.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Nissan 200SX
Select the year of your Nissan 200SX:
Radium Engineering Fluid Lock Dual Catch Can Kit
Perfectly Designed for Your Nissan S15 Silvia | 200SX
If you're a proud owner of a Nissan S15 Silvia or 200SX, you're in for a treat with the Radium Engineering Fluid Lock Dual Catch Can Kit. This kit is crafted specifically to fit your vehicle, ensuring a seamless integration with the factory setup. You won't have to worry about any complicated modifications'this kit mounts using existing factory holes, making installation a breeze!
Key Features
- Large Ports: Equipped with spacious 10AN ORB ports and a 4AN ORB drain port, this catch can kit is designed for efficient fluid management.
- Advanced Oil Separation: The 2-step oil separation baffling effectively removes oil and sludge from your PCV gases before they reach the engine.
- O-ring Sealed Dipstick: Keep an eye on accumulated fluid levels with the handy dipstick that's built right into the catch can.
- Emissions Compliant: Since these catch cans do not vent to atmosphere (VTA), they comply with emissions regulations, making them legal for both street and track use.
- Closed Loop System: This design promotes negative crankcase pressure, optimizing performance while keeping unwanted oil vapors out of your cabin.
Easy Installation
Installation is straightforward'no cutting, drilling, or permanent modifications are needed. Just mount it up, and you're ready to go!
Why Choose Radium?
For the ultimate in engine protection, the Radium 20-0637 Dual Catch Can Kit is the way to go for your Nissan S15 Silvia or 200SX. This kit not only enhances the reliability of your engine but also adds a touch of professionalism under the hood.
Fitment:
- Nissan S15 Silvia | 200SX
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1975-1984, 1995-1998 Nissan 200SX |
200SX | 1975-1984, 1995-1998 |
Radium Engineering is a company that was founded in 2010. The company specializes in designing and producing some of the best aftermarket products in the market. They have produced parts used by various racers and motorsport enthusiasts worldwide. Today, they have established a name for themselves and have become a brand synonymous with performance.
Quality in Every ProductAll of their products are done in house, from research and development, design and manufacturing. They use the latest computer simulation and modeling tools that allow them to create an accurate and precise model. After all is done, they subject their products to an extensive testing procedure to ensure that it is safe to use and performs the way it is designed to.
Not Your Ordinary Stock PartsThe company focuses on manufacturing race-oriented parts and accessories such as surge tank lines and PCV oil catch can systems. They also offer fuel fittings, fuel manifolds, pumps, and fuel regulators designed for high performance applications. All their parts are made out of high quality materials that can withstand extreme forces.
Purchase Radium Engineering Products At Vivid RacingIf you are in search of a high quality fuel system component for your vehicle, then Radium Engineering is the brand for you. Specifically made for high-performance applications, they are the trusted brand of top racers from different racing disciplines everywhere. To know more about Radium Engineering, visit Vivid Racing and check out their list of products that fit your specific needs.
WarrantyAll Radium Engineering brand products are subject to a 1 Year Limited Warranty from the date of original purchase. If a product fails, it will be repaired or replaced at Radium Engineering's option when it has been determined by Radium Engineering to have failed due to defects in materials or workmanship. Warranty claims must be made by the original purchaser. If the purchase was made from a retailer other than radiumauto.com, please contact the place of purchase for further assistance.This warranty is limited to repair or replacement of the merchandise only and shall not, in no event, exceed the original purchase price. Radium Engineering will not be held responsible for secondary or consequential damages or costs (including labor, towing, etc.) incurred due to failure of this product. Standard ground shipping is used for all warranty transactions. Expedited shipping is available, but the cost difference must be paid by the end user in advance of the shipment.Warranty claims must ship pre-paid to Radium Engineering for review. Claims must include the failed part(s), RMA number, and original proof of purchase. If the claim is missing any of these items, it may be rejected and returned to sender. Product must be received by Radium Engineering within 14 days of RMA's issue date. Please note that before Radium Engineering can issue an RMA for any product, it is first necessary for the installer or end user to contact [email protected] to discuss the problem. Most issues can be resolved via email. Under no circumstances should a product be returned or a RMA requested before the above process transpires.This warranty applies to the original purchaser only and is non-transferable. Improper use, installation, modification, abuse, or unauthorized repairs or alterations voids this warranty. Credit for defective products will be issued pending inspection by Radium Engineering. This warranty does not extend to third party products often used in Radium Engineering products, such as fuel pumps, turbochargers, or any other non-Radium Engineering brand products.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.