.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Jeep Wrangler
Select the year of your Jeep Wrangler:
The Motobilt Jeep LJ competition cut corner armor is designed for serious off roading. They provide complete protection from your door to your tail gate keeping your Jeep's body safe no matter the terrain. These corners were engineered utilizing the latest in technology. First they are modeled in the most advanced software to ensure the best possible fit. Next, an in house Motobilt CNC laser cuts the 3/16 inch thick high strength steel plate. Finally using specially made tooling they are cnc formed to precise tolerances.
These process in design and fabrication allows for a great fit on your Jeep LJ. Every aspect of production from design, fabrication, to shipping is all done in house at Motobilt. This allows us to ensure the best in American made quality. The competition cut allows you to run much larger tires and gives room to stretch your wheel base. These corners are perfect with our Jeep LJ back half kit. You can really move the rear axle back to get the wheel base you need and provide a great departure angle for those really big rocks!
When installing these corner guards you will need to cut much of the factory sheet metal away including the boxed in portion on the interior of your stock corners. Usually this requires the factory body mount to be removed also. A good way to reinforce this area is to tie the roll cage into the rear section of the frame. All of the mounting locations are countersunk to keep the side of your Jeep clean and slick. Flush mount hardware is included. Most of the hardware uses a through hole with a nyloc nut on the back side. There are a few locations where the back side can not be accessed so a nut sert is provided and will be used in these locations.
Features:
These process in design and fabrication allows for a great fit on your Jeep LJ. Every aspect of production from design, fabrication, to shipping is all done in house at Motobilt. This allows us to ensure the best in American made quality. The competition cut allows you to run much larger tires and gives room to stretch your wheel base. These corners are perfect with our Jeep LJ back half kit. You can really move the rear axle back to get the wheel base you need and provide a great departure angle for those really big rocks!
When installing these corner guards you will need to cut much of the factory sheet metal away including the boxed in portion on the interior of your stock corners. Usually this requires the factory body mount to be removed also. A good way to reinforce this area is to tie the roll cage into the rear section of the frame. All of the mounting locations are countersunk to keep the side of your Jeep clean and slick. Flush mount hardware is included. Most of the hardware uses a through hole with a nyloc nut on the back side. There are a few locations where the back side can not be accessed so a nut sert is provided and will be used in these locations.
Features:
- Jeep LJ competition cut corners
- CNC laser cuts the 3/16 inch thick high strength steel plate
- 4.5 inch hole laser cut in back for a flush mount led taillight
- Hardware included
- Sold as pair
- Jeep Wrangler TJ Unlimited 2004-2006
- These corners are designed to work with the Motobilt rocker guards MB1062 and MB1062-S. They work perfectly together to keep your Jeep's body completely protected
- Ships raw steel, paint or powdercoat needed before use
- Please test fit all of your Motobilt products before you paint them
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Jeep Wrangler | 2004-2006 | Unlimited |
| Jeep Wrangler | 2004-2006 | X |
| Jeep Wrangler | 2004 | Sahara |
| Jeep Wrangler | 2004-2006 | Sport |
| Jeep Wrangler | 2004-2006 | Rubicon |
| Jeep Wrangler | 2004-2006 | SE |
| Jeep Wrangler | 2005-2006 | Unlimited Rubicon |
| Jeep Wrangler | 2006 | 65th Anniversary Edition |
| Jeep Wrangler | 2006 | X 65 Aniversario |
Motobilt was founded in 2012 by offroading pioneer, Dan DuBose and is located at Ozark, Alabama. The company specializes in creating aftermarket parts for various offroad vehicles and Jeeps. They have consistently provided high-quality products. Hence, they have become the brand of choice by multiple offroaders worldwide.
Proudly made in the USAAll of Motobilt’s products are made in the USA. With more than 40 professionals working in their 85,000 square foot facility, the company is able to maintain and control their high-quality standards and provide their customers with the best value for their money.
Making Use of Advanced TechnologyThe company uses state-of-the-art technology in creating their products such as Laser Cutters, Press brake forming, CNC machines, Tube Benders, MIG and TIG welding machines, and more. They utilize the latest 3D CAD Software to create precise and accurate designs that fit perfectly in the vehicle.
Their products are made out of the best raw materials available in the market. This helps in making their product strong and durable that it can handle the toughest terrain encountered during off-roading.
Purchase Motobilt Products at Vivid RacingIf you want to turn your vehicle into a reliable offroading machine, you need parts designed for the occasion and Motobilt is the brand for you. They offer suspension parts, bumpers, stiffeners, chassis reinforcement parts, billet products, and other offroad accessories. If you want a brand that you can depend on, then you came to the right place. Visit Vivid Racing and check out their list of products that would fit your specific needs.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.