If you're looking to beef up your Chevy 305 or 350, this Eagle forged 4340 steel crankshaft is a solid choice. It's got a non-twist forging design, which means it's built to handle some serious power without bending under pressure. The .125" fillet radiuses add just the right amount of strength, so you won't have to worry about it failing when you’re pushing your ride to the limit. Plus, it features a nitrided surface and a micropolished finish, making it not just tough but also smooth as butter for those high RPMs.
This crank is specifically designed for the Chevy 305/350 engines, so you know it’s going to fit right in without any hassle. Just remember, you’ll need to balance it with your specific rods and pistons for optimal performance.
Fits 305/350 engines.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1969-1975, 1981 Chevrolet Bel Air |
Bel Air | 1969-1975, 1981 |
|
1969-1972 Chevrolet Biscayne |
Biscayne | 1969-1972 |
|
1969-1974, 1987-1994 Chevrolet Blazer |
Blazer | 1969-1974, 1987-1994 |
|
1969-1972 Chevrolet Brookwood |
Brookwood | 1969-1972 |
|
1969-1986 Chevrolet C/K 10 |
C/K 10 | 1969-1986 |
|
1988-1999 Chevrolet C/K 1500 |
C/K 1500 | 1988-1999 |
|
1969-1987 Chevrolet C/K 20 |
C/K 20 | 1969-1987 |
|
1988-2000 Chevrolet C/K 2500 |
C/K 2500 | 1988-2000 |
|
1969-1986 Chevrolet C/K 30 |
C/K 30 | 1969-1986 |
|
1988-2000 Chevrolet C/K 3500 |
C/K 3500 | 1988-2000 |
|
1982-1985 Chevrolet C15 |
C15 | 1982-1985 |
|
1983-2000 Chevrolet C35 |
C35 | 1983-2000 |
|
1967-2002 Chevrolet Camaro |
Camaro | 1967-2002 |
|
1969-1996 Chevrolet Caprice |
Caprice | 1969-1996 |
|
1968-1973 Chevrolet Chevelle |
Chevelle | 1968-1973 |
|
1968 Chevrolet Chevy II |
Chevy II | 1968 |
|
1991-1994 Chevrolet Commercial Chassis |
Commercial Chassis | 1991-1994 |
|
1969-1982, 1984-2004 Chevrolet Corvette |
Corvette | 1969-1982, 1984-2004 |
|
2001-2004 Chevrolet Corvette Z06 |
Corvette Z06 | 2001-2004 |
|
1968-1987 Chevrolet El Camino |
El Camino | 1968-1987 |
|
1996-2002 Chevrolet Express |
Express | 1996-2002 |
|
1975-1988 Chevrolet G10 |
G10 | 1975-1988 |
|
1974 Chevrolet G10 Van |
G10 Van | 1974 |
|
1978-1995 Chevrolet G20 |
G20 | 1978-1995 |
|
1978-1995 Chevrolet G30 |
G30 | 1978-1995 |
|
1969-1985, 1994-1996 Chevrolet Impala |
Impala | 1969-1985, 1994-1996 |
|
1975-1986 Chevrolet K5 Blazer |
K5 Blazer | 1975-1986 |
|
1969-1972 Chevrolet Kingswood |
Kingswood | 1969-1972 |
|
1973-1976 Chevrolet Laguna |
Laguna | 1973-1976 |
|
1973-1983 Chevrolet Malibu |
Malibu | 1973-1983 |
|
1970-1988 Chevrolet Monte Carlo |
Monte Carlo | 1970-1988 |
|
1976-1979 Chevrolet Monza |
Monza | 1976-1979 |
|
1969-1979 Chevrolet Nova |
Nova | 1969-1979 |
|
1975-1989 Chevrolet P20 |
P20 | 1975-1989 |
|
1975-1999, 2002 Chevrolet P30 |
P30 | 1975-1999, 2002 |
|
1987 Chevrolet R/V 10 |
R/V 10 | 1987 |
|
1987-1988 Chevrolet R/V 20 |
R/V 20 | 1987-1988 |
|
1987-1988 Chevrolet R/V 30 |
R/V 30 | 1987-1988 |
|
1989 Chevrolet R2500 |
R2500 | 1989 |
|
1989-1991 Chevrolet R3500 |
R3500 | 1989-1991 |
|
2001-2002 Chevrolet Silverado 2500 |
Silverado 2500 | 2001-2002 |
|
2004-2007 Chevrolet Silverado 3500 |
Silverado 3500 | 2004-2007 |
|
1969-2002 Chevrolet Suburban |
Suburban | 1969-2002 |
|
1995-2000 Chevrolet Tahoe |
Tahoe | 1995-2000 |
|
1969-1972 Chevrolet Townsman |
Townsman | 1969-1972 |
|
1989-1991 Chevrolet V3500 |
V3500 | 1989-1991 |

EAGLE SPECIALTY PRODUCTS, aka EAGLE, has been at the forefront of developing top-quality engine components. The company officially started back in 1992 but has been developing their product for ten years prior. Since the company started, it has continuously produced some of the market's best engine components and is widely used by engine builders worldwide.
Imitated But Not DuplicatedDue to the company's success, its products have been imitated by other companies even up to the part numbers. But the similarity ends only up to how they look. EAGLE uses the finest materials and has invested in the most state-of-the-art manufacturing machinery for them to create a product that would be able to take any punishment it is subjected to. It is tested to be superior to other brands and considered the best upgrade for OEM counterparts.
No To ShortcutsThe company sets the benchmark on how valves should be properly made. Using their years of experience creating rods, they have already designed over 200 different rods and 180 crankshafts. The company does not allow cost to compromise its material used, manufacturing process, and quality test.
High-End QualityAll of Eagle's products are made up of high-quality materials. They use certified 4340 Chromoly steel. Using their own special heat treatment process, they are able to create a product that is much stronger compared to other competitors using the same raw material.
They manufacture their rods using a 2-piece forging process that allows the rod to be stronger. This process orients the "grain" of the metal to the direction of the stress. Eagle uses a state-of-the-art Sunnen Krossgrinding system that allows them to create perfect cuts and bore consistently.
Purchase EAGLE rods at Vivid RacingIf you want to upgrade your engine rods to something stronger and more reliable, then EAGLE is the brand for you. With their proven design and formula for creating rods, they have been sought after by top racing teams and engine builders. If they trust Eagle, so can you. Visit Vivid Racing and check out the list of parts specifically for your needs.