.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
1-step solution to control both heat and sound. Now in a convenient aerosol spray.
ATAC Spray-On is designed to transform the interior of your vehicle into an oasis of comfort. Say goodbye to the discomfort of excessive heat and annoying noise, and say hello to a serene, cool, and quiet ride!
For Internal Use Only
ATAC is designed exclusively for coating unfinished automotive interiors. Do not apply ATAC to the exterior of any vehicle, motorcycle, RV, SXS or on any surface that will be submerged under water. Do not apply on plastics or other surfaces that are not manufactured from steel or aluminum. Before applying ATAC, thoroughly prepare the surface by following our instructions below. Contact DEI if you have questions on where to apply ATAC or what surface to apply ATAC to.
Surface Prep
Surface should be clean and free from oil, grease, wax, and contaminants.
Rust should be removed or treated. Bare metal should be primed. We recommend a red oxide primer.
Painted surfaces should be scuffed before applying.
Do not apply in temperatures below 60°F. (Do not let freeze.)
The surface temperature should be no lower than 60°F.
Application Procedure
#50208 - Can be brushed/rolled on or spray applied. Spray gun available through DEI, #50209. Stir before use. Do not over-stir or shake. Keep container sealed and airtight for storage.
#50211 - For can spraying only. Shake can well before use. Spray can upside down until nozzle clears for storage.
Test any section in a small area.
Prime over galvanized surfaces.
Apply uniform wet coat of 12-16 mills thick.
A second coat can be applied if needed.
Allow 12 hours between coats.
Allow 24 hours @ 700°f to cure before covering with any materials or applying heat from engine/exhaust systems.
High humidity and lower temps will increase drying time.
Do not force dry with heat.
Clean up with hot water and soap.
Features:
ATAC Spray-On is designed to transform the interior of your vehicle into an oasis of comfort. Say goodbye to the discomfort of excessive heat and annoying noise, and say hello to a serene, cool, and quiet ride!
For Internal Use Only
ATAC is designed exclusively for coating unfinished automotive interiors. Do not apply ATAC to the exterior of any vehicle, motorcycle, RV, SXS or on any surface that will be submerged under water. Do not apply on plastics or other surfaces that are not manufactured from steel or aluminum. Before applying ATAC, thoroughly prepare the surface by following our instructions below. Contact DEI if you have questions on where to apply ATAC or what surface to apply ATAC to.
Surface Prep
Surface should be clean and free from oil, grease, wax, and contaminants.
Rust should be removed or treated. Bare metal should be primed. We recommend a red oxide primer.
Painted surfaces should be scuffed before applying.
Do not apply in temperatures below 60°F. (Do not let freeze.)
The surface temperature should be no lower than 60°F.
Application Procedure
#50208 - Can be brushed/rolled on or spray applied. Spray gun available through DEI, #50209. Stir before use. Do not over-stir or shake. Keep container sealed and airtight for storage.
#50211 - For can spraying only. Shake can well before use. Spray can upside down until nozzle clears for storage.
Test any section in a small area.
Prime over galvanized surfaces.
Apply uniform wet coat of 12-16 mills thick.
A second coat can be applied if needed.
Allow 12 hours between coats.
Allow 24 hours @ 700°f to cure before covering with any materials or applying heat from engine/exhaust systems.
High humidity and lower temps will increase drying time.
Do not force dry with heat.
Clean up with hot water and soap.
Features:
- One piece
- 15 oz. can of ATAC Spray
- Reflects Heat up to 375°F
- Hi-tech ceramic sphere technology dampens noise & vibration
- Perfect for spot protection or small jobs
- Non-toxic and water soluble
- Same great formula as ATAC liquid but in an easy-to-use aerosol spray
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Design Engineering is a company founded by the late Dale Markley back in 1995. Together with his wife, they decided to form a company that would solve the heat issues usually encountered by high-performance vehicles and race cars. Starting in a small place in Cleveland, Ohio, the company grew to become one of the leading companies in providing Thermal Tuning products.
Leading ExpertsFor over twenty five years, the company has provided the industry’s best heat control products. They also have products used as a sound deadening material that creates a conducive environment favored by many audiophiles around the world. By working closely with their customer, they can determine the right design and material that is necessary to control the issue they are facing.
Design Engineering designs and creates all its products in-house. It allows them to control the quality and maintain consistency. Each prototype they make is inspected, fitted, and evaluated, resulting in an end product that is top notched.
Purchase Design Engineering Products At Vivid RacingIf you are in the market for high-quality heat and sound control solutions for your vehicle, then Design Engineering is the brand for you. They cater to various industries such as automotive, aviation, locomotive, motorsports, marine, and Powersports.
They strive to bring all their customers innovative products that would exceed their expectations. To know more about Design Engineering, visit Vivid Racing and check out their list of products that fit your specific requirements. We can guarantee that you will find what you need
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.