1-480-966-3040 Mon-Fri 8am to 5pm AZ
Performance & Aftermarket Car Parts - Vivid Racing Performance & Aftermarket Car Parts - Vivid Racing
Live Chat
Hello, Sign in My Account
Sign In
Wishlist
0
My Cart
My Cart $0.00
  See all Engine products
Eagle Specialty Prod 4340 Rod 6.000" 2.100 Rod - CRS6000B3D-1

If you’re diving into the world of performance builds, you’re going to want to check out these Forged 4340 Steel H-Beam connecting rods. These aren’t just any rods; they’re crafted from a two-piece forging process, giving them a solid, reliable structure that can take the heat—literally. The surface is fully machined and shot-peened, which not only enhances durability but also helps with fatigue resistance. You’ll appreciate the attention to detail here; sizing is held to exact tolerances, so you know you’re getting quality.

Now, if you’re working with a Chevrolet Small Block, these rods come in at a length of 6.000 inches, making them a great fit for a variety of builds. Just make sure you specify the weight you need when you order. They’re recommended for competition use, so you know they’re built to perform under pressure.

Here’s a quick rundown of the specs: the big end width is 0.94 inches, and they come with 7/16" ARP 8740 bolts, which are known for their strength. They’re also bushed for a full-floating piston pin, adding to their versatility. The center to center length is 6 inches, and the housing bore measures in at 2.225 inches. The pin end width is a solid 1.06 inches, with a pin size of 0.927 inches. And let’s not forget the rod journal, which is 2.1 inches. When it comes to torque, you’ll want to set it to 63 ft-lbs using ARP moly lube only—don’t skimp on that!

One thing to keep in mind is that while these rods are designed to fit a range of vehicles, it’s always a good idea to do your homework on compatibility. You want to make sure they’ll work with your specific setup. The part number you’re looking for is CRS6000B3D-1, which is the Eagle Specialty Products 4340 Rod, 6.000" 2.100 Rod.

Just a heads up, this product does contain nickel, which is known to the State of California to cause cancer, so keep that in mind if you’re in that area.

In short, if you’re serious about your engine build and need rods that can handle the power, these Forged 4340 H-Beam rods are worth considering. They’re tough, reliable, and ready to take your performance to the next level.

Proposition 65

⚠ WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Eagle Banner

Who is EAGLE?

EAGLE SPECIALTY PRODUCTS, aka EAGLE, has been at the forefront of developing top-quality engine components. The company officially started back in 1992 but has been developing their product for ten years prior.  Since the company started, it has continuously produced some of the market's best engine components and is widely used by engine builders worldwide.

Imitated But Not Duplicated

Due to the company's success, its products have been imitated by other companies even up to the part numbers. But the similarity ends only up to how they look. EAGLE uses the finest materials and has invested in the most state-of-the-art manufacturing machinery for them to create a product that would be able to take any punishment it is subjected to. It is tested to be superior to other brands and considered the best upgrade for OEM counterparts.

No To Shortcuts

The company sets the benchmark on how valves should be properly made. Using their years of experience creating rods, they have already designed over 200 different rods and 180 crankshafts. The company does not allow cost to compromise its material used, manufacturing process, and quality test. 

High-End Quality

All of Eagle's products are made up of high-quality materials. They use certified 4340 Chromoly steel. Using their own special heat treatment process, they are able to create a product that is much stronger compared to other competitors using the same raw material. 

They manufacture their rods using a 2-piece forging process that allows the rod to be stronger. This process orients the "grain" of the metal to the direction of the stress. Eagle uses a state-of-the-art Sunnen Krossgrinding system that allows them to create perfect cuts and bore consistently. 

Purchase EAGLE rods at Vivid Racing

If you want to upgrade your engine rods to something stronger and more reliable, then EAGLE is the brand for you. With their proven design and formula for creating rods, they have been sought after by top racing teams and engine builders. If they trust Eagle, so can you. Visit Vivid Racing and check out the list of parts specifically for your needs.

Check out these other great products