See more parts for Jeep Wrangler
Select the year of your Jeep Wrangler:
Product thumb
Fabtech 3" Trail Lift Kit for Jeep JL 4WD Gas 4-Door 2021-2023 with Dirt Logic Coilovers & Shocks
$4882.89
Free Shipping Hurry Low Stock

Fabtech K4230DL 3" Trail Lift Kit

Upgrade your Jeep JL 4WD Gas 4-Door (2021-2023) with the Fabtech K4230DL 3" Trail Lift Kit, designed to enhance your off-road experience while maintaining on-road comfort. This comprehensive suspension system features Dirt Logic 2.5 Resi Front Coilovers and 2.25 Resi Rear Shocks, ensuring you tackle any terrain with confidence.

Key Features:

  • Complete Short Arm Suspension: Utilizes factory control arm mounts for a straightforward installation.
  • Heavy-Duty Link Arms: Constructed from 1.75" OD, .250" thick wall steel tubing, these arms are built to last and resist bending.
  • Corrosion-Resistant Coilovers: The Dirt Logic 2.5 Coilovers are the only all stainless steel body shocks available, providing superior durability.
  • Draglink Flip System: Maintains factory steering geometry, ensuring safe and efficient handling.
  • Dual Rate Long Travel Coil Springs: Offers a comfortable ride over small bumps while absorbing larger impacts.

Benefits:

Customers have noted a significant improvement in ride quality both on and off-road. One user commented, "I was blown away by how smooth my Jeep rides now. Whether I'm on the highway or tackling rocky trails, the K4230DL kit has transformed my driving experience!"

The heavy-duty construction means you can trust this kit to handle the rigors of off-road adventures. With features like bump stop extensions and sway bar links, you can expect a reliable and safe ride even in extreme conditions.

Technical Specifications:

  • Front Dirt Logic 2.5 Resi Coilover:
    • 2.5" OD Stainless Steel Body
    • 2.25" OD Billet Aluminum Piston
    • 7/8" NitroSteel® Black Piston Rod
    • Cold wound dual rate coil springs
  • Rear Dirt Logic 2.25 Resi Shock:
    • 2.25" OD Stainless Steel Body
    • 2.0" OD Billet Aluminum Piston
    • 7/8" NitroSteel® Black Piston Rod

Installation Instructions:

For detailed installation instructions, please refer to the following links:

Fitment:

  • Jeep JL 4WD Gas 4-Door (2021-2023)

Important Notes:

  • Fits 4-door models only.
  • Does not fit 4XE or Rubicon 392 models.
  • Front driveshaft is required (Order FTS94057).
  • Heavy off-road use may require rear driveshaft (Order FTS94065).

Other Part Numbers:
Fabtech #fabK4230DL

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Jeep Wrangler 2021 Unlimited Islander
Jeep Wrangler 2021-2022 Unlimited Rubicon 392
Jeep Wrangler 2021-2022 Unlimited Sahara Altitude
Jeep Wrangler 2021 Unlimited 80th Anniversary
Jeep Wrangler 2021-2022 Unlimited Sport Altitude
Jeep Wrangler 2021-2023 Willys Sport
Jeep Wrangler 2021 Unlimited Freedom
Jeep Wrangler 2021-2022 Unlimited High Altitude 4xe
Jeep Wrangler 2021-2023 Sport S
Jeep Wrangler 2021-2022 Unlimited Willys Sport
Jeep Wrangler 2021-2022 Unlimited Sahara
Jeep Wrangler 2021-2022 Unlimited Sahara High Altitude
Jeep Wrangler 2021-2022 Unlimited Sport
Jeep Wrangler 2021-2023 Sport
Jeep Wrangler 2021-2023 Rubicon
Jeep Wrangler 2021, 2023 Freedom
Jeep Wrangler 2021-2022 Unlimited Rubicon 4xe
Jeep Wrangler 2021-2023 Unlimited Rubicon
Jeep Wrangler 2021-2022 Unlimited Sahara 4xe
Jeep Wrangler 2021 80th Anniversary
Jeep Wrangler 2021-2022 Unlimited Willys
Jeep Wrangler 2021-2023 Willys
Jeep Wrangler 2021 Islander
Jeep Wrangler 2021-2022 Unlimited Sport S
Jeep Wrangler 2021-2022 Unlimited High Altitude
Jeep Wrangler 2022 Unlimited Rubicon Tuscadero
Jeep Wrangler 2022 Unlimited High Tide
Jeep Wrangler 2023 Sahara Altitude
Jeep Wrangler 2023 High Tide
Jeep Wrangler 2023 Willys 4xe
Jeep Wrangler 2023 Rubicon 4xe
Jeep Wrangler 2023 Rubicon 392
Jeep Wrangler 2023 Sahara 4xe
Jeep Wrangler 2023 Unlimited Rubicon Xtreme Sunrider
Jeep Wrangler 2023 Sahara High Altitude
Jeep Wrangler 2023 High Altitude
Jeep Wrangler 2023 Sahara
Jeep Wrangler 2023 High Altitude 4xe
Jeep Wrangler 2023 Sport Altitude

Fabtech Banner

Who is Fabtech?

