.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Buick Centurion
Select the year of your Buick Centurion:
Look inside most winning Indy cars and NASCAR vehicles and you'll find Clevite engine bearings. Since the development of the first precision insert-type bearing in 1929, Clevite bearings set the pace for engineering quality, and today they exceed industry standards for strength and durability. Most Clevite performance bearings use a special TriMetal design, first developed 50 years ago and perfected over time. A copper-lead alloy is added to a steel back, which is then electroplated with a white metal surface layer which produces an ideal degree of conformability, embedability, slipperiness, and fatigue resistance. Summit Racing also has other Clevite engine components like pistons, rings, and cam lifters, all manufactured to the same high.
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
Sold per piece
Fitments:
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
Sold per piece
Fitments:
- Buick 364 400 401 425 430 & 455 V8 1957-1976
- Picture are for representation only. Actual product may vary
Other Part Numbers:
Clevite #cleCB762P10
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Buick Centurion | 1971-1973 | Base |
| Buick Century | 1973-1974 | Luxus |
| Buick Century | 1973-1974 | Base |
| Buick Electra | 1959-1962, 1968-1974, 1976 | 225 |
| Buick Electra | 1959-1967, 1973 | Base |
| Buick Electra | 1966-1967, 1975 | Custom |
| Buick Electra | 1968-1974 | 225 Custom |
| Buick Electra | 1974 | 225 Limited |
| Buick Electra | 1975-1976 | Limited |
| Buick Estate Wagon | 1970-1976 | Base |
| Buick GS 455 | 1970-1972 | Base |
| Buick GS 455 | 1970 | GSX |
| Buick LeSabre | 1959, 1962-1964, 1970-1974, 1976 | Base |
| Buick LeSabre | 1970-1973, 1976 | Custom |
| Buick LeSabre | 1974 | Luxus |
| Buick Regal | 1973-1974 | Base |
| Buick Riviera | 1963-1965, 1967-1976 | Base |
| Buick Riviera | 1965, 1971 | Gran Sport |
| Buick Riviera | 1975 | GS |
| Buick Riviera | 1976 | SR |
| Buick Riviera | 1976 | Sport |
| Buick Skylark | 1965-1968, 1970-1972 | Base |
| Buick Skylark | 1968, 1970-1972 | Custom |
| Buick Skylark | 1970, 1972 | 350 |
| Buick Sportwagon | 1968 | Custom |
| Buick Sportwagon | 1968, 1970 | Base |
| Buick Wildcat | 1963-1968 | Base |
| Buick Wildcat | 1965-1968, 1970 | Custom |
| Buick Wildcat | 1965 | Deluxe |
| Buick Wildcat | 1966 | Gran Sport |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.