If you're looking to upgrade your Ford Mustang's braking system, the EBC Brakes S11KR Kit is a fantastic choice. This rear disc brake pad and rotor kit, specifically designed for the 2005-2010 Ford Mustang with a 4.0L V6 engine, offers a perfect blend of performance and reliability.
When installing this kit, it's essential to note that you should not upgrade the rear pads unless the same upgrade is applied to the front. The Thermic Black coating on the rotors does not need to be removed prior to installation. This coating acts as an anti-corrosion layer, providing long-lasting resistance against rust. It will naturally wear off in the pad swept area during the first 10 to 20 stops after installation.
Yes, this EBC Brakes kit is specifically designed for the 2005-2010 Ford Mustang with a 4.0L V6 engine, ensuring a perfect fit and optimal performance.
No, the Thermic Black coating does not need to be removed. It will wear off naturally during the initial use of the brakes.
It's not recommended to use brake cleaner or any method to remove the Thermic Black coating, as this is not covered under the EBC warranty.
Customers have praised the EBC Brakes S11KR Kit for its smooth braking performance and ease of installation. Many have noted a significant improvement in their Mustang's stopping power and overall driving experience. Users have also appreciated the cost savings compared to purchasing individual components.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Ford Mustang | 2005-2010 | Base |
| Ford Mustang | 2005-2008 | GT |
| Ford Mustang | 2007-2009 | Lujo |
| Ford Mustang | 2007-2008 | Shelby GT |
| Ford Mustang | 2008 | Shelby GT500 |
| Ford Mustang | 2008-2009 | Bullitt |
| Ford Mustang | 2009-2010 | Shelby |
Making the car stop fast is equally important as making it go fast. When upgrading your vehicle, you need to consider improving its braking system in order for you to have a more enjoyable driving experience. There are a lot of brake manufacturers out there in the market but only a few can really claim an actual performance gain and one of them is EBC.
How It StartedEBC was founded in 1978 and is known as one of the largest producers of brake components in the automotive industry. With its humble beginning starting in a single van, they are now a multinational company with facilities in the UK and the US and is the leader in the industry.
A Product For Your Every NeedEBC has one of the largest inventories of brake discs and pads with over 5000 part numbers for every vehicle imaginable. This allows them to cater to a wide range of customers whatever car you own, whenever you are in the world. The company even offers pads for the military such as their Humvee, armoured vehicles and tanks.
A Pad For Every OccasionThe company manufactures different types of brake pads depending on the required application. They manufacture sintered pads, aramid, ceramic and carbon brake pads. They also offer either steel or stainless rotors.
SafetyEBC’s goal is to provide not just a high-performing brake pad, but it should be safe and dependable. With the current emergence of cheap knock-offs brake pads, EBC maintains its commitment to providing brake pads that you can put your trust on. All their pads are tested rigorously making sure that it can perform and function as it should, whatever the condition may be.
Purchase EBC Brakes at Vivid RacingIf you are in search of brake components that would not fail on you when you need them the most, then EBC is the brand for you. Visit Vivid Racing and check out the list of parts that would fit your specific needs.