See more parts for Ford Focus
Select the year of your Ford Focus:
Product thumb
Injen Wrinkle Red Intercooler Pipe Kit for Ford Focus ST 2013-2018, 2.50" Aluminum
$422.6
Free Shipping

Injen SES9002ICPWR Intercooler Pipe Kit

The Injen SES9002ICPWR Intercooler Pipe Kit is engineered to enhance the performance of your Ford Focus ST (2013-2018) by optimizing airflow and reducing turbo lag. This kit is meticulously designed to replace the factory piping, addressing key areas for improvement identified through extensive research and development.

Construction and Materials

Manufactured from 2.50-inch lightweight 6061-T1 aluminum, the SES9002ICPWR features mandrel-bent tubing that ensures smooth transitions and increased flow. This design minimizes restrictions, resulting in lower exhaust gas temperatures (EGTs) and improved power output. The beaded tube ends provide secure connections, enhancing fitment and reliability.

High-Quality Components

  • Includes both hot and cold side pipes for complete coverage.
  • Utilizes automotive-grade silicone couplers that resist heat, pressure, fuel, and oil, significantly extending their lifespan and preventing leaks.
  • Equipped with stainless steel band clamps featuring an inner protective liner to ensure a secure and durable installation.
  • All factory mounting locations are used, allowing for a straightforward installation with minimal modifications.
  • Comes with all necessary hardware for a hassle-free setup.

Performance Benefits

By replacing your stock intercooler piping with the Injen SES9002ICPWR, you can expect enhanced throttle response and a noticeable decrease in turbo lag. The increased airflow not only contributes to better engine performance but also aids in maintaining optimal operating temperatures.

Warranty and Compliance

This intercooler pipe kit is backed by the Injen Technology Limited Lifetime Warranty, ensuring peace of mind with your purchase. However, it is important to note that this product is not currently CARB exempt and cannot be purchased or used in California or on vehicles registered with the California Department of Motor Vehicles.

Fitment

  • Ford Focus ST 2013-2018

Prop 65 Compliance

  • This product can expose you to chemicals including Chromium, Nickel, Carbon Black, Bisphenol A/Epichlorohydrin Polymer & Cobalt, which are known to the State of California to cause cancer, and (Antimony [Oxide], Arsenic, Beryllium, Chromium (hexavalent), Cobalt Cadmium, Lead, and Nickel which is known to the State of California to cause birth defects or other reproductive harm.

Documentation

Other Part Numbers:
Injen #injSES9002ICPWR

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Ford Focus 2013-2014 SE Plus
Ford Focus 2013-2015 Titanium Plus
Ford Focus 2013-2018 ST
Ford Focus 2013-2018 Titanium
Ford Focus 2013-2018 S
Ford Focus 2013-2018 SE
Ford Focus 2013-2018 Electric
Ford Focus 2014 Trend Sport
Ford Focus 2014 Trend
Ford Focus 2014 Ambiente
Ford Focus 2015 SE Appearance
Ford Focus 2016 SE Luxury
Ford Focus 2017-2018 SEL
Who is Injen?

Injen is highly recognized in the automotive industry. The company started in 1991 and specializes in manufacturing high-quality air induction products.  The company has become the go-to brand by multiple import tuners and has since become an automotive icon in the industry.

Years of Experience

For more than three decades, the company has created dozens of patents and thousands of new products. All of their products are dyno-tested to ensure that it provides optimum performance to the vehicle it is applied to.

Injen offers a variety of products ranging from intake systems, intercoolers, exhaust systems, and other performance parts. All their products are made out of high-quality materials and are designed by the industry’s top designers and engineers. This enables them to create products that are not only functional but adds an aesthetic value to the vehicle. Even up to now, the company never stops in improving its product. Hence, they are a favorite of tuners who wanted to have the best.

Purchase Injen Products at Vivid Racing

If you are looking for products that provide performance gains and are tried and tested, then Injen is the brand for you. They have been used by thousands of enthusiasts worldwide and have provided them high-performance products they truly deserve. The company has one of the most comprehensive lists of products that applies to most vehicles available in the market. You can never go wrong with Injen.

Visit Vivid Racing and check out their list of products that would fit your specific needs.

Injen Banner

INTAKE WARRANTY

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology.s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

EXHAUST WARRANTY

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. Injen Technology will replace at no charge, any exhaust system considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement.

AIR INTAKES AND ACCESSORIES

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems excluding the filter element. Injen Technology will replace at no charge, any intake pipe considered by Injen Technology to be defective. The warranty is void if the warranty card is not returned to Injen Technology within the first 30 days of purchase. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology's discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.

SES INTERCOOLERS AND EXHAUST SYSTEMS

Injen Technology offers a one-year warranty to the original purchaser against defects in material and workmanship on all exhaust systems. SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Defective parts will be replaced or repaired as deemed necessary by Injen Technology. All other warranty issues will apply as indicated under the Air Intake section. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.

Check out these other great products