1-480-966-3040 Mon-Fri 8am to 5pm AZ
Performance & Aftermarket Car Parts - Vivid Racing Performance & Aftermarket Car Parts - Vivid Racing
Live Chat
Hello, Sign in My Account
Sign In
Wishlist
0
My Cart
My Cart $0.00
  See all Engine products
Eagle Specialty Prod Ford 289/302 Street & Strip Rotating Assembly - 16003030
Eagle Specialty Prod Ford 289/302 Street & Strip Rotating Assembly - 16003030 - Image 3 Eagle Specialty Prod Ford 289/302 Street & Strip Rotating Assembly - 16003030 - Image 2 Eagle Specialty Prod Ford 289/302 Street & Strip Rotating Assembly - 16003030 - Image 3

If you’re looking to breathe new life into your Ford 289 or 302 without diving into a full rebuild, the Eagle Street & Strip Rotating Assembly is a solid choice. I’ve had my hands on these assemblies, and I can tell you, they’re a game changer. Eagle really knows how to pick parts that don’t break the bank while still delivering the quality you need. This assembly is ideal for naturally aspirated street engines and pump gas setups, making it a practical option for everyday driving and spirited weekend runs.

What’s in the box? You’ve got a 3.400” cast crank that’s tough enough to handle some serious RPMs, paired with 5.400” I-Beam rods made from forged 5140 steel—these things are built to last. The pistons? They’re 4.030” flat tops from Mahle, with a -6cc dome volume, which helps keep your compression in check. Plus, the plasma-moly file-fit rings and King SI rod/main bearings ensure you’re getting a reliable seal and smooth operation. Oh, and don’t forget the Pioneer damper and 157 tooth flexplate, both of which are essential for a smooth power transfer.

Features

  • Assembly Balanced: no
  • Balance Type: external 28in-oz
  • Connecting Rod Bolt Diameter: 3/8"
  • Connecting Rod Bolt Material: ARP 8740
  • Connecting Rod Design: I-Beam
  • Connecting Rod Length: 5.400"
  • Connecting Rod Material: forged 5140 steel
  • Crankshaft Center Counterweights: no
  • Crankshaft Flange Bolt Holes: 6
  • Crankshaft Main Journal Diameter: 2.249"
  • Crankshaft Material: cast steel
  • Crankshaft Reluctor: no
  • Crankshaft Rod Journal Diameter: 2.123"
  • Crankshaft Stroke: 3.400"
  • Cylinder Bore Diameter: 4.030"
  • Damper Included: no
  • Flexplate/Flywheel Included: no
  • Main Bearing Type: O.E. Replacement
  • Main Bearings Included: yes
  • Oil Rail Support Included: yes
  • Piston Brand: Mahle
  • Piston Dome Volume: -6cc
  • Piston Face Type: flat top
  • Piston Material: forged 4032 aluminum
  • Piston Pin Diameter: .927"
  • Piston Pin Type: full floating
  • Piston Ring Gap: standard
  • Piston Ring Thickness: 1.0mm, 1.0mm, 2.0mm
  • Rod Bearing Type: O.E. replacement
  • Rod Bearings Included: yes
  • Second Piston Ring Type: reverse twist iron
  • Thrust Washer Included: no
  • Title: Eagle Specialty Products - Street & Strip Rotating Assembly
  • Top Piston Ring Type: barrel faced plasma-moly
  • Just a heads up, you might need to do a bit of clearancing on the block at the bottom of the cylinders and pan rails to get everything to fit just right.

Notes:

Universal Fitment: This assembly is designed to fit a range of applications, but I’d recommend doing a little homework to make sure it’s a good match for your specific setup.

Proposition 65

⚠ WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Eagle Banner

Who is EAGLE?

EAGLE SPECIALTY PRODUCTS, aka EAGLE, has been at the forefront of developing top-quality engine components. The company officially started back in 1992 but has been developing their product for ten years prior.  Since the company started, it has continuously produced some of the market's best engine components and is widely used by engine builders worldwide.

Imitated But Not Duplicated

Due to the company's success, its products have been imitated by other companies even up to the part numbers. But the similarity ends only up to how they look. EAGLE uses the finest materials and has invested in the most state-of-the-art manufacturing machinery for them to create a product that would be able to take any punishment it is subjected to. It is tested to be superior to other brands and considered the best upgrade for OEM counterparts.

No To Shortcuts

The company sets the benchmark on how valves should be properly made. Using their years of experience creating rods, they have already designed over 200 different rods and 180 crankshafts. The company does not allow cost to compromise its material used, manufacturing process, and quality test. 

High-End Quality

All of Eagle's products are made up of high-quality materials. They use certified 4340 Chromoly steel. Using their own special heat treatment process, they are able to create a product that is much stronger compared to other competitors using the same raw material. 

They manufacture their rods using a 2-piece forging process that allows the rod to be stronger. This process orients the "grain" of the metal to the direction of the stress. Eagle uses a state-of-the-art Sunnen Krossgrinding system that allows them to create perfect cuts and bore consistently. 

Purchase EAGLE rods at Vivid Racing

If you want to upgrade your engine rods to something stronger and more reliable, then EAGLE is the brand for you. With their proven design and formula for creating rods, they have been sought after by top racing teams and engine builders. If they trust Eagle, so can you. Visit Vivid Racing and check out the list of parts specifically for your needs.

Check out these other great products