See more parts for Acura MDX
Select the year of your Acura MDX:
Product thumb
MagnaFlow HM Grade Direct-Fit Catalytic Converter 93642 for Honda Accord/Odyssey 2003-2010, Stainless Steel
$323.00

MagnaFlow HM Grade Direct-Fit Catalytic Converter

Features

  • Sensor Port Count: 0
  • Material: Stainless Steel
  • Overall Length: 10.25 inches
  • Series: HM Grade
  • Mounting Hardware Included: Yes
  • Subtitle: Federal / EPA Compliant
  • Title: HM Grade Direct-Fit
  • Heat Shield Attached: No
  • Hangers Included: No
  • Substrate Material: Ceramic
  • Type: Direct-Fit
  • Converter Quantity: 1
  • Finish: Stainless Steel
  • Gasket Included: Yes
  • Air Tube Adaptable: No
  • Universal Or Specific Fit: Specific
  • Clamp Included: No
  • Main Piping Diameter: 2 inches
  • Outlet Type: Bolt-On
  • Outlet Attachment: Bolt-On
  • Inlet Type: Bolt-On
  • Inlet Attachment: Bolt-On

If you're looking to keep your check engine light off and your ride running smoothly, the MagnaFlow HM Grade Direct-Fit Catalytic Converter 93642 is a solid choice. This bad boy features a free-flowing design with mandrel-bent tubing, so you get optimal exhaust flow without the hassle of cutting or welding—just bolt it on and you're good to go. Made from highly corrosion-resistant stainless steel, this converter is built to last.

What really sets this converter apart is MagnaFlow's commitment to quality. They use advanced 3D scanning technology during development, ensuring that your new part fits and performs just like the original. The single laser fusion weld minimizes the chance of leaks, which is key for maintaining performance and efficiency. Plus, the compact design helps with thermal efficiency, keeping your exhaust system running cooler.

This direct-fit converter is designed for a range of vehicles, including the 2005-2010 Honda Odyssey and the 2003-2007 Honda Accord, among others. It even swaps out with OE parts like 18160-RCA-S00 and 18160-RCA-A00 seamlessly. Don't forget to use the included gaskets to avoid any exhaust leaks—getting that proper seal is crucial.

And yes, this converter meets or exceeds Federal emissions standards set by the EPA, so you're compliant with OBDII regulations for federally registered vehicles. Just a heads up: this product is meant for racing competition only, so it's not street-legal. If you decide to go for it, you'll need to sign a Vehicle Compliance Waiver here.


Products Fitment:

  • Acura MDX 2003-2006
  • Acura TL 2004-2008
  • Honda Accord 2003-2007
  • Honda Odyssey 2005-2010
  • Honda Pilot 2005-2008
  • Honda Ridgeline 2006-2008

Other Part Numbers:
MagnaFlow #mag93642

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Acura MDX 2003-2006 Base
Acura MDX 2003-2006 Touring
Acura TL 2004-2008 Base
Acura TL 2007-2008 Type-S
Honda Accord 2003-2005 DX
Honda Accord 2003-2007 EX
Honda Accord 2003 Coupe
Honda Accord 2003-2007 LX
Honda Accord 2005-2007 Hybrid
Honda Accord 2005 SE
Honda Accord 2006 LX Special Edition
Honda Accord 2006-2007 Value Package
Honda Accord 2007 LX SE
Honda Accord 2007 EX-L
Honda Accord 2007 Special Edition
Honda Odyssey 2005-2010 Touring
Honda Odyssey 2005-2010 EX
Honda Odyssey 2005-2010 EX-L
Honda Odyssey 2005-2010 LX
Honda Odyssey 2008-2010 DX
Honda Odyssey 2010 NHL SE
Honda Pilot 2005-2008 EX
Honda Pilot 2005-2008 LX
Honda Pilot 2005-2008 EX-L
Honda Pilot 2008 Value Package
Honda Pilot 2008 Special Edition
Honda Pilot 2008 SE-L
Honda Ridgeline 2006-2008 RTL
Honda Ridgeline 2006-2008 RTS
Honda Ridgeline 2006-2008 RT
Honda Ridgeline 2007-2008 RTX
Honda Ridgeline 2008 LX
Honda Ridgeline 2008 EX-L
Discover MagnaFlow: The Leader in Performance Exhaust Systems

When it comes to performance exhaust systems, MagnaFlow stands out as a premier brand known for its commitment to quality, performance, and innovation. Established in 1981, MagnaFlow has built a legacy of crafting exhaust products that enhance the sound and performance of vehicles. With decades of experience in the automotive industry, they have become synonymous with high-performance parts that car enthusiasts trust.

