$499.99
Model #69-7070TP
Free Shipping
Hurry Low Stock
The K&N 69-7070TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 300Z 3.5 Liter V6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7070TP cold-air intake consists of a roto-molded plastic intake scoop that mounts behind the 350Z's front fascia directing cooler outside air through free-flowing aluminum tubing into the K&N carbon fiber topped air box. Inside the air box is a black rubber topped K&N high-flow air filter connecting to a mandrel-bent, 3" aluminum induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The intake tubes have an attractive silver powder-coat finish that's made to last. The cold-air intake system accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. The tools needed for installation are a screwdriver, pliers, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Features:
WARNING: Cancer and Reproductive Harm
Make Vehicle | Model | Submodel | Year | Engine | Notes |
---|---|---|---|---|---|
2003-2006 Nissan 350Z |
350Z | 2003-2006 | 6 Cylinder 3.5 Liter |
|
K&N, formally known as K&N Engineering, Inc., is the world’s leading manufacturer of washable performance air filters and cold air intake systems. K&N manufactures over 12,000 parts for a wide range of makes and models of motorcycles, cars, SUV, trucks, industrial applications, and more. K&N was founded in 1969 and is headquartered in Riverside, California in a complex of 10 buildings compromising approximately 400,000 square feet. K&N also operates facilities in China, England, and the Netherlands.
In the early 1960s, two motorcycle racers, Ken Johnson and Norm McDonald (K&N) developed a revolutionary idea for an air filter—one that could perform under the demands of dusty, dirty off-road environments. After experimenting with different types of filter media, they discovered that an oiled cotton design allowed the filter to capture contaminants efficiently, and also be washed and reused. It was right then and there that the original K&N High-Flow Air Filter was born. Fifty years later, K&N is still dominating the industry with leading filtration technology and innovative products that offer extraordinary protection for virtually every application out there.
All K&N products undergo rigorous testing to make sure they adhere to and exceed demanding quality standards. These tests include power, torque, and airflow tests to confirm that the intake products are maximizing power boost while retaining engine safety. The company stands behind its product 100 percent with some of the most extensive warranties in the business – a Million Mile Limited warranty. K&N’s performance air intake systems are designed to improve airflow to the engine by replacing the restrictive factory system with a single aerodynamic tube and highly efficient filter media. The systems are available in two materials. The first is Polyethylene, which is used to produce 57 and 63 series intake systems. The second one is aluminum, which can be found on the 69 and 77 series intake systems.
The benefits of adding a K&N intake system to your car are plenty. Firstly, it will increase your vehicle’s horsepower and torque, while also improving fuel economy and the appearance of your engine bay. What’s more, it will deliver a satisfying, more aggressive exhaust note at higher RPMs. Each K&N intake includes an oversized filtering unit, which can go up to 100,000 miles between cleanings, unlike paper filters that can become clogged easily and cannot be washed or reused. In other words, with K&N products, you will never have to replace your air filter again.
Internal combustion engines all work as large air pumps. Air goes in, fuel is added, combustion occurs, and air goes out. This means there are two ways of increasing power: getting more air into the engine or making it easier for air to get out of the engine. Your air intake is responsible for filtering air before it enters your engine. Dirty air can damage the engine cylinder walls, so a high-quality filter is a must-have item. With a K&N system or filter, you increase airflow through the filter, which means more air is pulled into the engine. K&N does this without reducing filtration qualities, so your engine will live a long life.
Vivid Racing carries an extensive inventory of K&N products ranging from air filters, oil filters, air injection systems, fuel filters and pumps, sensors, carburetors, cold air intakes, and much, much more! If you cannot find a particular item above, please call us at (480) 966-3040 and we will help you find it. We are also here to answer any product questions, regarding usage, benefits, and fitment. Don’t delay! Improve your vehicle’s performance today with K&N Intakes.
K&N Oil Filters | K&N Replacement Filters | K&N 57 Series Intakes | K&N 69 Series Typhoon Intakes
K&N 77 Series Intakes