See more parts for Ford Fusion
Select the year of your Ford Fusion:
Product thumb
Injen SP Cold Air Intake System for 2010-2012 Ford Fusion V6 3.5L - 6061-T6 Aluminum
$356.26
Free Shipping Hurry Low Stock

Injen SP9061P Cold Air Intake System

The Injen SP9061P Cold Air Intake System is engineered specifically for the 2010-2012 Ford Fusion V6-3.5L, delivering significant performance enhancements through advanced design and technology. This intake system is a prime example of Injen’s commitment to innovation, featuring patented technologies that ensure optimal airflow and power gains.

Technical Specifications

  • Material: 6061-T6 aluminum for durability and lightweight performance
  • Design: Cold air intake configuration that enhances airflow efficiency
  • Power Gains: Dyno proven increases of up to 13 horsepower and 11 lb-ft of torque
  • Filter: Fully serviceable Injen SuperNano-Web dry air filter, designed for maximum airflow and filtration
  • Finish Options: Available in multiple finishes to match your engine bay aesthetics
  • Sound: Produces an aggressive engine tone under full throttle for an engaging driving experience
  • Installation: Direct fit with no additional tuning required for optimal performance
  • Warranty: Backed by Injen Technology's Limited Lifetime Warranty
  • Regulatory Compliance: Not CARB exempt; not available for purchase in California or for vehicles registered with the California DMV

Performance Features

Equipped with Injen's patented MegaRam (MR) Technology and Air Fusion Technology, the SP9061P ensures that your engine receives a consistent and safe air-fuel ratio across the power band. This meticulous engineering not only boosts horsepower but also maintains engine safety, giving you peace of mind while you enjoy the added power.

Additional Components

The intake system includes a replacement air filter (part number x-1015-BB) and offers optional hydroshield protection (part numbers 1034BLK or 1034RED) to enhance filter longevity and performance in various driving conditions.

Conclusion

For those looking to enhance their 2010-2012 Ford Fusion V6-3.5L, the Injen SP9061P Cold Air Intake System offers a robust solution that combines performance, style, and reliability. Experience the difference in airflow and power with a system designed for serious automotive enthusiasts.

Other Part Numbers:
Injen #injSP9061P

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Ford Fusion 2010-2012 SE
Ford Fusion 2010-2012 Sport
Ford Fusion 2010-2012 Hybrid
Ford Fusion 2010-2012 S
Ford Fusion 2010-2012 SEL
Who is Injen?

Injen is highly recognized in the automotive industry. The company started in 1991 and specializes in manufacturing high-quality air induction products.  The company has become the go-to brand by multiple import tuners and has since become an automotive icon in the industry.

Years of Experience

For more than three decades, the company has created dozens of patents and thousands of new products. All of their products are dyno-tested to ensure that it provides optimum performance to the vehicle it is applied to.

Injen offers a variety of products ranging from intake systems, intercoolers, exhaust systems, and other performance parts. All their products are made out of high-quality materials and are designed by the industry’s top designers and engineers. This enables them to create products that are not only functional but adds an aesthetic value to the vehicle. Even up to now, the company never stops in improving its product. Hence, they are a favorite of tuners who wanted to have the best.

Purchase Injen Products at Vivid Racing

If you are looking for products that provide performance gains and are tried and tested, then Injen is the brand for you. They have been used by thousands of enthusiasts worldwide and have provided them high-performance products they truly deserve. The company has one of the most comprehensive lists of products that applies to most vehicles available in the market. You can never go wrong with Injen.

Visit Vivid Racing and check out their list of products that would fit your specific needs.

Injen Banner

INTAKE WARRANTY

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology.s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

EXHAUST WARRANTY

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. Injen Technology will replace at no charge, any exhaust system considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

AIR INTAKES AND ACCESSORIES

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.

SES INTERCOOLERS AND EXHAUST SYSTEMS

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Defective parts will be replaced or repaired as deemed necessary by Injen Technology. All other warranty issues will apply as indicated under the Air Intake section. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.

Check out these other great products