The Rywire Infinity 506/508 (6/8h) harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!
If you are building a Front wheel drive race car and need the data and flexibility of the top computers on the market, then this is the harness for you. The AEM Infinity EMS offers some of the best functionality on the market today, and this harness packs a punch, allowing all the necessary terminations. We have worked with some of the fastest front wheel drive race cars in the world and got there feedback. The harness we are offering allows for plenty of expansion, and pre-terminated connectors exactly where you need them.
Pre-terminated for:
COMPUTER Infinity 506 or Infinity 508
Lambda/ Uego Bosch 4.2LSU Wideband O2 sensor
AIR TEMP
Fuel Pressure
Oil Pressure
Exhaust Backpressure (EMAP)
Manifold Pressure (MAP)
Throttle Position (TPS) Factory Honda
Coolant Sensor (ECT) Factory Honda
VTEC Factory Honda
Speed Sensor (VSS Hydro) Factory Honda
Reverse Lights Factory Honda
Starter Trigger Factory Honda
Coils Factory Honda K-series (Smart Coils)
Ground Ring Terminals for Coils and Computer Factory Honda
Knock Sensor Factory Honda
Alternator Factory Honda (OBD0/1 or OBD2 styles available)
Injectors (8 Injector) EV1,EV14,Nippon, and others. We recommend Injector Dynamics ID 2000 or/and ID 1000
Infinity 506 - Up to 6 Low or High Impedance Injectors
Infinity 508 - Up to 8 High Impedance Injectors only
Boost Solenoid (MAC solenoid) Rywire (Rywire 3 port or 4 port kit)
Rear speed expansion Rywire (Rywire rear speed kits for MAG or Hall sensors)
FLEX FUEL capable Rywire (Rywire flex fuel kit )
AUX expansion (Contains power, 5V, sen ground, and 3 AV inputs)
Trigger (CAM/CRANK) AEM/T1/Rywire (easily expandable for AEM EPM, T1 trigger, and Rywire CAM/CRANK trigger)
CAN BUS connectivity AEM NET (connects devices such as loggers, dashes, and gauges)
More info on Rywire harness Trigger system
Rywire understands the necessity for having the best CAM and CRANK trigger possible. Knowing where the crankshaft and camshaft is in the rotation is an essential part of the engines tune, and can make or break a properly built engine.
Our AEM Infinity engine harness is designed to accept:
The AEM EPM (cam trigger) Plugs directly into loom labeled "Trigger 2"
T1 Race Development (cam trigger) Plugs directly into loom labeled "Trigger 1"
Rywire (cam and crank trigger) Plugs directly into loom labeled "Trigger 1" and "Trigger 2"
Chassis adapter options:
This harness can plug and play into any chassis This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.
The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!