.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Lotus Esprit
Select the year of your Lotus Esprit:
EBC Brakes SH002 Titanium Heat Insulation Shims
For automotive enthusiasts looking to enhance their braking performance, the EBC Brakes SH002 titanium heat insulation shims are a game changer. These innovative shims have been rigorously tested in laboratory settings, showing a remarkable ability to reduce heat transfer from the brake pads to the caliper by approximately 90°F. This means cooler, more consistent braking performance, especially during those spirited drives or track days.
Installation Instructions
Installing the SH002 shims is straightforward, but attention to detail is key. Follow these steps to ensure optimal performance:
- Ensure the shims are flat and fit snugly against the rear of the brake pad without any gaps.
- If your brake pads come with stock rubberized shims, these need to be removed before installing the titanium shims to prevent any over-thickness issues.
- Use a blunt edge screwdriver to carefully break the adhesive seal of the old shims. Once removed, lightly sand the rear of the pad to eliminate any leftover glue or surface irregularities.
- Position the new titanium shims firmly against the pad backing plate, ensuring there’s no debris in between to avoid a spongy brake pedal feel.
- For sliding calipers, apply the two shims to the pads located next to the piston. Multi-piston calipers will require shims for all four pads on the axle set.
Fitment
The SH002 shims are compatible with a variety of high-performance brake setups, including:
- AP Racing CP3307
- AP Racing CP3799
- AP Racing CP5040-2
- AP Racing CP5040-30
- AP Racing CP5200
- AP Racing CP5830
- AP Racing CP5835
- AP Racing CP5880
- AP Racing CP6267
- AP Racing CP6320
- AP Racing CP6720
- AP Racing CP6730
- AP Racing CP6740
- AP Racing CP9200
- AP Racing CP9202
- AP Racing CP9440
- AP Racing CP9441
- EBC Brakes Racing Apollo-4 (100 Series)
- Hi-Spec Monster 4
- Hi-Spec Monster 6
- Hi-Spec Monster Race 4
- Hi-Spec Monster Race 6
- Hi-Spec R132-4
- Hi-Spec R132-6
- Hi-Spec RR132
- K-Sport 6 Pot
- Lotus Carlton 3.6 (1990-1994)
- Lotus Esprit 3.5 (1999-2003)
- Lotus Esprit Sport 300 2.2 (1993)
- Noble M12 2.5 (1999-2002)
- Opel Omega Lotus 3.6 (1990-1994)
- Vauxhall Carlton 3.6 (1990-1994)
Customer Feedback
Lotus Esprit owners have reported significant improvements in braking performance after installing these shims. One owner mentioned, "After putting the SH002 shims on my 1999 Lotus Esprit, I noticed my brakes stayed cooler during track sessions, giving me more confidence to push harder into corners." This kind of feedback speaks volumes about the value these shims add to your braking system.
Upgrade your braking system with the EBC Brakes SH002 titanium heat insulation shims and experience the difference in performance and reliability on your next drive.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1993, 1999-2003 Lotus Esprit |
Esprit | 1993, 1999-2003 |
Who is EBC?
Making the car stop fast is equally important as making it go fast. When upgrading your vehicle, you need to consider improving its braking system in order for you to have a more enjoyable driving experience. There are a lot of brake manufacturers out there in the market but only a few can really claim an actual performance gain and one of them is EBC.
How It StartedEBC was founded in 1978 and is known as one of the largest producers of brake components in the automotive industry. With its humble beginning starting in a single van, they are now a multinational company with facilities in the UK and the US and is the leader in the industry.
A Product For Your Every NeedEBC has one of the largest inventories of brake discs and pads with over 5000 part numbers for every vehicle imaginable. This allows them to cater to a wide range of customers whatever car you own, whenever you are in the world. The company even offers pads for the military such as their Humvee, armoured vehicles and tanks.
A Pad For Every OccasionThe company manufactures different types of brake pads depending on the required application. They manufacture sintered pads, aramid, ceramic and carbon brake pads. They also offer either steel or stainless rotors.
