The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted create each seat bracket using the floor of the vehicle as a reference. They literally bring each vehicle into they're development center so they can create the best fitting, bolt in, universal seat bracket possible.
Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride, Cipher Auto, Cobra, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat and applications are available for many vehicles. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA.
WARNING: Cancer and Reproductive Harm
Toyota Land Cruiser