See more parts for Mazda 3
Select the year of your Mazda 3:
Product thumb
MagnaFlow 5671145 Direct-Fit Catalytic Converter for 2004-2013 Mazda 3, Stainless Steel
$588.00

MagnaFlow Direct-Fit Catalytic Converter 5671145

If you're looking to keep your 2004-2013 Mazda 3 running clean and efficiently, the MagnaFlow Direct-Fit Catalytic Converter 5671145 is your go-to solution. This high-performance catalytic converter is designed to maintain optimal exhaust flow while ensuring your check engine light stays off. With its robust features, you can install it at home without the need for cutting or welding, making it a straightforward upgrade for any DIY enthusiast.

Why Choose MagnaFlow 5671145?

Crafted from highly corrosion-resistant stainless steel, this catalytic converter features free-flowing mandrel-bent tubing that enhances exhaust efficiency. MagnaFlow employs cutting-edge 3D scanning technology during the design phase, ensuring that this direct-fit part integrates seamlessly with your vehicle's existing setup. The spun body design, combined with a single laser fusion weld, minimizes the chance of leaks while promoting greater thermal efficiency.

Key Features

  • California/CARB Compliant: This catalytic converter meets stringent emissions standards set by the California Air Resources Board (CARB), making it legal for use in California and other CARB-regulated states.
  • Direct-Fit Installation: Thanks to advanced 3D scanning, this part is designed for a perfect fit, allowing for an easy DIY installation with all necessary hardware included.
  • Durable Spun Body Design: Constructed from stainless steel with mandrel bent piping, this converter features OEM-like O2 port locations and integrated butt joints, ensuring optimal performance and longevity.
  • Specifications: Designed specifically for the Mazda 3, the 5671145 model ensures you avoid potential exhaust leaks by utilizing the included gaskets for a proper seal.

Technical Specifications

  • Series: California
  • Body Length: 9 inches
  • Body Width: 4 inches
  • Overall Length: 19 inches
  • Inlet Diameter: 2.5 inches (Bolt-On)
  • Outlet Diameter: 2.25 inches (Clamp-On)
  • Body Material: Stainless Steel
  • Substrate Material: Ceramic
  • Universal or Specific Fit: Specific

Fitment

  • Mazda 3 i L4 2.0L (2004-2013)
  • Mazda 3 I Touring L4 2.0L (2010-2013)
  • Mazda 3 GX L4 2.0L (2004-2006)
  • Mazda 3 GX L4 2.0L (2008-2013)
  • Mazda 3 GS-Sky L4 2.0L (2012-2013)
  • Mazda 3 GS L4 2.0L (2004-2006)
  • Mazda 3 GS L4 2.0L (2008-2012)
  • Mazda 3 Sport GX L4 2.0L (2011)

Customer Feedback

One Mazda 3 owner shared, "I installed the MagnaFlow 5671145 on my 2011 Mazda 3, and it fit perfectly. The installation took me about an hour, and I noticed an immediate improvement in throttle response and exhaust note. Highly recommend for anyone looking to replace their OEM cat!"

Upgrade your Mazda 3's exhaust system with the MagnaFlow 5671145 Catalytic Converter and enjoy enhanced performance while staying compliant with emissions regulations.

Other Part Numbers:
MagnaFlow #mag5671145

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Mazda 3 2004-2013 i
Mazda 3 2004-2013 S
Mazda 3 2004-2006, 2008-2013 GX
Mazda 3 2004-2006, 2008-2013 GT
Mazda 3 2004-2006, 2008-2012 GS
Mazda 3 2005 SP23
Mazda 3 2007-2013 Mazdaspeed
Mazda 3 2010-2013 Grand Touring
Mazda 3 2010-2013 I Touring
Mazda 3 2011 Sport GS
Mazda 3 2011 Sport GT
Mazda 3 2011 Sport GX
Mazda 3 2012-2013 GS-SKY
Discover MagnaFlow: The Leader in Performance Exhaust Systems

When it comes to performance exhaust systems, MagnaFlow stands out as a premier brand known for its commitment to quality, performance, and innovation. Established in 1981, MagnaFlow has built a legacy of crafting exhaust products that enhance the sound and performance of vehicles. With decades of experience in the automotive industry, they have become synonymous with high-performance parts that car enthusiasts trust.

History of MagnaFlow: A Legacy of Excellence

MagnaFlow began its journey in a small garage, driven by a passion for performance and a desire to create superior exhaust systems. Over the years, they have expanded their product line to include a wide variety of exhaust systems, catalytic converters, and mufflers, catering to both street and off-road vehicles. Their dedication to research and development has allowed them to stay ahead of the curve, continually innovating to meet the demands of modern automotive technology.

