Wheel Blowout Sale
BRAKES - AFFIRM
  See more parts for your Audi V8 Quattro

MagnaFlow Exhaust Products Universal Catalytic Converter - 2.25in.

$105.27 SALE: $100.00

MagnaFlow

Model #91005

In Stock


Shopper Award

This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles.

Purchasing this product requires you to sign our Vehicle Compliance Waiver here.

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.

Specifications:

  • All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.
  • Stainless steel construction
  • Federal Emissions compliant design
  • Formulated for Gas and Diesel Applications

Universal Catalytic Converter - 2.25in.

Features

  • Inlet Attachment: Weld-On
  • Inlet Diameter: 2.25
  • Inlet Orientation: Straight
  • Material: Stainless Steel
  • Outlet Attachment: Weld-On
  • Outlet Diameter: 2.25
  • Outlet Orientation: Straight
  • Oxygen Sensor Location: None
  • Series: Standard Grade
  • Subtitle: Federal / EPA Compliant
  • Title: Standard Grade Universal
  • Type: Universal
  • Air Tube Adaptable: No
  • Body Type: Clam Shell
  • Finish: Stainless Steel
  • Heat Shield Material: Aluminized Steel
  • MagnaFlow specializes in superior catalytic converter and exhaust technology and each converter is designed to the exact original equipment specifications while keeping the Check Engine Light off.

Notes:

Fits position: Front Right

Fits position: Left

Fits position: Rear

Fits position: Right

This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles. Purchasing this product requires you to sign our Vehicle Compliance Waiver here.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1992-1994
Audi V8 Quattro

8 Cylinder 4.2 Liter
  • Cutting and Welding Required During Installation
1992-1994
Audi V8 Quattro

8 Cylinder 4.2 Liter
  • Cutting and Welding Required During Installation
1989-1993
Buick Century

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1986-1990
Buick Electra

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1980
Buick Electra

8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1986-1991
Buick LeSabre

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1986
Buick LeSabre

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1980
Buick LeSabre
Base
8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1980
Buick LeSabre
Limited
8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1988-1990
Buick Reatta

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1994-1995
Buick Regal

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1986-1990
Buick Riviera

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1987
Buick Skyhawk

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1989-1993
Buick Skylark

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1988-1991
Buick Skylark

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1985-1989
Chevrolet Camaro

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1981-1982
Chevrolet Caprice

6 Cylinder 3.8 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1981
Chevrolet Caprice

6 Cylinder 3.8 Liter
  • with Straight Outlet Pipe
  • Cutting and Welding Required During Installation
1990
Chevrolet Cavalier

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1987-1989
Chevrolet Cavalier

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1994-1995
Chevrolet LLV

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1987-1993
Chevrolet LLV

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1993-1995
Chevrolet Lumina APV

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1990-1991
Chevrolet Lumina APV

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1985-1993
Chevrolet S10

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1982-1987
Chevrolet S10

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1982-1985
Chevrolet S10

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1983-1984
Chevrolet S10

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1985-1988
Chevrolet S10 Blazer

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1983-1987
Chevrolet S10 Blazer

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1983-1984
Chevrolet S10 Blazer

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1983-1984
Chevrolet S10 Blazer

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1991
Chevrolet Sprint

3 Cylinder 1.0 Liter
  • Cutting and Welding Required During Installation
1995
Chrysler Cirrus

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1995
Chrysler Cirrus

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1979
Chrysler Cordoba

8 Cylinder 5.9 Liter
  • Cutting and Welding Required During Installation
1992-1993
Chrysler Daytona

4 Cylinder 2.5 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1984-1986
Chrysler Daytona

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1984
Chrysler E Class

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1992-1993
Chrysler Imperial

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1984-1986
Chrysler Laser

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1992-1995
Chrysler LeBaron

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1984-1985
Chrysler LeBaron

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1992-1993
Chrysler New Yorker

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1991-1993
Chrysler New Yorker

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1984-1988
Chrysler New Yorker

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1979-1980
Chrysler New Yorker

8 Cylinder 5.9 Liter
  • Cutting and Welding Required During Installation
1979
Chrysler New Yorker

8 Cylinder 5.2 Liter
  • Cutting and Welding Required During Installation
1981
Chrysler Newport

8 Cylinder 5.2 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1979-1980
Chrysler Newport

8 Cylinder 5.9 Liter
  • Cutting and Welding Required During Installation
1979
Chrysler Newport

8 Cylinder 5.2 Liter
  • Cutting and Welding Required During Installation
1994-1995
Chrysler Town & Country

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1990-1993
Chrysler Town & Country

