Save up to 40% on VR Forged wheel sets! - Shop Now
SEATS - AFFIRM
  See more parts for your BMW 535i

Evolution Racewerks OEM Style Charge Pipe Brushed Finish BMW 535i N54 E60 07-10

$274.95 SALE: $247.46

Evolution Racewerks

Model #BM-ICP004S


Shopper Award

The factory diverter valves were causing an issue of not being able to hold up against the rigors of high boost application, therefore they needed to be replaced. Thus attention was brough to the factory diverter valve pipe and the need to optimize for maximum performance on a race car facilitated the need for a new pipe to be built. Often ignored, charged intake airflow characteristics greatly affect throttle response, turbo lag and ultimately maximum power potential. Smooth bends and minimal obstructions are ideal. This is not the case with the factory diverter valve charge pipe. On the factory diverter valve chargepipe features a sound baffle for the diverter valves. This sound baffle is connected on the side of the factory diverter valve charge pipe which splits airflow. This causes turbulence inside the pipe which slows the charge intake air velocity (speed of the air traveling inside the pipe). By removing this turbulence (by eliminating the factory diverter valve sound baffle), increased throttle response, decrease turbo lag and ultimately higher maximum power potential can be realized. Our Diverter Valve Charge Pipe eliminates this sound baffle and thus eliminating the unneccesary turbulence in the diverter valve pipe, keeping charge intake air velocity at it's maximum.

Since one of the reasons for changing out the factory diverter valves was to prevent boost leaks (from prematurely opening on high boost), causing boost leaks while upgrading the diverter valve would be counterproductive. During our research and development, the connection at the throttle body was looked over very carefully. The factory diverter valve is connected to the throttle body using an o-ring inside the throttle body flange which is locked in place by a c-clip, which works very well. It also make removal/installation quick and easy. Our testing had shown it could hold quite a bit of boost. During our testing, we had pressure tested this connection up to 25 PSI. The reason why we stopped at 25 PSI was because at 25 PSI, one of the intake pipes on the turbo blew off and we could not test any higher. Hoewver, we were confident that it would easily hold over 25 PSI as the throttle body flange showed no signs of failing. Also, keep in mind, this type of connection is used throughout the engine, in many crutial areas like the coolant radiator system as well as the clutch system. If BMW did not believe in the durability of this type of connection, they would not use it in such important areas.

Many of Evolution Racewerks' competitors use a silicone hose connection for the throttle body connection. It is not designed for a silicone hose connection which is used by all the other brand diverter valve pipe upgrades in the market. The throttle body lip is too short and there are no "beads" to prevent the silicone hose from blowing off under boost. Even though it is the easiest way to "rig" together, it is not ideal. The best way to connect the new diverter valve pipe to the throttle body is to replicate the same connection which we did. Evolution Racewerks spent a lot of resources developing and manufacturing this factory style connection for this reason.

The same issue came with the MAP sensor. The MAP sensor seals to the factory diverter valve pipe via a o-ring on the sensor itself. Having a hole in a silicone hose will definitely cause a boost leak as it will not properly seal. Therefore, again Evolution Racewerks CNC machined a replica MAP sensor flange that utilizes the same factory o-ring seal.

Features:

  • Increase throttle response and decreases turbo lag.
  • Compatible with factory diverter valves or aftermarket factory style diverter valves.
  • Lightweight High Grade 6061 Aluminum Piping.
  • Throttle body matched 3" piping.
  • Retains factory style o-ring throttle body lock flange. Precision CNC machined throttle body flange ensures leak free connection to throttle body. Quick and easy connection and disconnection to throttle body. Ideal connection compared to the silicone hose and hose clamp connection found in all other aftermarket diverter valve upgrade pipes available in the marketplace.
  • Precision CNC machined MAP sensor flange ensures leak free connection.
  • Diverter Valve Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost.
  • Factory diverter valve sound baffle, which causes turbulence in the factory pipe, is removed.
  • Includes all hardware for complete installation.
  • Limited Lifetime Warranty.
Fitment:
  • BMW 535i N54 E60 07-10
Notes:
  • Images are used for marketing purpose only actual product may vary!
  • This product is intended for OFF ROAD USE ONLY.
  • Not legal for use on pollution controlled vechiles upon public highways.
  • This item is not for sale, installation, or use on licensed vehicles in the state of California.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2007-2010
BMW 535i

About Evolution Racewerks

Evolution Racewerks started out as a custom fabrication shop in 2004. Its experienced staff of fabricators and welders can virtually craft any part that you want. Evolution Racewerks’ talented welders (TIG & MIG) are skilled at working with aluminum, stainless steel, and titanium. The company takes pride in helping petrolheads build their dream race car from the ground up. Evolution Racewerks has you covered from the beginning stages of chassis preparation, which includes steam welding and roll cage construction, to the complete assembly of the car. 

Evolution Racewerks Can Do It All

If you dream it, Evolution Racewerks can build it. The company specializes in a number of different areas that all come together to create automotive works of art. Evolution Werks’ experienced technicians can install just about any part you may have. Nothing is impossible with the team’s custom fabrication, tuning, and suspension skills. The brand is known for fabricating custom welded (TIG & MIG) steel, stainless steel, aluminum, and titanium parts. As aforementioned, Evolution Racewerks’ specialty lies in roll cage assembly and chassis welding, as they have built numerous roll cages to meet all racing rules set in place by sanctioning bodies. Whether it is NHRA drag racing, SCCA, drifting, or road racing, Evolution Racewerks can do it all. 

Evolution Racewerks takes pride in being a one-stop shop for building, servicing, and pit crewing for your race car. It boasts years of experience building race cars for its customers, many of which brought home trophies and were featured in several magazines.

Evolution Racewerks at Vivid Racing

Vivid Racing has an extensive inventory of Evolution Racewerks products that will enhance the look, sound, and performance of your vehicle. We carry intercoolers and intercooler pipes, catted and catless downpipes, oil cooler upgrades, charge pipe kits, brake lines, and more! If you have any questions regarding the parts listed above or about Evolution Racewerks, please contact our sales team at (480) 966-3040.

Check out these other great products