Your All-in-One Performance Kit

Are you on the hunt for a kit that truly has it all? Look no further! This incredible performance kit features a mandrel bent 4 1/2 inch intake tube designed to maximize airflow, ensuring your engine breathes easier. Plus, with HSP's signature heat shield box, you can say goodbye to unwanted hot air sneaking into your cold air intake. Did you know that just a 1-degree increase in intake air temperature can lead to a 3hp loss? With this kit, you can keep those temperatures in check!

High Flow Turbo Mouthpiece

One standout feature is HSP's high flow turbo mouthpiece. This handy addition allows you to reroute your factory PCV system and remove the factory resonator box, which helps prevent engine oil from gumming up your turbo and intake system. (Just a heads-up, the PCV re-route is sold separately—check out part number 003-1-HSP.)

Quality Components for Easy Installation

Included in the kit are our 3-inch mandrel bent hot side and cold side tubes, along with an easy-to-install two-piece Y-bridge. We’ve made sure to use race-proven 5-layer silicone boots, providing a snug fit that you can count on. The factory hot side intercooler tube is only 2.25 inches in diameter and has a 90-degree boot at the intercooler that’s known to fail. Our design routes the hot side tube directly into the intercooler, which means lower temperatures, better airflow, and more clearance in tight spots.

Durable Up Pipes and Stylish Additions

To help get those exhaust gases out of the engine, we’ve included our factory replacement 2-inch up pipes. These up pipes feature .120 inch wall tubing and the toughest bellows on the market, ensuring they stand the test of time alongside your truck. Plus, we’ve thought about styling too! Our forward-facing thermostat housing with a coolant return will help keep your VGT turbo cool. And if your factory coolant tank is starting to look a bit worn, don’t worry—we’ve included a factory replacement coolant tank made from all-aluminum with an integrated low coolant sensor to keep your engine bay looking sharp.

Included Components

• 3x 3 inch x 4 inch Straight boot
• 7x 3 inch T-bolt Clamp
• 1x 2.25 inch - 3 inch Reducer boot
• 1x 2.25 inch T-bolt clamp
• 2x 5/8 inch Worm gear clamp
• 1x 1/8 inch NPT Brass plug
• 1x Bridge Neck O-ring
• 2x Bridge neck stud
• 2x Bridge neck 12-point nut
• 2x M4x.7x10mm bolt
• 3x 10-32 x 3/8 inch Button head screw
• 4x 1/8 inch Aluminum Rivet
• 1x 4 inch - 4.5 inch Reducer boot
• 1x 4 inch T-bolt clamp
• 1x 4.5 inch T-bolt clamp
• 1x 4.5 inch filter
• 1x Turbo inlet o-ring
• 1x radiator cap
• 5x 1/2 inch worm gear clamp
• 1x 1 inch worm gear clamp
• 1x 1/2 inch NPT float switch
• 1x Low coolant sensor
• 1x Thermostat housing o-ring
• 4x M8x1.25-25mm Socket cap bolt
• 4x M6x1.0-18mm Socket Cap bolt
• 1x M14x1.5 to 3/8 inch hose barb
• 1x M14x1.5 Metric Port plug
• 1x Metric Bonding seal 14mm
• 1x 1.75 inch x 3 inch Straight boot
• 1x 1.75 inch 90 degree Boot
• 4x 1 3/4 inch worm gear clamp
• 2x up-pipe gasket (turbo side)
• 2x up-pipe gasket (manifold side)

Compatibility

This kit is compatible with:

• LMM: 07.5-10 VIN Code 6

Wondering how to find your VIN code? The engine code is determined by the 8th character of your VIN number, while the 10th character indicates the year of your truck.