Stay safe with an ER Spec Drift Car Roll Cage. Designed to protect you and manufactured with durable steel, this cage is a professional grade upgrade to your vehicle's safety profile. It's a must-have safety feature for any race vehicle.
This drift car roll cage is weld-on, not bolt-in, therefore we strongly recommend these be installed by a professional fabricator experienced with installing roll cages.
Features: - The drift car roll cage is made from 1.50" X 0.095 DOM Mild steel
- DOM Tensile Strength = 70,000 PSI
- Diameter: 1.5"
- Thickness: 0.095"
- ID: 1.31"
- Cross Sect. Area (in^2): 0.42
- Tensile Strength: 29,352 lbs
- Weight (lb/ft): 1.426 lb
- You can do the X brace or the Nascar-style ladder at the doors
- Main Hoop and Roof Hoop are wider than most cages and hug the chassis nicely
- Interior panels must be removed
- Meant to be used with factory dash bar
- Windshield runners fit in between the dash and door
- Cage Includes:
- Diagonal, 2-Piece Crossmember for Main Hoop
- Cage Plates for floor mount and boxes
- Formula D Legal Intrusion Bars
- Dimple Plate Dimensions: 24" x 6" x 1/8
- These cages are weld-in, not bolt-in. They do NOT come pre-notched.
Fitment: Note(s): - This Roll Cage is designed for the Hard Top 350z. It will not fit Convertibles / Roadsters.
- Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.
- This cage will require the final fit, notching, and welding to be done by a qualified professional familiar with installing roll cages.
- Cages are built to order and can take 1 week to build and ship.