Fabtech is an aftermarket automotive company that specializes in creating suspension parts for various pick-up trucks, SUVs, and other offroad vehicles. They have been doing the business for more than 20 years and have consistently provided their customer products that are top-notched and have garnered multiple awards for its innovative design. Today, they have established their brand as one of the leading companies in the market.

Advanced Manufacturing Facility

The company uses advanced technology to its advantage in creating its products. By utilizing the most high-tech software available, they are able to create designs that are on the cutting edge. All their works and manufacturing processes are done in house using their 100,000 sq feet facility. It houses multiple laser cutters, forming equipment, CNC machines, robotic welders not to mention the leading skilled welders and engineers that help the company create a consistent product that has the same high quality expected from them.

Fabtech creates their product to be easy to install and should provide a trouble-free experience to all their clients. Their product comes with all the necessary hardware needed and is a direct fit to the original parts’ location.

All their products have been tried and tested rigorously to make sure that it passes the high-quality standard the company has imposed on itself. This allows their customers to have a product that is superior to its competitors and functions the way it’s supposed to do.

Purchase Fabtech Products at Vivid Racing

If you want a suspension to upgrade for your vehicle that would be able to improve the way your car look and perform, then Fabtech is the brand for you. They offer products for different vehicles makes such as the ones from Toyota, GM, Ford, Nissan, Chevy and Jeep to name a few. Visit Vivid Racing and check out the list of their products that would fit your specific vehicle.

The Limited Lifetime Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, uniballs, tie rod ends, limiting straps, cross shafts, heim joints and driveshafts. These parts are subject to wear and are not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship.

Dirt Logic and Performance Coilover take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks are covered under our Limited Lifetime Warranty.

Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech's instructions. Alterations to the finish of the parts including but not limited to painting, powder coating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping, which is considered normal and is not covered under warranty.

Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. (A "RACE" is defined as any contest between two or more vehicles, or any contest of one or more vehicle against the clock, whether or not such contest is for a prize). This warranty does not include coverage for police or taxi vehicles, race vehicles, or vehicles used for government or commercial purposes. Also excluded from this warranty are sales outside of the United States of America.

Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle's susceptibility to a rollover, on road and off road, at all speeds. Extreme care should be taken to operate the vehicle safely at all times to prevent rollover or loss of control resulting in serious injury or death. Fabtech front end Desert Guards may impair the deployment or operation of vehicles equipped with supplemental restraining systems/air bag systems and should not be installed if the vehicle is equipped as so.

Fabtech makes every effort to ensure suspension product compatibility with all vehicles listed on the website, but due to unknown auto manufacturer's production changes and/or inconstancies by the auto manufacturer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The Tire and Wheel sizes listed in Fabtech's website are only a guideline for street driving with noted fender trimming. Fabtech is not responsible for damages to the vehicle's body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.

Fabtech's obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the defective product only. All costs of removal, installation or re-installation, freight charges, incidental or consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or non related to the installed Fabtech product. This warranty is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse or misuse as determined by Fabtech.

Fabtech suspension components must be installed as a complete system including shocks as shown on our website. All warranties will become void if Fabtech parts are combined and/or substituted with other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death. Fabtech does not warrant products not manufactured by Fabtech.

Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension not all vehicles may have the same ride stance front to rear as described in the website. The blue color of suspension components shown in all Fabtech photographs are for display purposes only. Majority of all Fabtech components will be black specifically where noted with part numbers ending in BK.

Installation of Fabtech product may void the vehicles factory warranty; it is the consumer's responsibility to check with their local vehicle's dealer for warranty disposition before the installation of the product. Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension product to comply with such written laws.

It is the responsibility of the distributor and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase.

Fabtech reserves the right to super cede, discontinue, change the design, finish, part number and/or application of parts when deemed necessary without written notice. Fabtech is not responsible for misprints or typographical errors within the website or price sheet.

Check out these other great products