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1995
Dodge Avenger

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1990, 1992-1995
Dodge Caravan

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1987-1995
Dodge Caravan

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1990
Dodge Caravan

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1985-1987
Dodge Charger

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1977
Dodge Charger

8 Cylinder 5.9 Liter
  • Cutting and Welding Required During Installation
1984
Dodge D100

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1992-1993
Dodge Daytona

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1984-1986
Dodge Daytona

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1992-1993
Dodge Dynasty

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1990-1995
Dodge Grand Caravan

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1994-1995
Dodge Grand Caravan

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1988-1989, 1992-1995
Dodge Grand Caravan

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989
Dodge Grand Caravan

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1985-1989
Dodge Lancer

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1987-1988
Dodge Mini Ram

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1990-1992
Dodge Monaco

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1992-1994
Dodge Shadow

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1992
Dodge Shadow

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1987
Dodge Shadow

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1992-1995
Dodge Spirit

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1981
Dodge St. Regis

8 Cylinder 5.2 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1994-1996
Dodge Stealth

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1991-1993
Dodge Stealth

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1995
Dodge Stratus

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1995
Dodge Stratus

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1995
Dodge Stratus

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1988-1989
Eagle Medallion

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1988-1992
Eagle Premier

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1988-1989
Eagle Premier

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1990-1995
Ford Aerostar

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1990-1995
Ford Aerostar

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1986
Ford Aerostar

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1986
Ford Aerostar

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1983
Ford E-100 Econoline

6 Cylinder 4.9 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1977-1978
Ford E-100 Econoline

6 Cylinder 4.9 Liter
  • Cutting and Welding Required During Installation
1983
Ford E-100 Econoline Club Wagon

6 Cylinder 4.9 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1980-1983
Ford F-100

8 Cylinder 5.0 Liter
  • Cutting and Welding Required During Installation
1980-1983
Ford F-100

6 Cylinder 4.9 Liter
  • Cutting and Welding Required During Installation
1980-1983
Ford F-150

6 Cylinder 4.9 Liter
  • Cutting and Welding Required During Installation
1980-1981
Ford F-150

8 Cylinder 5.8 Liter
  • Cutting and Welding Required During Installation
1980
Ford F-150

8 Cylinder 5.0 Liter
  • Cutting and Welding Required During Installation
1981-1983
Ford F-250

8 Cylinder 5.0 Liter
  • Cutting and Welding Required During Installation
1980-1983
Ford F-250

6 Cylinder 4.9 Liter
  • Cutting and Welding Required During Installation
1982
Ford Mustang

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1981
Ford Mustang

4 Cylinder 2.3 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1993-1995
Ford Probe

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1993-1995
Ford Probe

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1995
Ford Ranger

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1986
Ford Ranger

4 Cylinder 2.0 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Split Date From: From 02/1986
1986
Ford Ranger

4 Cylinder 2.0 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Split Date To: To 12/1985
1986
Ford Ranger

4 Cylinder 2.3 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Split Date From: From 02/1986
1986
Ford Ranger

4 Cylinder 2.3 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
  • Split Date To: To 12/1985
1985
Ford Ranger

4 Cylinder 2.0 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1985
Ford Ranger

4 Cylinder 2.3 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1989-1990
Ford Taurus

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1989-1994
Geo Metro

3 Cylinder 1.0 Liter
  • Cutting and Welding Required During Installation
1985-1990
GMC S15

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1982-1987
GMC S15

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1982-1985
GMC S15

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1983-1984
GMC S15

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1985-1988
GMC S15 Jimmy

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1983-1987
GMC S15 Jimmy

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1983-1984
GMC S15 Jimmy

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1983-1984
GMC S15 Jimmy

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1991-1993
GMC Sonoma

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1994-1995
Honda Passport

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1987-1995
Jeep Cherokee

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1986-1995
Jeep Cherokee

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1975
Jeep CJ6

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1975
Jeep CJ6

6 Cylinder 4.2 Liter
  • Cutting and Welding Required During Installation
1975
Jeep CJ6

8 Cylinder 5.0 Liter
  • Cutting and Welding Required During Installation
1976-1977
Jeep CJ7

8 Cylinder 5.0 Liter
  • Cutting and Welding Required During Installation
1987-1992
Jeep Comanche

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1986-1990
Jeep Comanche

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1978
Jeep J10

8 Cylinder 5.9 Liter
  • Cutting and Welding Required During Installation
1978
Jeep J20

8 Cylinder 5.9 Liter
  • Cutting and Welding Required During Installation
1987-1990
Jeep Wagoneer

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1986-1987
Jeep Wagoneer

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1992-1995
Jeep Wrangler

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1987-1990, 1993-1995
Jeep Wrangler

