See more parts for Audi A3
Select the year of your Audi A3:
Product thumb
Injen SP3089P Short Ram Intake System Polished for 2017-2020 Audi A3 L4-2.0T FWD
$427.95
Free Shipping

Injen SP3089P Short Ram Intake System for Audi A3 (2017-2020)

The Injen SP3089P Short Ram Intake System is engineered specifically for the 2017-2020 Audi A3 equipped with the L4-2.0(t) FWD engine. This intake system is designed to enhance engine performance by improving airflow and optimizing power delivery without the need for additional tuning.

Key Features

  • Direct fit for 2017-2020 Audi A3 L4-2.0(t) FWD only
  • Compatible with vehicles equipped with MAF sensor; factory MAF housing is reused
  • Dyno-proven gains of up to 10 horsepower and 11 lb-ft of torque
  • Constructed from high-quality 6061-T6 aluminum for durability and performance
  • Includes a custom heat shield designed for optimal heat management
  • Features a fully serviceable Injen SuperNano-Web dry air filter for enhanced airflow and filtration
  • Available in multiple finishes: Polished (SP3089P), Wrinkle Black (SP3089WB), and Wrinkle Red (SP3089WR)
  • Produces an aggressive engine tone under full throttle
  • Manufactured in Pomona, California, USA
  • Includes Injen Technology Limited Lifetime Warranty
  • This product is not CARB exempt and cannot be purchased for use in California or on vehicles registered with the California DMV

Installation Notes

  • Designed exclusively for FWD models; excludes Quattro variants
  • Installation does not require any additional tuning

The SP3089P intake system offers a significant upgrade over the restrictive factory intake tract, allowing your turbocharged engine to breathe more freely and deliver the performance you expect from an Audi. With its sleek design and quality construction, this intake not only enhances horsepower but also adds a distinctive sound that enhances the driving experience. The Injen SP3089P is a practical choice for those looking to maximize their Audi A3's potential.

Other Part Numbers:
Injen #injSP3089P

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Audi A3 2017-2020 Premium Plus
Audi A3 2017-2020 Progressiv
Audi A3 2017-2019 Prestige
Audi A3 2017-2020 Komfort
Audi A3 2017-2020 Dynamic
Audi A3 2017 Elite
Audi A3 2017-2020 Select
Audi A3 2017-2020 S Line
Audi A3 2017, 2019-2020 Technik
Audi A3 2017-2020 Premium
Audi A3 2018 Attraction
Audi A3 2019 Titanium
Who is Injen?

Injen is highly recognized in the automotive industry. The company started in 1991 and specializes in manufacturing high-quality air induction products.  The company has become the go-to brand by multiple import tuners and has since become an automotive icon in the industry.

Years of Experience

For more than three decades, the company has created dozens of patents and thousands of new products. All of their products are dyno-tested to ensure that it provides optimum performance to the vehicle it is applied to.

Injen offers a variety of products ranging from intake systems, intercoolers, exhaust systems, and other performance parts. All their products are made out of high-quality materials and are designed by the industry’s top designers and engineers. This enables them to create products that are not only functional but adds an aesthetic value to the vehicle. Even up to now, the company never stops in improving its product. Hence, they are a favorite of tuners who wanted to have the best.

Purchase Injen Products at Vivid Racing

If you are looking for products that provide performance gains and are tried and tested, then Injen is the brand for you. They have been used by thousands of enthusiasts worldwide and have provided them high-performance products they truly deserve. The company has one of the most comprehensive lists of products that applies to most vehicles available in the market. You can never go wrong with Injen.

Visit Vivid Racing and check out their list of products that would fit your specific needs.

Injen Banner

INTAKE WARRANTY

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology.s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

EXHAUST WARRANTY

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. Injen Technology will replace at no charge, any exhaust system considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

AIR INTAKES AND ACCESSORIES

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.

SES INTERCOOLERS AND EXHAUST SYSTEMS

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Defective parts will be replaced or repaired as deemed necessary by Injen Technology. All other warranty issues will apply as indicated under the Air Intake section. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.

Check out these other great products