SafetyEBC’s goal is to provide not just a high-performing brake pad, but it should be safe and dependable. With the current emergence of cheap knock-offs brake pads, EBC maintains its commitment to providing brake pads that you can put your trust on. All their pads are tested rigorously making sure that it can perform and function as it should, whatever the condition may be.
Purchase EBC Brakes at Vivid RacingIf you are in search of brake components that would not fail on you when you need them the most, then EBC is the brand for you. Visit Vivid Racing and check out the list of parts that would fit your specific needs.
Automotive Disc Brake Pads
The EBC Brakes warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is good for a period of twelve months from date of purchase or 10,000 miles of highway use. Proof of mileage will be required. Warranty is invalid if product is used for taxi/hire car, racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
Automotive Disc Brake Rotors
Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is valid for a period of six months from date of purchase or 10,000 miles of highway use. Warranty is invalid if product is used for racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
No warranty is offered for brake vibration suffered due to uneven rotor thickness wear after incorrect installation of brake rotors. It is commonly known in the brake rotor business that accurate mounting and checking of runout on brake rotors is paramount at installation and in spite of necessary warnings many mechanics still see fit to ignore this warning and make no effort whatsoever to check rotor runout. This leads to brake vibration in the 3-5,000 miles lifetime period and is not a warrantable condition. The solution for vibration at this stage is to have the rotors turned or replaced and to thoroughly clean the mounting flange on the vehicle and carefully check for runout before returning the vehicle to service use.
Motorcycle Street Bike Disc Brake Pads
The EBC Brakes warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as collection, fitting, inconvenience, purchasing of other manufacturers products and is good for a period of twelve months from date of purchase or 5,000 miles of highway use. Proof of mileage will be required. Warranty is invalid if product is used for taxi/hire car, racing, trackday experience riding, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Riders must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
Motorcycle Street Bike Disc Brake Rotors
Warranty is for replacement of similar product or refund of purchase value only, excluding all labour and ancillary charges such as collection, fitting, inconvenience, purchasing of other manufacturers' products and is valid for a period of twelve months from date of purchase or 5,000 miles of highway use. The warranty will expire, irrespective of mileage, after a period of 12 months from date of delivery. Warranty is invalid if product is used for racing, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Riders must assess the performance and durability of EBC Brakes' products themselves if any EBC product is to be used in racing. EBC also strongly recommends the use of its own EBC brand brake pads to run with the EBC rotors and numerous other aftermarket brands have been found to damage EBC rotors. The EBC rotor and pad is sold as a matched set and developed to work together, do not risk damaging your rotors with using a pad that may damage your new EBC rotor product.
Motorcycle Dirt Bike and ATV/UTV Disc Brake Rotors
Warranty on off road brake rotors covers manufacturing and size/fitment defects only and does not cover wear and tear which is almost impossible to evaluate in off road conditions and is limited to replacement of the supplied parts only. No claims for ancillary costs such as fitting, removal or shipping costs is included in the standard EBC warranty.
Motorcycle Dirt Bike and ATV/UTV Disc Brake Pads
Warranty on off road brake pads covers manufacturing and size/fitment defects and brake efficiency aspects only and does not cover any form of wear and tear or product lifetime which is almost impossible to evaluate in off road conditions .Warranty is limited to replacement of the supplied parts only. No claims for ancillary costs such as fitting, removal or shipping costs ids included in the standard EBC warranty. Users and installers attention is drawn emphatically to the brake selector charts shown elsewhere on this website and accessed via the link below when choosing brake pad materials as there is a VAST difference in longevity between different grades offered by the Company. Rapid wear can result due to incorrect pad selection or recommendation.
How to proceed with a warranty claim
A proof of purchase receipt showing the date of purchase and mileage installed, endorsed by an independent mechanic who fitted the parts or a store staff member who sold you the parts will be required to be returned with all of the products purchased. To enable your vehicle to be used whilst your warranty claim is considered, should you need to purchase replacement parts this must be done by purchasing the parts from EBC themselves. In the event of a successful compensation award, we will refund the credit card that you used to buy the replacement parts in full or part depending on the nature of the claim. EBC Brakes reserves the right to make full or partial compensation at its sole discretion depending upon the condition and mileage used of the returned suspect parts. For example, if you have used the product for several thousand miles and the defect is noticed, only a partial compensation may be offered.