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1995
Lexus ES300

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1993-1995
Lexus GS300

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1991-1995
Lexus LS400

8 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1990-1994
Lexus LS400

8 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1990-1994
Lexus LS400

8 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1992-1995
Lexus SC300

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1992-1995
Lexus SC400

8 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1988-1990
Lincoln Continental

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1995
Mazda 626

6 Cylinder 2.5 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1995
Mazda 626

6 Cylinder 2.5 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1993-1995
Mazda 626

4 Cylinder 2.0 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1994
Mazda 626

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1993
Mazda 626

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1990-1993
Mazda B2200

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1991-1993
Mazda B2600

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1994-1995
Mazda Miata

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1989-1994
Mazda MPV

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1989-1993
Mazda MPV

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1993-1995
Mazda MX-6

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1993-1995
Mazda MX-6

4 Cylinder 2.0 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1982
Mercury Capri

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1989-1990
Mercury Sable

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1985-1989
Merkur XR4Ti

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1994-1995
Mitsubishi 3000GT

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1991-1995
Mitsubishi 3000GT

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1994-1995
Mitsubishi Diamante

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1993-1995
Mitsubishi Diamante

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1992-1994
Mitsubishi Expo

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1993-1994
Mitsubishi Expo LRV

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1992-1994
Mitsubishi Expo LRV

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1994
Mitsubishi Galant

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1981-1983
Nissan 720

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1992
Nissan Stanza

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1986-1990
Oldsmobile 98

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1980
Oldsmobile 98

8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1992-1993
Oldsmobile Achieva

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1987
Oldsmobile Calais

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1980
Oldsmobile Custom Cruiser

8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1990-1991
Oldsmobile Cutlass Calais

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1988-1991
Oldsmobile Cutlass Calais

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1989-1993
Oldsmobile Cutlass Ciera

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1989-1993
Oldsmobile Cutlass Cruiser

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1994-1995
Oldsmobile Cutlass Supreme

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1990
Oldsmobile Cutlass Supreme

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1991-1992
Oldsmobile Cutlass Supreme
Base
6 Cylinder 3.1 Liter
  • with Single Exhaust
  • Cutting and Welding Required During Installation
1986-1991
Oldsmobile Delta 88

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1986
Oldsmobile Delta 88

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1980
Oldsmobile Delta 88

8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1993-1995
Oldsmobile Silhouette

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1990-1991
Oldsmobile Silhouette

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1975, 1979
Oldsmobile Starfire

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1988
Oldsmobile Toronado

6 Cylinder 3.8 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1986-1987
Oldsmobile Toronado

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1980
Oldsmobile Toronado

8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1992-1995
Plymouth Acclaim

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1985-1988
Plymouth Caravelle

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1975
Plymouth Duster

8 Cylinder 5.2 Liter
  • Cutting and Welding Required During Installation
1978
Plymouth Fury

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1977
Plymouth Fury

8 Cylinder 5.2 Liter
  • Cutting and Welding Required During Installation
1977
Plymouth Fury

8 Cylinder 5.9 Liter
  • Cutting and Welding Required During Installation
1990, 1992-1995
Plymouth Grand Voyager

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1994-1995
Plymouth Grand Voyager

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1988-1989, 1992-1995
Plymouth Grand Voyager

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1980
Plymouth PB100

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1980
Plymouth PB100

8 Cylinder 5.2 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1981
Plymouth PB150

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1981
Plymouth PB150

8 Cylinder 5.2 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1975-1976
Plymouth Scamp

8 Cylinder 5.2 Liter
  • Cutting and Welding Required During Installation
1992-1994
Plymouth Sundance

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1991
Plymouth Sundance

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1987
Plymouth Sundance

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1993, 1995
Plymouth Voyager

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1987-1995
Plymouth Voyager

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1990
Plymouth Voyager

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1987-1991
Pontiac Bonneville

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1981
Pontiac Catalina

6 Cylinder 3.8 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1985-1989
Pontiac Firebird

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1978
Pontiac Firebird

8 Cylinder 5.7 Liter
  • Cutting and Welding Required During Installation
1992-1993
Pontiac Grand Am

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1988-1991
Pontiac Grand Am

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1994-1995
Pontiac Grand Prix