Categories of Parts Offered by MagnaFlow

MagnaFlow is renowned for its extensive range of products, including:

  • Performance Exhaust Systems
  • Cat-Back Exhaust Systems
  • Universal Mufflers
  • High-Performance Catalytic Converters
  • Exhaust Tips and Accessories

Each product is designed with precision engineering to improve exhaust flow, enhance horsepower, and provide an aggressive sound that resonates with car enthusiasts. Whether you drive a muscle car, truck, or SUV, MagnaFlow has the perfect solution to elevate your vehicle's performance.

What Makes MagnaFlow the Best Choice?

What sets MagnaFlow apart from other brands is their unwavering commitment to quality and performance. Each exhaust system is constructed using durable materials, ensuring longevity and reliability. Additionally, MagnaFlow exhaust systems are rigorously tested to guarantee superior sound and performance, making them a favorite among racers and everyday drivers alike.

At Vivid Racing, we are proud to offer a wide selection of MagnaFlow products. Upgrade your vehicle today and experience the difference that MagnaFlow can make in your driving experience!

PERFORMANCE EXHAUST PRODUCTS WARRANTY
The manufacturer warrants that all MagnaFlow Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.

This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.

The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.

No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
  • Stainless Steel Systems: Limited Lifetime Warranty against Manufacturing Defects
  • Black Finish Systems: 1 Year Warranty on Black Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Titanium Finish Systems: 1 Year Warranty on Titanium Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Carbon Fiber Systems: Limited Lifetime Warranty against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
  • Aluminized Systems: 1 Year Limited Warranty
  • Stainless Steel Mufflers: Limited Lifetime Warranty against Manufacturing Defects
CATALYTIC CONVERTERS WARRANTIES
Original Warranty Certificate and Installation Statement:
To be completely filled out by installer and returned to manufacturer. Include dealer name, complete address and phone number. Include customer name, complete address and phone number. Vehicle make, year, model, engine size, mileage and date must be filled out. The part number installed must be filled out. The Installation Statement must be completed by installer, stating the reason for replacement. Vehicle owner and installer must sign and date the Warranty Certificate /Installation Statement.

Catalytic Converter Warranty Statement Installer's Copy:
To be retained by Installer with copy of the invoice for six (6) months.

Customer's Copy:
To be retained by the vehicle owner.

Catalytic Converters are emission control devices which are designed to last the life of the vehicle and do not normally require replacement. Furthermore, if the vehicle is properly used and maintained, original converters are covered by the emission control warranty for 8 years or 80,000 miles. Federal law prohibits repair businesses from replacing these devices except under certain limited circumstances. In order to verify that proper circumstances exist, the owner of the vehicle on which such repairs are made and a facility representative must sign the required statements on the warranty card. To avoid failing a warranty audit, please follow the instructions to ensure the new cards are filled out correctly and distributed accordingly.

MOTORCYCLE PRODUCTS WARRANTY
MagnaFlow motorcycle exhaust products, including Arlen Ness by MagnaFlow exhaust systems, are warranted against defects in material and/or assembly workmanship only for a period of 1 year from invoice date. This Warranty is void if the Product is not installed properly on the vehicle for which it is designed. This Warranty does not apply to any Product which has been installed on any commercial or racing vehicle or which has been improperly installed, modified, altered or subjected to misuse or damage from accidents; including excessive heat. Also, cost of labor and any additional parts or components required to complete installation of a replacement Product are not covered by this Warranty; including coatings, paints and/or finishes, flaws or rust. MagnaFlow including Arlen Ness by MagnaFlow exhaust systems are designed to fit and operate on original OEM motors and chassis with no modifications of any type on the motorcycle.

Proof of purchase from an authorized retailer must accompany any warranty claim. The original Product that is deemed to be under warranty may only be returned and/or exchanged for a Product of the same part number. No other warranty, expressed or implied (including merchantability), applies to the Products, nor is any person including the manufacturer authorized to assume any other warranty. Dealers and distributors are not authorized to make warranty judgments or claims regarding MagnaFlow products. The manufacturer does not assume any responsibility for any consequential damages occasioned by the Product, or inconvenience or interruption in any operation, service or shipping. All approved warranty returns must be accompanied by a return authorization number. Parts returned to MagnaFlow without a return authorization and accompanying documentation may be refused. No parts will be accepted with freight due.

This warranty gives you specific legal rights. You may also have other rights which may vary from State to State. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

The warranties set forth herein are exclusive and, unless otherwise required by applicable law, no other warranties are made by MagnaFlow or are authorized to be made with respect to the Product.

Check out these other great products