See more parts for Mitsubishi Lancer
Select the year of your Mitsubishi Lancer:
Product thumb
Power Stop Z26 Street Kit w/Calipers Front & Rear Mitsubishi Lancer 2008-2017
$1081.95
Free Shipping

Power Stop Z26 Street Kit w/Calipers for Mitsubishi Lancer (2008-2017)

If you’re looking to boost your Mitsubishi Lancer’s braking performance, the Power Stop Z26 Street Kit w/Calipers is the perfect solution. Designed specifically for high-performance and modified vehicles, this kit has everything you need to elevate your driving experience.

Why Choose the Power Stop Z26 Kit?

This upgrade kit comes complete with brake pads, rotors, and premium stainless steel hardware, making installation a breeze. The combination of Drilled & Slotted rotors and Carbon-Fiber Ceramic pads guarantees shorter stopping distances, even under the most demanding conditions. Plus, with our low dust and noise formula, you can spend less time cleaning and more time enjoying the ride.

Key Features

  • Z26 Carbon-Fiber Ceramic Brake Pads: Perfectly engineered for muscle cars and high-performance vehicles.
  • Premium Stainless Steel Shims: Ensures better heat dissipation and virtually noise-free braking.
  • Drilled, Slotted & Zinc Plated Rotors: Provides maximum cooling and protects against rust and corrosion.
  • High-Quality Stainless Steel Hardware: Ensures durability and reliability.
  • Hi-Temp Brake Lubricant: Enhances performance and longevity of the braking system.

Break-In Procedure

To get the most out of your new brakes, follow this break-in procedure:

  • Start with 5 moderate to aggressive stops from 40 mph to 10 mph in quick succession, without letting the brakes cool down. Avoid coming to a complete stop during this process.
  • Next, perform 5 moderate stops from 35 mph to 5 mph, again in rapid succession. You may notice a slight resin smell as the brakes heat up. After these stops, drive for about 5 minutes at a moderate speed to allow cooling.
  • Once the brakes have cooled to standard operating temperature, feel free to use them normally. Remember, never cool your brakes with water, as this can cause damage.

Fitment

  • Compatible with Mitsubishi Lancer models from 2008 to 2017.

Frequently Asked Questions (FAQs)

1. How easy is it to install the Power Stop Z26 Kit?

Installation is straightforward, especially with the included stainless steel hardware. If you're comfortable with basic tools, you should be able to handle it without professional help.

2. Will this kit reduce brake dust?

Yes! The Carbon-Fiber Ceramic pads are designed to produce minimal dust, keeping your wheels cleaner for longer.

3. Is this kit suitable for daily driving?

Absolutely! While it excels in high-performance situations, it’s also perfect for everyday use, providing reliable stopping power without excessive noise or dust.

4. What should I do if I experience brake noise after installation?

Some noise can be normal during the break-in period. If the noise persists, ensure that all components are properly installed and consider checking the brake pad alignment.

Customer Reviews

Customers have praised the Power Stop Z26 Street Kit for its impressive stopping power and ease of installation. Many have noted a significant improvement in their vehicle's braking performance, especially under heavy use. The low dust formula has also been a hit, making maintenance a breeze.

Upgrade your Mitsubishi Lancer’s braking system with the Power Stop Z26 Street Kit w/Calipers and experience the difference in performance and reliability!

Other Part Numbers:
Power Stop #psbKC4017A-26

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
Mitsubishi Lancer 2008-2017 GTS
Mitsubishi Lancer 2008-2016 DE
Mitsubishi Lancer 2008-2017 ES
Mitsubishi Lancer 2009-2015 Ralliart
Mitsubishi Lancer 2009 Special Edition
Mitsubishi Lancer 2009-2017 SE
Mitsubishi Lancer 2010-2011 Ralliart Sportback
Mitsubishi Lancer 2010-2011 GTS Sportback
Mitsubishi Lancer 2011-2015 GT Sportback
Mitsubishi Lancer 2011-2015 SE Sportback
Mitsubishi Lancer 2011-2016 GT
Mitsubishi Lancer 2011-2014 ES Sportback
Mitsubishi Lancer 2014 Limited Edition
Mitsubishi Lancer 2015 Evolution Final Edition
Mitsubishi Lancer 2015 SE Limited Edition Sportback
Mitsubishi Lancer 2015-2017 SE Limited Edition
Mitsubishi Lancer 2015 Evolution MR
Mitsubishi Lancer 2015 Evolution GSR
Mitsubishi Lancer 2016-2017 SEL

Power Stop Logo

Who is Power Stop?

Power Stop is a company that has been in the manufacturing business for the last 20 years.

They are known for bringing top-quality brake upgrades to every enthusiast and vehicle on the road, whether you drive a pickup, sports car, or minivan. Today, they are one of the best brands in the automotive brake industry.

Braking Experts

The company has always been at the forefront of creating advanced braking components. Their kits are designed to fit perfectly on the specific vehicle and come with all the necessary hardware needed for the install. They cater to various cars that cover everything from current model year trucks, all the way back to classic muscle cars, and everything between.

