Wheel Blowout Sale
SEATS - AFFIRM
  See more parts for your Nissan Skyline R32

Haltech Elite 2500 Plug and Play Adaptor Harness Kit Nissan Skyline R32 | 33 | R34 GT-R

$2,399.00

Haltech

Model #HT-151357

In Stock


Shopper Award

This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles.

Purchasing this product requires you to sign our Vehicle Compliance Waiver here.

This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory harness. A quick and easy plug'n'play upgrade solution.

Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 2500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.

Features:
  • SUPPORTED OEM FUNCTIONALITY:
    • Idle Control (BAC)
    • Thermofan
    • Tachometer
    • A/C Request And Control
    • Engine Control Relay
    • Injector MFD
    • Fuel Pump
    • Power Steering Switch
    • Knock Sensors 1 & 2
    • Wastegate Control
    • AFM Front & Rear
    • Coolant Temperature Sensor
    • Air Temperature Sensor
    • O2 Sensor Front & Rear
    • Check Engine Light
    • Throttle Position Sensor
    • Ignition Input
    • Vehicle Speed Sensor
    • Nissan Variable Cam System (RB25DET only)
    • Variable High And Low RPM/Load Fuel Pump Voltage Control
    • ATTESA AWD (TPS Output)
  • ECU FUNCTIONS
    • Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs & (4) user defined inputs
    • Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
    • Flex Fuel Function (Direct sensor input) - Tune your engines boost, fuel and ignition by ethanol content
    • Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel type
    • Closed Loop 02 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
    • Dual Channel Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection
    • Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam
    • Closed Loop Idle Speed Control with learning for consistent idle stability Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
    • Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D)
    • On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory
    • Laptop data logging -Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics
    • Dual CAN Bus communication for Haltech Dashes and expansion devices, Supported OEM CAN & OBDII (view live engine data & set and clear diagnostic trouble codes)
    • Injection Stages: up to 4 with individual injector flow rates per injector
    • 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines
    • Anti-Lag/Rotational idle - for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
    • Rolling Anti-Lag - lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
    • Launch Control - Control your engines power delivery, RPM & boost for consistent performance at the start line
    • Traction Control - Control your engines power output via mappable front vs rear axle or individual wheel speed slip.
  • ADVANCED TUNING
    • Tuning Table Resolution up to 32 x 32 x 8
    • Limitless tuning flexibility -Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
    • tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility - Dual mapping is a thing of the past.
    • Per Cylinder Tuning Correction - 3D
    • Wideband O2 - Connect up to 9 Channels via CAN expansion devices
    • Thermocouples/EGT (Exhaust Gas Temperature) - Connect up to 12 Channels via external CAN expansion devices
    • Engine Protection - Set advanced multi-level limits for sensors and protect your engine against common causes of failure
  • RACE FUNCTIONS
    • Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays & banked control options.
    • fuel and ignition corrections for all stages.
    • Boost Control -Intelligent 4D Closed loop, with learning, flexible user definable axis and 14 fully user definable boost target and duty cycle corrections.
    • modes - example boost by gear, road speed, race timer, shock travel, ride height etc.
    • Sequential turbo control
    • CO2 Boost control, wastegate pressure & position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer
    • Flat shift - Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
    • Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery
    • Timer Functions - Use the combination of the race timer and 5 additional programmable timers for time based control of multiple engine parameters, power delivery and other user definable functions
    • Trans brake function allows smooth and consistent control of start line staging (Bump or Creep)
    • Optional Upgrade - Advanced Torque Management - A fully integrated driveshaft RPM target race function that provides the ultimate control and consistency for the serious drag racer,
    • eliminating the need for costly external controllers
Installation Guide:NOTE:
  • Manual transmission only.
Inclusions:
  • Elite 2500 ECU with DBW and Race Functions. Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin TYCO plug and pins, USB programming cable and USB software key.
Fitment:
  • NISSAN SKYLINE R32 GTS-T
  • NISSAN SKYLINE R32 GT-R
  • NISSAN SKYLINE R33 GTS-T
  • NISSAN SKYLINE R33 GT-R
  • NISSAN SKYLINE R34 GT-R

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1989-1994
Nissan Skyline R32

1995-1998
Nissan Skyline R33

1999-2002
Nissan Skyline R34

Who Is Haltech?

Haltech has been at the forefront of engine management technology since its inception in 1986. For the last 30-plus years, the company has been globally recognized as a leader in its field, renowned for its cutting-edge technology and customer support. To uphold its reputation, Haltech continues to adapt and stay up to date with new emerging technologies and changing expectations from car enthusiasts, racers, and tuners alike. The company currently has two main offices, one in New South Wales, Australia, and the other in Lexington, Kentucky, U.S. 

With an ever-evolving industry like the automotive one, some things still remain a constant. That includes Haltech’s unwavering commitment to quality and innovation, as well as the passion and dedication of the Haltech team to deliver products that are second to none. These qualities have been the company’s trademark from the very beginning and are the main reason why thousands of consumers all around the globe trust Haltech for their engines. 

What Does Haltech Do?

Haltech designs and manufactures a wide range of automotive performance electronics; it is best known for its engine management systems. Its engine management systems are engineered to control throttle bodies, staged fuel injection systems, distributors, direct injection systems, and engines of all types, including turbocharged, supercharged, and naturally aspirated. The brand offers a comprehensive lineup of ECU and standalone engine management products like CDI ignition systems, sensors, tuning tools, engine harness kits, engine control units, and more! 

Today, Haltech ECUs are sold in more than 50 different countries around the world. Haltech ECUs allow you to make the most of your car’s existing engine. These units are specifically designed to control various aspects of modern engines, including the engine load, air intake, and RPMs. These readings help the ECU regulate the fuel supply and spark plug timing to ensure your engine is running to optimal power and fuel efficiency. Haltech ECUs have been proven over and over again, and are the driving force behind many record-setting racecars. In fact, Haltech is credited as being the first in the world to develop real-time engine management calibration.

Part of the Car Community

The company’s active YouTube channel aims to help customers get the most out of Haltech’s products via DIY projects, fitment instructions, setup tutorials, product reviews, and entertainment segments. In addition, Haltech is also actively involved with many popular car culture shows like Discovery Channel’s Street Outlaws and Mighty Car Mods. It also participates in numerous racing and motorsport events such as NMCA/NMRA, SEMA, PRI, World Cup Finals, Summernats, and the World Time Attack Challenge.

Purchase Haltech Parts at Vivid Racing

Vivid Racing carries a wide range of Haltech products to unleash your engine’s full potential. Our inventory includes dash displays, tuning box kits, interior mounts, ECU flashes, universal fuel injectors, standalone ECUs, and numerous tuning accessories. If you have any questions regarding the parts above or have fitment concerns, please contact our specialized sales team at (480) 966-3040. We are here to make the purchase process a pleasant and seamless experience for all of our customers. We look forward to helping you take your car’s engine to the next level and enjoy newfound power gains.

Unless specified otherwise, Haltech warrants its products to be free from defects in material or workmanship for a period of 12 months from the date of purchase.

If the Haltech product is found to be defective as mentioned above, it will be replaced or repaired if returned prepaid along with proof of purchase. Proof of purchase in the form of a copy of the original purchase invoice, receipt or bill of sale which indicates that the product is within the warranty period, must be presented to obtain warranty service.

Replacement or repair of a defective product shall constitute the sole liability of Haltech. To the extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representations, either expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Haltech, be liable for special or consequential damages.

Check out these other great products