Introducing the Holley HydraMat® – a game changer when it comes to fuel pick-ups in both stock fuel tanks and racing fuel cells. This innovative design addresses the common issues faced during hard cornering, acceleration, sudden stops, inclines, and low fuel situations. In these scenarios, fuel tends to run away from the pick-up, leading to air entering the system, which can cause poor engine performance or even stalling. But with the HydraMat, you can say goodbye to those worries!

What makes the HydraMat truly remarkable are its surface tension and fluid wicking capabilities. These features empower it to draw fuel from almost any area that comes into contact with it, storing it in an internal reservoir. When part of the HydraMat is uncovered, the tiny pores in the material seal off due to surface tension, ensuring that fuel remains contained in the reservoir and is drawn from other areas where fuel is still available. With its impressive size and coverage, the HydraMat can pull fuel from virtually any section of your tank or cell, eliminating the need for specialized reservoirs and pick-up pumps. This not only saves you money but also simplifies the entire setup.

The HydraMat comes in a variety of sizes and shapes, making it compatible with a wide range of stock fuel tanks and racing fuel cells.

• Brochure for Part# 16-106
• Instructions for Part# 16-106
• HydraMat Selector Guide for Part# 16-106

• Patent pending design that addresses the challenges of traditional fuel pick-ups in both stock tanks and racing cells.
• Significantly reduces the chances of air entering the fuel system, which can lead to engine performance issues or stalling.
• Ideal for vehicles that experience fuel starvation during aggressive driving maneuvers.
• Surface tension and fluid wicking allow the HydraMat to continue drawing fuel even when part of it is uncovered.
• When an area of the HydraMat is exposed, tiny pores seal off, forcing fuel to be drawn from other areas where it's still available.
• The unique internal reservoir helps keep fuel accessible at the pick-up, even under extreme slosh conditions.
• Eliminates the need for specialized reservoirs, sumps, and pick-up pumps, simplifying your setup and saving costs.
• Acts as a 15-micron pre-filter, removing the need for a separate filter before the fuel pump.
• Can be easily folded and compressed for installation through various fuel cell openings.
• Available in different sizes and shapes to fit a range of stock tanks and race fuel cells.
• Compatible with Alcohol, Ethanol, Methanol, and E-85 fuels.
• Works with 2-cycle oil blends up to 20:1.
• Not suitable for most oils (see previous point for exceptions).
• Not intended for use with diesel fuels.

• Emission Code: 5
• Fitting Size: 1/2" NPT
• Length: 11 inches
• Micron: 15
• Outlet: Center
• Product Type: HydraMats
• Warranty: Limited 90 Day
• Width: 11 inches

• Designed to fit flat-bottom rectangular fuel cells with minimum dimensions of 11" long and 11" wide.
• For optimal performance, the return fuel should be discharged near the HydraMat pick-up, at least 1 inch above the mat.
• HydraMats with a female NPT thread do not require sealing paste or tape. Using these could lead to fuel pump issues.