Penn-Grade 1 10W-30 Motor Oil Specially formulated to meet the stringent lubricating demands of high-performance, highly stressed, street and racing engines. They reduce internal friction allowing for increased horsepower output while maintaining their strong lubricating film protection even under the most demanding torque and extreme temperature conditions.
Warranty: Howards Cams Hydraulic/Mechanical Flat Tappet Camshafts are 100% Rockwell checked and parkerized at our manufacturing plantin Wisconsin. Howards Cams hydraulic and mechanical lifters are also 100% Rockwell checked for hardness to ensure that our customers receive the best American made components available. To give our customers a performance edge, Howards Cams will unconditionally replace to the original purchaser only, any non-usable hydraulic or mechanical flat tappet camshafts and lifters for 1/2 the amount of the original invoiced purchase price for a period of 6 months from the date of original retail purchase. Howards™ Cams does not warrant the performance of our products due to Howards™ Cams lack of control during product installation and usage. This applies to all camshafts, valve train components and all other racing components in our catalog and product line. Note: Due to oil available today, all Flat Tappet Cams (hydraulic or mechanical) must be initially ran with a quality break-in lube, such as Howards Z.P.M. Max. There is absolutely no warranty, expressed or implied or otherwise, on Howards Cams parts, labor, installation charges or other damaged parts. Howards Cams assumes no responsibility or liability whatsoever on incidental or consequential damages. There are no implied warranties of merchantability or fitness for a particular purpose. Howards Cams neither assumes nor authorizes any person to assume for it, any other obligation or liability in connection with the sale or use of our products. Howards Cams will replace or refund any part that has a manufacturers defect found before installation or alteration. Customers are responsible for blueprinting engine components before installation or startup.