Save up to 40% on VR Forged wheel sets! - Shop Now
SEATS - AFFIRM
  See all Fuel Components products

Paxton 10:1 with -4 Fittings Fuel Management Unit

$262.99

Paxton Superchargers

Model #6Z110-112


Shopper Award

Paxton Products has continued to lead the industry in blower innovation through the years, culminating in the introduction of the most efficient 10–20 hp blowers in the world in 2016: Paxton’s PX-Series Ultra High Efficiency Centrifugal Blowers. In 2019, Paxton launched the 3–7.5 hp PX-series blowers, improving efficiencies for these smaller, lower horsepower models, making the full Paxton line ultra-efficient.

Paxton Products was also a pioneer in the development of air knives and other air delivery devices, and is widely regarded as the foremost expert in air flow systems and solutions. Paxton has refined today’s air delivery device designs for today’s applications for precision-drying, coating control, removal of dust and other unwanted materials, as well as air curtains and other drying applications. The CapDryer, introduced in 2015, and the CanDryer, a new product in 2019, combine superior air flow and drying capability with ease of installation and use with enhanced production floor safety. Paxton Products’ technical application engineers have decades of experience and can design a solution for your application needs.

The Vortech Standard Fuel Management Unit (FMU) is designed for use on multi-point electronic fuel injected engines. It is a secondary fuel regulator that installs in series with a stock regulator on the return line to the tank. The unit increases fuel pressure in proportion to boost pressure (this assumes the pump being utilized is of sufficient pressure and flow to deliver the fuel required). All Vortech FMUs feature CNC machined, 6061-T6 aluminum construction and a blue anodized finish. The 12:1 FMU is standard in many Vortech systems. It is suitable for most applications running with original equipment injectors to maintain an air-to-fuel ratio of approximately 10.8 to 11.5:1 under boost. The pump utilized needs to provide sufficient flow to deliver the fuel pressure required in proportion to boost. The 10:1, 8:1 and 7:1 FMUs are for Vortech applications that require less fuel pressure to maintain safe air-to-fuel ratios. The 6:1, 4:1 and 3:1 FMUs were designed for high-output custom applications where larger than stock injectors have been employed. For example, the 6:1 FMU can be used on Mustangs using either 30 or 36 lbs. per-hour injectors. The 4:1 unit was designed for either 38 or 42 lbs. per-hour injectors in the same application. Vortech FMU Recalibration Kits include a new ring, washer and fluorosilicone diaphragm.



Recommended calibrations for commonly used injector sizes: 12:1 - 19lb./hr Injectors, 10:1 - 24lb./hr Injectors (Cobra), 8:1 - 24lb./hr Injectors (GT/LX), 6:1 - 30lb./hr Injectors, 4:1 - 38/42lb./hr Injectors, 3:1 - 50lb./hr Injectors

Notes:

  • For conversion from CC injectors, divide by 10.5 (i.e. 440cc injectors = 42lb./hr)

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Who is Paxton?

Paxton Automotive is a well-known manufacturer of superchargers for automotive use. They are based in the US and are known for their centrifugal-type superchargers. 

Though there are factory-installed superchargers available in the market, the majority of their sales still come from the aftermarket industry. Today, you often see them installed in domestic American muscle cars and has been the go-to brand of top racing teams worldwide.

Pre War Technology

Robert Paxton McCulloch initially started the supercharger design way back in 1937. Installed in a Flathead V8, it was a popular modification at that time. 

After the war, the supercharger design was developed and sold to the public. It was then used for Nascar Racing before it was banned after one year due to its regulation. It has continued to evolve over the years and was used by multiple manufacturers and even by US Navy Submarines.

Ultimate High-Performance upgrade

Already proven in the race track, Paxton has developed products that are a guaranteed upgrade for any engine. Used by many racers and enthusiasts, it has produced winners at the track and has been consistently at the forefront when it comes to centrifugal design superchargers.

Quality in Every Product

All of Paxton’s products are designed with quality in mind. Using their experience and race-proven knowledge, they can develop parts that consistently meet customer expectations. Using high-quality materials such as billet steels and aerospace-quality high-speed bearings, they create products that can outperform their competitors. 

Compact Design

One reason why a lot of enthusiasts and engine builders choose Paxton is because of their compact and efficient design. The first type of supercharger is called a roots supercharger which requires you to install it on top of the engine. This design is a bit hard for daily use as it requires modifying the vehicle’s hood and it lessens front visibility. Paxton introduced a solution for this, It allowed them to position it within the tight spaces of the engine bay requiring no modification on the bodywork of the car. They also offer kits that do not require a separate drive system making the installation simple.  

Purchase Paxton Superchargers at Vivid Racing

If you are in search of a quality power adder for your vehicle, then Paxton is the brand for you. It offers a direct bolt-on kit for a variety of vehicles and comes with all the necessary hardware required for the install. To know more about Paxton, visit Vivid Racing and see the list of superchargers and accessories available for your specific needs.

 

All Vortech supercharger systems are covered by an exclusive 3-year unlimited mileage warranty and exclusive supercharger efficiency guarantee standard. Forcepower Parts carry a 90-day limited warranty.

Check out these other great products