Permatex?s Penetrating Grade Threadlocker Green is a low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2? (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Conforms to ASTM D5363 AN0261 (Mil-S-46163A, Type III, Grade R).
Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, and hairline cracks.
Directions:- Clean and dry parts using Permatex Surface Prep activator.
- Assemble parts and make adjustments.
- Apply Threadlocker where thread enters parts. Refer to Technical Data Sheet for complete information.
**Threadlocker works on metal parts. It is not recommended for plastics. To disassemble parts, weaken cured Threadlocker by heating above 500 DegreeF (260 DegreeC); then use hand tools to separate components.
Safety Data SheetTechnical Data SheetFeatures:- Low viscosity threadlocking liquid
- Wicks along threads of preassembled fasteners to secure them in place
- Applied after assembly
- Ideal for fasteners ranging from #2 to 1/2" (2.2 to 12mm)
- Removable with hand tools
Specifications:- Units Per Case: 12
- Size: 6 ML