$75.74
SALE: $72.13
Model #FPE-CP3X2
Take full control of your Cummins dual CP3s using your just your ECM. The CP3X2 harness allows you to control your Cummins dual pumps without an expensive dual pump controller.
We recommend multiplying the stock FCA current table (D0787) on the Cummins ECMs by 1.6-1.7 as a place to start. The FCA current varies from truck to truck based on the solenoid characteristics, age, and idle lift pump pressure.
Higher lift pump pressures at idle will require more amperage at the top of the table (low desired fuel flow) to keep the rail at its target pressure. If the truck will not start after multiplying the table by 1.7, revert back to the original tune and multiply by a smaller number until the truck starts easily, yet maintains the target rail pressure at idle.
This is one of the more time consuming calibration procedures on heavily modified trucks, so make calculated changes, so that you can dial it in as quickly as possible.
Once you have the truck idling at the correct target pressure you may need to modify the middle and lower portions of the table to prevent rail pressure overshoot or undershoot. Again, methodical changes in the FCA table will yield the best results.
Use the EFILive Scan Tool to log your changes and adjust in the Tuning Tool as necessary. Keep in mind, more current is less flow, and less current is more, zero current being full flow from all pumps. Theoretically you should be able to control 3 pumps. The table will allow the driver to deliver up to 5 amps of current.
Other Part Numbers:
Fleece Performance #FPE-CP3X2-FQWW
WARNING: Cancer and Reproductive Harm
Fleece Performance is an aftermarket company established in 2008 in North Salem, IN, by Brayden and Chase Fleece. The company is known for manufacturing performance parts for various diesel engines. Today, Fleece Performance is the leading brand in the market when it comes to diesel aftermarket parts.
The company’s founders Brayden and Chase, are fellow enthusiasts themselves. They decided that they wanted to improve the products already existing in the market. Using their vehicle as their product’s testbed, they created some of the best parts available today. As a result, they have established a reputation as a brand that provides innovative products that pushed the limits of diesel performance technology.
The company offers a wide range of turbochargers, AN Fittings, Fuel system parts, and cylinder head kits. They cater to a variety of automotive brands such as Ford, Dodge, and Chevy. Each product is carefully designed to produce optimum performance and is developed, assembled, and tested in their in-house facility.
The company received its ISO certification in 2020, which shows that the company adheres to the strict standard set by the regulators.
If you are in the market for high-quality diesel performance parts, then Fleece Performance is the brand for you. They have been manufacturing quality parts for more than ten years and has gained the trust of many diesel enthusiast and racers alike. To know more about Fleece Performance, visit Vivid Racing and check out their list of products that fit your specific need.