RENNtech proprietary aerodynamic upgrades for the Mercedes Benz SLS!
Our carbon fiber front splitter integrates flawlessly with the original lines of the vehicle while boosting the overall testosterone level of the sporty SLS. RENNtech's one piece front splitter flows seamlessly into the front apron and is a simple, bolt on component which improves vehicle aesthetics and increases front end down force. All this while still maintaining the same approach angle as the OE front fascia so the RENNtech splitter retains the same clearance for parking stops and steep driveways.
This piece was designed and engineered in house by RENNtech and is a fully functional component which functions in complete harmony with our complementary rear diffuser.
Side Rocker Panels:
These proprietary carbon fiber side skirts were designed to complement the RENNtech front splitter and rear diffuser. This side skirt kit includes 4 high quality pre-preg carbon fiber pieces; 2 rocker panel extensions and 2 rear fascia trim pieces. These exceptionally unique and refined aerodynamic pieces complete the RENNtech SLS aero package by integrating flawlessly with the original lines of the vehicle while boosting the overall testosterone level of the sporty SLS.
RENNtech's side skirts feature an OEM level of quality; in addition to perfect fitment to the factory rocker panels and lower rear fascia. Furthermore, these components utilize factory mounting locations within the rocker panels and a few additional hard attachments are required underneath the rear fascia. Finishing of the carbon fiber parts comes in the form of a high gloss UV protectant coating. Matte finish is also available per special request and may require additional lead time.These parts were designed and engineered in house by RENNtech and are fully functional components that feature unmistakably unique styling for the SLS AMG.
Our rear diffuser is the companion component to the front splitter and functions to decrease drag and increase down force by improving the underbody airflow and its transition to ambient air. As with the front splitter, our rear diffuser is manufactured using the high quality prepreg carbon fiber and is a quick and easy install that requires no modifications to the SLS's rear bumper or underbody.
The RENNtech Carbon Fiber Aero Kit for the C197 - SLS AMG includes:
- Front Splitter
- Side Rocker Panels
- Rear Diffuser
- Prepreg carbon fiber construction
- Fully functional
- OEM perfect fit
- A matte finish carbon fiber is also available
- Mercedes-Benz SLS AMG 11-15
RENNtech's objective isto enhance the enthusiast's driving experience by designing and manufacturing the best performance and highest quality automotive products possible. RENNtech warrants that all RENNtech products are free from defects in material and workmanship.A. FOR VEHICLES NOT COVERED BY THE ORIGINAL VEHICLE MANUFACTURER'S NEW CAR WARRANTY
This warranty extends to the original owner only and is not transferable. The warranty begins on the date of purchase (invoice) and ends twenty-four (24) months from this date for parts, and twenty-four (24) months from this date for engine conversions. Due to the variety of modifications and changes made to MercedesBenz cars and/or engines that may affect the performance or durability of related components, RENNtech's obligation under this warranty extends only to the repair or replacement parts manufactured or sold by RENNtech and not for painting, labor, or other parts/components. To file a warranty claim, parts covered under warranty must be returned with proof of purchase, installation and removal date, date of part delivery, customer name and address, type of car, year, engine number, odometer reading, and VIN number. No claims will be considered without valid proof of purchase, all this information and the original RENNtech part. Return freight charges must be prepaid by customer. COD returns will not be accepted. All parts replaced under warranty will become the sole property of RENNtech.B. FOR VEHICLES COVERED BY THE ORIGINAL MANUFACTURERS NEW CAR WARRANTY
This warranty extends to the original owner and is transferable. The warranty begins on the date of part purchase. If the vehicle is currently covered by the original vehicle manufacturer's new car warranty, RENNtech products are warranted for twenty-four (24) months or for the remaining term of the original manufacturers' warranty, whichever is longer. RENNtech will pay for the replacement part (new or remanufactured) and labor at the official Mercedes Benz standard warranty labor rate. Labor will only be covered under this warranty, if the original installation was performed at a RENNtech authorized facility. To obtain service under this warranty, the vehicle must be brought, upon discovery of a defect in material and workmanship, to the workshop of any RENNtech authorized dealer, during normal business hoursC. EXCLUSIONS FOR BOTH WARRANTIES (A AND B)
Parts showing evidence of misapplication, abuse, improper maintenance, alterations from their original configuration, or failure to follow installation instructions are expressly not covered by this warranty. RENNtech also reserves the right to make changes to products, or specifications at any time without obligation to modify earlier parts. No person, company, or other organization is authorized to assume for RENNtech any warranty responsibility or make binding judgments regarding warranties of any parts, which from time to time may become subject of a warranty claim.D. RENNTECH'S LIMITED PRODUCT WARRANTY SPECIFICALLY EXCLUDES:
Shipping charges, towing and rental car charges, damage to a component or assembly due to installation of replacement parts with specifications that differ in any material respect from the original vehicle manufacturer's or RENNtech parts, damage resulting from the unauthorized modification of a RENNtech part, damage resulting from the use of other manufacturers products in conjunction with RENNtech product or system, damage to clutch due to power shifting or abuse, maintenance services and parts when replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant and refrigerant, mechanical adjustments or repairs which result from normal wear and tear, drive belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner's manual from the original vehicle manufacturer or RENNtech product instructions, damage attributed to negligence, improper installation, improper treatment contrary to the instructions in the owner's manual from the original vehicle manufacturer or RENNtech product instructions, damage resulting from improper or contaminated fuel, damage to a RENNtech component as a result of a collision or improper collision repairs, any vehicle/products operated and used in a competitive event, custom designed competition parts, incidental and /or consequential damages, including loss of time, inconvenience or loss of the use of the vehicle. RENNtech's Warranty Policy only applies to RENNtech vehicles and products sold in the US and Canada.E. ECU Re-Flashes
Re-Flashes of the upgraded RENNtech ECU Software are free for the original buyer of the Software during the OEM warranty period (4 years from the delivery date). After expiration of OEM warranty, or for second owner of RENNtech ECU Upgraded vehicles, RENNtech charges a service fee of $500 for regular customers and $200 for participants in the RENNtech Membership program, to re-flash the ECU with the originally purchased software.