Hose/Hose Ends in the world, the same components seen on NASCAR and Indy Car. All the Fitting Adapters are designed and manufactured by Chase Bays to be chassis specific for perfect leak free installs.
Hoses and Adapters
The high-pressure rack to pump hose is -6AN stainless steel, Teflon PTFE lined, and black Hytrel coated. This coating is crucial, it makes the hose resistant to chaffing if it routes against metal or a fellow hose. It is completed with high end black billet aluminum fittings with proper O-Ring or Crush seals and Metric to AN adapters for the rack and pump conversion to AN.
Every hose is individually pressure tested to 3,500 psi before it leaves our building, your high pressure power steering hose will not see above 2,000 psi.
We also make a full 100% upgraded AN fitting replacement of the OEM reservoir and hoses.
ALL Hose and Hose Ends are BMRS aka Brown and Miller Racing. This is the best Hose/Hose Ends in the world, the same components seen on NASCAR and Indy Car. All the Fitting Adapters are designed and manufactured by Chase Bays to be chassis specific for perfect leak free installs.
Hoses and Adapters
The high-pressure rack to pump hose is -6AN stainless steel, Teflon PTFE lined, and black Hytrel coated. This coating is crucial, it makes the hose resistant to chaffing if it routes against metal or a fellow hose. It is completed with high end black billet aluminum fittings with proper O-Ring or Crush seals and Metric to AN adapters for the rack and pump conversion to AN.
Every hose is individually pressure tested to 3,500 psi before it leaves our building, your high pressure power steering hose will not see above 2,000 psi.
We also make a full 100% upgraded AN fitting replacement of the OEM reservoir and hoses.
Other Part Numbers:
Chase Bays #chbCB-WRX-PS
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Subaru Impreza | 2002-2007 | WRX |
| Subaru Impreza | 2004-2007 | WRX STI |
| Subaru Impreza | 2006-2007 | WRX Limited |
| Subaru Impreza | 2006-2007 | WRX TR |
| Subaru Impreza | 2007 | WRX STI Limited |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.