If you're looking to tighten up the handling on your Jeep Wrangler TJ or LJ, swapping out the stock rear track bar for this adjustable one is a solid move. This isn't just any track bar; it's built to handle the demands of off-roading while keeping your axle aligned and stable. With a heavy-duty construction, you can tweak it to fit your specific suspension setup and ride height. We're talking about precision 1-1/4" fine threads that let you dial in your axle positioning just right.

The track bar is made from 1.25" diameter DOM tubing with a robust 0.25" wall thickness. It's CNC-bent to maintain the right geometry and clearance, so you won't have to worry about it getting in the way when you're out tackling tough trails. Plus, the powder-coated and zinc finish adds a layer of protection against rust and debris, which is crucial when you're putting your Jeep through its paces.

One of the standout features here is the spherical urethane bushing on one end, which allows for unrestricted travel. This means you'll get a smoother ride and better articulation when you're on uneven ground. On the other end, there's a high-performance urethane bushing that enhances steering responsiveness, making it feel more connected to the road???or trail, in this case.

Features & Benefits:

• Replaces the original fixed-length panhard rod with superior quality.
• Variable length design helps align the axle housing with the chassis, preventing stress on other components.
• Fine adjustment threads for ultra precise axle positioning.
• Extremely strong DOM tube construction ensures correct geometry and clearance.
• Spherical urethane bushing for unrestricted travel, plus high-performance urethane for improved steering.
• Zinc plated and powder coated to fend off corrosion and debris.

Specifications:

• Bushings Included: No
• Lift Height: 0-6.5"
• Material: Steel

Installation:

• For Instructions Click Here
• Estimated Install Time: 2-3 hours
• Difficulty Level: Moderate
• Tools Needed: 1-1/2" Open-End Wrench, Anti-Seize Lubricant, Heavy Duty Ratchet Strap, Hydraulic Floor Jack and Jack Stands, Metric/Standard Socket Wrench Set, T55 Torx Driver (for OE track bar bolt), Tape Measure, Torque Wrench, Wheel Bearing Grease

Fitments:

• Jeep Wrangler 1997-2006

Notes:

• Suggested Starting Length: 32.75in
• Min. Adjusted Length: 31.3in
• Max Adjusted Length: 34.3in
• Requires 0 to 6.0 in. suspension lift.
• For vehicles equipped with CV-type driveshaft order.
• Not compatible with right-hand drive vehicles.

This adjustable rear track bar is a game-changer for anyone looking to enhance their Jeep's performance. Trust me, once you make this upgrade, you'll feel the difference on your next adventure.