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1990-1995
Pontiac Grand Prix

6 Cylinder 3.1 Liter
  • Dual Exhaust
  • Cutting and Welding Required During Installation
1990-1991
Pontiac Grand Prix

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1981
Pontiac Laurentian

6 Cylinder 3.8 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1987-1990
Pontiac Sunbird

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1993-1995
Pontiac Trans Sport

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1991
Pontiac Trans Sport

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1990-1995
Porsche 911

6 Cylinder 3.6 Liter
  • Cutting and Welding Required During Installation
1981-1989, 1991-1992
Porsche 911

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1984-1989
Porsche 911

6 Cylinder 3.2 Liter
  • Cutting and Welding Required During Installation
1984-1985
Porsche 911

6 Cylinder 3.2 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1978, 1980-1983
Porsche 911

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1980-1982
Porsche 924

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1989-1991
Porsche 944

4 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1982-1984
Renault Fuego

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1995
Saab 9000

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1990-1994
Saab 9000

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1986-1990
Saab 9000

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1991-1992
Saturn SC

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1993-1995
Saturn SC1

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1991-1995
Saturn SL

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1991-1995
Saturn SL1

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1991-1992
Saturn SL2

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1993-1995
Saturn SW1

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1993-1995
Suzuki Sidekick

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1995
Toyota Avalon

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1995
Toyota Camry

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1988-1991
Toyota Camry

6 Cylinder 2.5 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1990-1993
Toyota Celica

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1981-1982
Toyota Cressida

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1991-1995
Toyota Previa

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1987-1992
Toyota Supra

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1988-1989
Toyota Van

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1989-1991
Volvo 780

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation

Who is MagnaFlow?

MagnaFlow is an aftermarket exhaust manufacturer established in 1981. They have been doing what Vivid Racing considers to be one of the best performance exhaust systems available in the market today. The company has been in business for over 35 years and has supplied numerous kits to different enthusiasts all around the world.

Three is Key

MagnaFlow has been known for three things, Quality, Power, and Sound. All their products are made having these three things in mind. It has to satisfy all of these before they even let their customers have it. This is why MagnaFlow products have been widely accepted by a variety of car enthusiasts. Their eagerness to provide quality products that create power and a distinct sound has made the company a success.

QUALITY

As a market leader, MagnaFlow uses premium components and the latest technology to achieve the highest levels of performance and endurance. The company offers a wide range of aftermarket products. From direct-fit catalytic converters and full performance stainless steel exhaust systems to universal mufflers and kits which can be used to fabricate an exhaust for nearly any application. As an ISO-9001 certified company, they stand behind its quality, durability, and performance with a lifetime warranty.

POWER

For nearly 40 years, MagnaFlow exhausts have had a reputation for power among automotive enthusiasts. With a dedicated research & development department, the latest technology is always right around the corner. Every new part passes a strict performance and quality check using in-ground dynamometers, multiple flow benches, and advanced sound testing equipment. If a product doesn't meet a specific power output range, then it doesn't make the cut.

SOUND

MagnaFlow is committed to providing exhaust systems and parts that bring out your ride's true voice. Their secret? An ultra-efficient straight-through design with a perforated stainless steel core, mesh wrap, and acoustical fiber fill. From the way the company designs to how they pack the fill, these classic aftermarket add ons produce that deep, smooth tone you love every time.

Advanced Manufacturing Technology

The company utilizes the industry's most advanced manufacturing pieces of machinery and designing software technology to create a superior product compared to others. The company offers a wide range of products from bolt-on kits that would fit a specific vehicle like an OEM part, a universal muffler that can be used to any application, or a custom made kit for those who are a bit more serious when it comes to performance.

We have the MagnaFlow performance exhaust systems and parts for nearly any type of vehicle and configuration.

MagnaFlow Exhaust Systems

  • American Muscle Exhaust Systems
  • Truck Exhaust Systems
  • SUV Exhaust Systems
  • UTV Exhaust Systems

MagnaFlow Configurations

  • Cat-Back Exhaust Systems
  • Axle-Back Exhaust Systems
  • Crossmember-Back Exhaust Systems
  • Turbo-Back Exhaust Systems

MagnaFlow Mufflers

  • Popular Performance Mufflers
  • Straight-Through Mufflers
  • Glasspack Mufflers
  • Universal Mufflers
  • Mufflers With Tips

MagnaFlow is EPA Compliant and Practices Sustainability

As a national leader in aftermarket catalytic converters, MagnaFlow depends on three precious metals to build their products: Platinum, Palladium, and Rhodium. The company helps maintain precious resources by extracting them from old converters to go back into the supply chain. MagnaFlow has started a program to pass on a portion of the value of the precious metals to customers in the form of a MagnaFlow Visa® Prepaid Card. After you install your new replacement part, you can ship them your old OEM part at no cost.

