Permatex Anaerobic Gasket Maker is a noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015? and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service.
For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, transfer cases, split crankcases, pumps, and housings.
To Make a Gasket:
- Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
- Spray Permatex Surface Prep activator on one surface only. Allow to dry 1-2 minutes.
- Apply a continuous bead of sealant to the unprimed surface.
- Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth and shop solvent.
To Dress a Gasket:
- Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
- Spray Permatex Surface Prep activator to both flange surfaces. Allow to dry 1-2 minutes.
- Completely cover both sides of the precut gasket with sealant.
- Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.
Safety Data SheetTechnical Data SheetFeatures:- Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable
- Fills gaps to .015"
- Cures to a solvent-resistant seal that will not tear or decay during service
- Parts disassemble easily even after extended service
- Old gasket material can be removed in minutes with a putty knife
Specifications:- Units Per Case: 6
- Size: 50 ML