History of MagnaFlow: A Legacy of Excellence

MagnaFlow began its journey in a small garage, driven by a passion for performance and a desire to create superior exhaust systems. Over the years, they have expanded their product line to include a wide variety of exhaust systems, catalytic converters, and mufflers, catering to both street and off-road vehicles. Their dedication to research and development has allowed them to stay ahead of the curve, continually innovating to meet the demands of modern automotive technology.

Categories of Parts Offered by MagnaFlow

MagnaFlow is renowned for its extensive range of products, including:

  • Performance Exhaust Systems
  • Cat-Back Exhaust Systems
  • Universal Mufflers
  • High-Performance Catalytic Converters
  • Exhaust Tips and Accessories

Each product is designed with precision engineering to improve exhaust flow, enhance horsepower, and provide an aggressive sound that resonates with car enthusiasts. Whether you drive a muscle car, truck, or SUV, MagnaFlow has the perfect solution to elevate your vehicle's performance.

What Makes MagnaFlow the Best Choice?

What sets MagnaFlow apart from other brands is their unwavering commitment to quality and performance. Each exhaust system is constructed using durable materials, ensuring longevity and reliability. Additionally, MagnaFlow exhaust systems are rigorously tested to guarantee superior sound and performance, making them a favorite among racers and everyday drivers alike.

At Vivid Racing, we are proud to offer a wide selection of MagnaFlow products. Upgrade your vehicle today and experience the difference that MagnaFlow can make in your driving experience!

PERFORMANCE EXHAUST PRODUCTS WARRANTY
The manufacturer warrants that all MagnaFlow Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.

This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.

The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.

No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
  • Stainless Steel Systems: Limited Lifetime Warranty against Manufacturing Defects
  • Black Finish Systems: 1 Year Warranty on Black Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Titanium Finish Systems: 1 Year Warranty on Titanium Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Carbon Fiber Systems: Limited Lifetime Warranty against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
  • Aluminized Systems: 1 Year Limited Warranty
  • Stainless Steel Mufflers: Limited Lifetime Warranty against Manufacturing Defects
CATALYTIC CONVERTERS WARRANTIES
Original Warranty Certificate and Installation Statement:
To be completely filled out by installer and returned to manufacturer. Include dealer name, complete address and phone number. Include customer name, complete address and phone number. Vehicle make, year, model, engine size, mileage and date must be filled out. The part number installed must be filled out. The Installation Statement must be completed by installer, stating the reason for replacement. Vehicle owner and installer must sign and date the Warranty Certificate /Installation Statement.

Catalytic Converter Warranty Statement Installer's Copy:
To be retained by Installer with copy of the invoice for six (6) months.

Customer's Copy:
To be retained by the vehicle owner.

Catalytic Converters are emission control devices which are designed to last the life of the vehicle and do not normally require replacement. Furthermore, if the vehicle is properly used and maintained, original converters are covered by the emission control warranty for 8 years or 80,000 miles. Federal law prohibits repair businesses from replacing these devices except under certain limited circumstances. In order to verify that proper circumstances exist, the owner of the vehicle on which such repairs are made and a facility representative must sign the required statements on the warranty card. To avoid failing a warranty audit, please follow the instructions to ensure the new cards are filled out correctly and distributed accordingly.

MOTORCYCLE PRODUCTS WARRANTY
MagnaFlow motorcycle exhaust products, including Arlen Ness by MagnaFlow exhaust systems, are warranted against defects in material and/or assembly workmanship only for a period of 1 year from invoice date. This Warranty is void if the Product is not installed properly on the vehicle for which it is designed. This Warranty does not apply to any Product which has been installed on any commercial or racing vehicle or which has been improperly installed, modified, altered or subjected to misuse or damage from accidents; including excessive heat. Also, cost of labor and any additional parts or components required to complete installation of a replacement Product are not covered by this Warranty; including coatings, paints and/or finishes, flaws or rust. MagnaFlow including Arlen Ness by MagnaFlow exhaust systems are designed to fit and operate on original OEM motors and chassis with no modifications of any type on the motorcycle.

Proof of purchase from an authorized retailer must accompany any warranty claim. The original Product that is deemed to be under warranty may only be returned and/or exchanged for a Product of the same part number. No other warranty, expressed or implied (including merchantability), applies to the Products, nor is any person including the manufacturer authorized to assume any other warranty. Dealers and distributors are not authorized to make warranty judgments or claims regarding MagnaFlow products. The manufacturer does not assume any responsibility for any consequential damages occasioned by the Product, or inconvenience or interruption in any operation, service or shipping. All approved warranty returns must be accompanied by a return authorization number. Parts returned to MagnaFlow without a return authorization and accompanying documentation may be refused. No parts will be accepted with freight due.

This warranty gives you specific legal rights. You may also have other rights which may vary from State to State. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

The warranties set forth herein are exclusive and, unless otherwise required by applicable law, no other warranties are made by MagnaFlow or are authorized to be made with respect to the Product.

Check out these other great products