Find MagnaFlow at Vivid Racing

If you are in search of an exhaust system that does not only make your car sound good but makes it go faster as well, then MagnaFlow is the brand for you. With a complete line of products to choose from, they would definitely have the right exhaust for your specific needs.

Vivid Racing is proud to offer premium aftermarket parts and builds from some of the biggest names in the business. From the power and performance of MagnaFlow exhausts to the style and advanced technology of our aftermarket headlight collection, we've got your ride covered from bumper to bumper. If you can't find a specific part you need or you have questions, please contact our expert sales team at (480) 966-3040.

PERFORMANCE EXHAUST PRODUCTS WARRANTY
The manufacturer warrants that all MagnaFlow Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.

This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.

The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.

No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
  • Stainless Steel Systems: Limited Lifetime Warranty against Manufacturing Defects
  • Black Finish Systems: 1 Year Warranty on Black Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Titanium Finish Systems: 1 Year Warranty on Titanium Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Carbon Fiber Systems: Limited Lifetime Warranty against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
  • Aluminized Systems: 1 Year Limited Warranty
  • Stainless Steel Mufflers: Limited Lifetime Warranty against Manufacturing Defects
CATALYTIC CONVERTERS WARRANTIES
Original Warranty Certificate and Installation Statement:
To be completely filled out by installer and returned to manufacturer. Include dealer name, complete address and phone number. Include customer name, complete address and phone number. Vehicle make, year, model, engine size, mileage and date must be filled out. The part number installed must be filled out. The Installation Statement must be completed by installer, stating the reason for replacement. Vehicle owner and installer must sign and date the Warranty Certificate /Installation Statement.

Catalytic Converter Warranty Statement Installer's Copy:
To be retained by Installer with copy of the invoice for six (6) months.

Customer's Copy:
To be retained by the vehicle owner.

Catalytic Converters are emission control devices which are designed to last the life of the vehicle and do not normally require replacement. Furthermore, if the vehicle is properly used and maintained, original converters are covered by the emission control warranty for 8 years or 80,000 miles. Federal law prohibits repair businesses from replacing these devices except under certain limited circumstances. In order to verify that proper circumstances exist, the owner of the vehicle on which such repairs are made and a facility representative must sign the required statements on the warranty card. To avoid failing a warranty audit, please follow the instructions to ensure the new cards are filled out correctly and distributed accordingly.

MOTORCYCLE PRODUCTS WARRANTY
MagnaFlow motorcycle exhaust products, including Arlen Ness by MagnaFlow exhaust systems, are warranted against defects in material and/or assembly workmanship only for a period of 1 year from invoice date. This Warranty is void if the Product is not installed properly on the vehicle for which it is designed. This Warranty does not apply to any Product which has been installed on any commercial or racing vehicle or which has been improperly installed, modified, altered or subjected to misuse or damage from accidents; including excessive heat. Also, cost of labor and any additional parts or components required to complete installation of a replacement Product are not covered by this Warranty; including coatings, paints and/or finishes, flaws or rust. MagnaFlow including Arlen Ness by MagnaFlow exhaust systems are designed to fit and operate on original OEM motors and chassis with no modifications of any type on the motorcycle.

Proof of purchase from an authorized retailer must accompany any warranty claim. The original Product that is deemed to be under warranty may only be returned and/or exchanged for a Product of the same part number. No other warranty, expressed or implied (including merchantability), applies to the Products, nor is any person including the manufacturer authorized to assume any other warranty. Dealers and distributors are not authorized to make warranty judgments or claims regarding MagnaFlow products. The manufacturer does not assume any responsibility for any consequential damages occasioned by the Product, or inconvenience or interruption in any operation, service or shipping. All approved warranty returns must be accompanied by a return authorization number. Parts returned to MagnaFlow without a return authorization and accompanying documentation may be refused. No parts will be accepted with freight due.

This warranty gives you specific legal rights. You may also have other rights which may vary from State to State. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

The warranties set forth herein are exclusive and, unless otherwise required by applicable law, no other warranties are made by MagnaFlow or are authorized to be made with respect to the Product.

Vendor Media File

Click to Download here

Vendor Media File

Click to Download here

Check out these other great products