Highest Quality Products

Each product is manufactured using the best materials possible. They use carbon-fiber ceramic, which is one of the most exotic materials globally and is used by many industries for its high-performance application. Their brake products are some of the best in the market and provide a noise-free,dust-free, and fail-free braking experience. 

Their engineers work hard to ensure everything they create is a direct bolt-on replacement for the original brakes. It makes it easy for many enthusiasts to upgrade their vehicle’s braking performance.

Purchase Power Stop Products at Vivid Racing 

If you are in the market for high-quality braking components for your vehicle, then Power Stop is the brand for you. To know more about Power Stop and what they can offer, visit Vivid Racing and check out their list of products that fit your specific requirement.

Power Stop, LLC Limited Warranty

POWER STOP ROTORS AND PADS ARE FOR STREET AND RECREATIONAL OFF-ROAD USE ONLY. THEY ARE NOT DESIGNED OR APPROVED FOR OFF-ROAD RACING OR COMPETITIVE DRIVING. FAILURE OF COMPONENTS USED FOR ANY TYPE OF RACING IS NOT COVERED UNDER WARRANTY.

POWER STOP BRAKE KITS (Z16, Z23, Z26, Z36, AND Z37 PERFORMANCE KITS EXCLUDING CALIPER KITS), PURCHASED AND INSTALLED AS A KIT

If a customer is not satisfied with the quality and performance of a kit for any reason within 60 days of the invoice date or the installation date by a professional technician (an invoice from the installation shop is required), and the required break-in procedure was implemented, Power Stop LLC will provide a one-time exchange of the kit for a new one. This no-questions-asked, 60 day warranty must be facilitated by the authorized Power Stop retailer.

Power Stop LLC warrants this product to be free from defects and poor workmanship for 3 years from the purchase date or 36,000 miles of use, whichever occurs first. The product, when properly installed on the type of vehicle prescribed, and in which a defect in workmanship or material is found, will be exchanged free of charge if returned to the seller who is authorized to give this warranty. Power Stop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This warranty includes rotor cracking. The 3-year/36,000-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation. Normal wear is not covered by this warranty.

POWER STOP BRAKE KITS WITH CALIPERS (KCL KITS WITH Z16, Z23, Z26, Z36, OR Z37 PADS), PURCHASED AND INSTALLED AS A KIT:

If a customer is not satisfied with the quality and performance of a kit for any reason within 60 days of the invoice date or the installation date by a professional technician (an invoice from the installation shop is required), and the required break-in procedure was implemented, Power Stop LLC will provide a one-time exchange of the kit for a new one. This no-questions-asked, 60 day warranty must be facilitated by the authorized Power Stop retailer.

Power Stop LLC warrants this product to be free from defects and poor workmanship for 3 years from the purchase date or 36,000 miles of use, whichever occurs first. The product, when properly installed on the type of vehicle prescribed, and in which a defect in workmanship and material is found, will be exchanged free of charge if returned to the seller who is authorized to give this warranty. Power Stop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This warranty includes rotor cracking. Normal wear is not covered by this warranty. Failure of components due to using non-approved DOT 5 Silicone brake fluid is not covered by this warranty. This warranty also excludes stripped bleeder and banjo bolt holes caused by over-tightening. The 3-year/36,000-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation.

AUTOSPECIALTY OE REPLACEMENT BRAKE KITS BY POWER STOP (KOE KITS), PURCHASED AND INSTALLED AS A KIT:

Power Stop LLC warrants this product to be free from defects and poor workmanship for 90 days from the purchase date or 3,000 miles of use, whichever occurs first. The product, when properly installed in the type of vehicle prescribed, and in which a material or workmanship is found, will be exchanged free of charge if returned to the seller who is authorized to service this warranty. Power Stop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. The 90-day/3,000-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation. Normal wear is not covered by this warranty.

POWER STOP ROTORS OR PADS PURCHASED SEPARATELY:

Power Stop LLC warrants its rotors and pads to be free from defects in materials or workmanship for 30 days from the purchase date or 500 miles of use, whichever occurs first. The product, when properly installed in the type of vehicle prescribed, and in which a material or workmanship defect is found, will be exchanged free of charge if returned to the seller who is authorized to service this warranty. Power Stop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This 30-day/500-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation. Normal wear is not covered by this warranty.

GENERAL PROVISIONS:

Power Stop LLC warrants its rotors and pads to be free from defects in materials or workmanship for 30 days from the purchase date or 500 miles of use, whichever occurs first. The product, when properly installed in the type of vehicle prescribed, and in which a material or workmanship defect is found, will be exchanged free of charge if returned to the seller who is authorized to service this warranty. Power Stop LLC is not responsible for its products when they are subjected to misuse, abuse, improper application, improper installation, or accident. This 30-day/500-mile warranty excludes failure of components due to disc thickness variation (DTV*), usually indicated by brake pulsation. Normal wear is not covered by this warranty.

NO PERSON IS AUTHORIZED BY POWER STOP TO MODIFY OR ADD TO THE FOREGOING WARRANTY.

 

*The primary cause of DTV, or “warped brake rotors,” stems from using an improper break-in procedure or executing long stops from high speeds without properly releasing the brake pedal after coming to a stop.

Check out these other great products