The EBC Brakes warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is good for a period of twelve months from date of purchase or 10,000 miles of highway use. Proof of mileage will be required. Warranty is invalid if product is used for taxi/hire car, racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
Automotive Disc Brake Rotors
Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is valid for a period of six months from date of purchase or 10,000 miles of highway use. Warranty is invalid if product is used for racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
No warranty is offered for brake vibration suffered due to uneven rotor thickness wear after incorrect installation of brake rotors. It is commonly known in the brake rotor business that accurate mounting and checking of runout on brake rotors is paramount at installation and in spite of necessary warnings many mechanics still see fit to ignore this warning and make no effort whatsoever to check rotor runout. This leads to brake vibration in the 3-5,000 miles lifetime period and is not a warrantable condition. The solution for vibration at this stage is to have the rotors turned or replaced and to thoroughly clean the mounting flange on the vehicle and carefully check for runout before returning the vehicle to service use.
Motorcycle Street Bike Disc Brake Pads
The EBC Brakes warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as collection, fitting, inconvenience, purchasing of other manufacturers products and is good for a period of twelve months from date of purchase or 5,000 miles of highway use. Proof of mileage will be required. Warranty is invalid if product is used for taxi/hire car, racing, trackday experience riding, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Riders must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
Motorcycle Street Bike Disc Brake Rotors
Warranty is for replacement of similar product or refund of purchase value only, excluding all labour and ancillary charges such as collection, fitting, inconvenience, purchasing of other manufacturers' products and is valid for a period of twelve months from date of purchase or 5,000 miles of highway use. The warranty will expire, irrespective of mileage, after a period of 12 months from date of delivery. Warranty is invalid if product is used for racing, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Riders must assess the performance and durability of EBC Brakes' products themselves if any EBC product is to be used in racing. EBC also strongly recommends the use of its own EBC brand brake pads to run with the EBC rotors and numerous other aftermarket brands have been found to damage EBC rotors. The EBC rotor and pad is sold as a matched set and developed to work together, do not risk damaging your rotors with using a pad that may damage your new EBC rotor product.
Motorcycle Dirt Bike and ATV/UTV Disc Brake Rotors
Warranty on off road brake rotors covers manufacturing and size/fitment defects only and does not cover wear and tear which is almost impossible to evaluate in off road conditions and is limited to replacement of the supplied parts only. No claims for ancillary costs such as fitting, removal or shipping costs is included in the standard EBC warranty.
Motorcycle Dirt Bike and ATV/UTV Disc Brake Pads
Warranty on off road brake pads covers manufacturing and size/fitment defects and brake efficiency aspects only and does not cover any form of wear and tear or product lifetime which is almost impossible to evaluate in off road conditions .Warranty is limited to replacement of the supplied parts only. No claims for ancillary costs such as fitting, removal or shipping costs ids included in the standard EBC warranty. Users and installers attention is drawn emphatically to the brake selector charts shown elsewhere on this website and accessed via the link below when choosing brake pad materials as there is a VAST difference in longevity between different grades offered by the Company. Rapid wear can result due to incorrect pad selection or recommendation.
How to proceed with a warranty claim
A proof of purchase receipt showing the date of purchase and mileage installed, endorsed by an independent mechanic who fitted the parts or a store staff member who sold you the parts will be required to be returned with all of the products purchased. To enable your vehicle to be used whilst your warranty claim is considered, should you need to purchase replacement parts this must be done by purchasing the parts from EBC themselves. In the event of a successful compensation award, we will refund the credit card that you used to buy the replacement parts in full or part depending on the nature of the claim. EBC Brakes reserves the right to make full or partial compensation at its sole discretion depending upon the condition and mileage used of the returned suspect parts. For example, if you have used the product for several thousand miles and the defect is noticed, only a partial compensation may be offered.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.