See more parts for Scion xA
Select the year of your Scion xA:
Product thumb
Injen IS Short Ram Air Intake System for 2004-2006 Scion xA/xB L4-1.5L, Polished Finish
$366.96
Free Shipping Hurry Low Stock

Injen IS2105P Short Ram Air Intake System

The Injen IS2105P Short Ram Air Intake System is engineered specifically for the 2004-2006 Scion xA and xB models equipped with the L4-1.5L engine. This intake system is designed to enhance your vehicle's performance by optimizing airflow and increasing horsepower.

Performance and Design

This intake system features a T6-6061 mandrel-bent aluminum intake tube, which ensures a smooth and uninterrupted airflow path. This design minimizes restrictions, allowing for improved engine efficiency and a noticeable increase in power. Dyno testing has shown gains of up to 6 horsepower and 5 lb-ft of torque, all while maintaining safe air-fuel ratios without the need for additional tuning.

Filter and Maintenance

The Injen IS2105P comes equipped with a fully serviceable Injen SuperNano-Web dry air filter. This filter is designed to provide an increased surface area for airflow while ensuring superior filtration. For those looking to enhance protection against moisture, optional hydroshields (part numbers 1033BLK or 1033RED) are available.

Finish Options and Sound

Available in a polished finish or a powder-coated laser black, the IS2105P allows for customization to match your engine bay aesthetics. Under full throttle, this intake system produces an aggressive engine tone that complements its performance enhancements.

Installation and Warranty

Installation is straightforward, with a direct fit for the specified Scion models. Each kit includes all necessary hardware for a hassle-free setup. Injen backs this product with a limited lifetime warranty, ensuring peace of mind with your purchase.

Specifications

  • Direct fit for 2004-2006 Scion xA/xB L4-1.5L
  • Dyno proven gains of up to 6 hp and 5 lb-ft of torque
  • Maintains A/F ratios with no additional tuning required
  • T6-6061 mandrel-bent aluminum intake tubing
  • Fully serviceable Injen SuperNano-Web dry air filter
  • Replacement air filter part number: x-1012-BB
  • Optional hydroshield part numbers: 1033BLK or 1033RED
  • Available finishes: polished or laser black powder coated
  • Aggressive engine tone under full throttle
  • Made in Pomona, California, USA
  • CARB EO #: D-476-4 (CARB exempt for 2004 model year only)

Other Part Numbers:
Injen #injIS2105P

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Scion xA 2004-2006 Base
Scion xB 2004-2006 Base
Who is Injen?

Injen is highly recognized in the automotive industry. The company started in 1991 and specializes in manufacturing high-quality air induction products.  The company has become the go-to brand by multiple import tuners and has since become an automotive icon in the industry.

Years of Experience

For more than three decades, the company has created dozens of patents and thousands of new products. All of their products are dyno-tested to ensure that it provides optimum performance to the vehicle it is applied to.

Injen offers a variety of products ranging from intake systems, intercoolers, exhaust systems, and other performance parts. All their products are made out of high-quality materials and are designed by the industry’s top designers and engineers. This enables them to create products that are not only functional but adds an aesthetic value to the vehicle. Even up to now, the company never stops in improving its product. Hence, they are a favorite of tuners who wanted to have the best.

Purchase Injen Products at Vivid Racing

If you are looking for products that provide performance gains and are tried and tested, then Injen is the brand for you. They have been used by thousands of enthusiasts worldwide and have provided them high-performance products they truly deserve. The company has one of the most comprehensive lists of products that applies to most vehicles available in the market. You can never go wrong with Injen.

Visit Vivid Racing and check out their list of products that would fit your specific needs.

Injen Banner

INTAKE WARRANTY

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology.s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

EXHAUST WARRANTY

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. Injen Technology will replace at no charge, any exhaust system considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

AIR INTAKES AND ACCESSORIES

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.

SES INTERCOOLERS AND EXHAUST SYSTEMS

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Defective parts will be replaced or repaired as deemed necessary by Injen Technology. All other warranty issues will apply as indicated under the Air Intake section. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.

Check out these other great products