.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Toyota Supra
Select the year of your Toyota Supra:
Radium Engineering 10AN Male Swivel Banjo Fitting
If you're looking to upgrade your 1993-1998 Toyota Supra, the Radium Engineering 10AN Male Swivel Banjo Fitting is a fantastic choice. This fitting is not just about performance; it's designed to fit seamlessly into your vehicle without the need for any drilling or welding. Just press it in, and you're good to go!
Compatibility
This fitting is specifically tailored for the following Toyota Supra models:
- Toyota Supra Base L6 2997cc (1993-1998)
- Toyota Supra Twin Turbo L6 2997cc (1993-1998)
It's a direct replacement for the PCV valve located on the intake side of the valve cover, making it compatible with:
- Toyota 1JZ-GTE VVT-i
- Toyota 1JZ-GTE Non VVT-i
- Toyota 2JZ-GTE VVT-i
- Toyota 2JZ-GTE Non VVT-i
- Toyota 2JZ-GE Non VVT-i
Key Features
- Durable stainless steel and aluminum construction
- Low profile 10AN male fitting for a sleek look
- Anodized and laser engraved for added style
- Swivel action with Viton O-rings for a secure fit
- Easy press-fit installation
- Installation Guide for your convenience
Important Notes
- The part number 20-0408 is versatile and can be used in various Toyota and Lexus models. However, it will only work if your PCV valve is mounted to the valve cover with the rubber grommet part number 90480-18001 (as shown below).
Additional Fitment
This fitting is compatible with a variety of other Toyota models, including but not limited to:
- Toyota 4Runner
- Toyota Camry
- Toyota Celica 5S-FE
- Toyota Chaser (Excluding 2JZ-GE VVT-I)
- Toyota MR-2 5S-FE
- Toyota Tacoma 3RZ-FE
- Toyota Tundra 2UZ-FE
Upgrade your Toyota Supra with confidence, knowing that the Radium Engineering 10AN Male Swivel Banjo Fitting will provide a reliable and stylish solution for your intake setup!
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1993-1998 Toyota Supra |
Supra | 1993-1998 |
Radium Engineering is a company that was founded in 2010. The company specializes in designing and producing some of the best aftermarket products in the market. They have produced parts used by various racers and motorsport enthusiasts worldwide. Today, they have established a name for themselves and have become a brand synonymous with performance.
Quality in Every ProductAll of their products are done in house, from research and development, design and manufacturing. They use the latest computer simulation and modeling tools that allow them to create an accurate and precise model. After all is done, they subject their products to an extensive testing procedure to ensure that it is safe to use and performs the way it is designed to.
Not Your Ordinary Stock PartsThe company focuses on manufacturing race-oriented parts and accessories such as surge tank lines and PCV oil catch can systems. They also offer fuel fittings, fuel manifolds, pumps, and fuel regulators designed for high performance applications. All their parts are made out of high quality materials that can withstand extreme forces.
Purchase Radium Engineering Products At Vivid RacingIf you are in search of a high quality fuel system component for your vehicle, then Radium Engineering is the brand for you. Specifically made for high-performance applications, they are the trusted brand of top racers from different racing disciplines everywhere. To know more about Radium Engineering, visit Vivid Racing and check out their list of products that fit your specific needs.
WarrantyAll Radium Engineering brand products are subject to a 1 Year Limited Warranty from the date of original purchase. If a product fails, it will be repaired or replaced at Radium Engineering's option when it has been determined by Radium Engineering to have failed due to defects in materials or workmanship. Warranty claims must be made by the original purchaser. If the purchase was made from a retailer other than radiumauto.com, please contact the place of purchase for further assistance.This warranty is limited to repair or replacement of the merchandise only and shall not, in no event, exceed the original purchase price. Radium Engineering will not be held responsible for secondary or consequential damages or costs (including labor, towing, etc.) incurred due to failure of this product. Standard ground shipping is used for all warranty transactions. Expedited shipping is available, but the cost difference must be paid by the end user in advance of the shipment.Warranty claims must ship pre-paid to Radium Engineering for review. Claims must include the failed part(s), RMA number, and original proof of purchase. If the claim is missing any of these items, it may be rejected and returned to sender. Product must be received by Radium Engineering within 14 days of RMA's issue date. Please note that before Radium Engineering can issue an RMA for any product, it is first necessary for the installer or end user to contact [email protected] to discuss the problem. Most issues can be resolved via email. Under no circumstances should a product be returned or a RMA requested before the above process transpires.This warranty applies to the original purchaser only and is non-transferable. Improper use, installation, modification, abuse, or unauthorized repairs or alterations voids this warranty. Credit for defective products will be issued pending inspection by Radium Engineering. This warranty does not extend to third party products often used in Radium Engineering products, such as fuel pumps, turbochargers, or any other non-Radium Engineering brand products.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.