.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
The #1 selling EFI conversion just got better...again! We're bundling our top selling Sniper 2 packages and passing along maximum savings! Available for small block Chevrolet, big block Chevrolet, and 8.2-inch deck small block Ford (5.0 base), these kits include a HyperSpark distributor, HyperSpark coil, and a HyperSpark 2 ignition box. Coupled with a 3.5" or 5" color LCD touchscreen handheld, Power Distribution Module (PDM), and either a base or master (in-line fuel system) Sniper 2 kit, these are the most complete Sniper EFI conversion kits ever offered by Holley. The PDM module was specifically designed to provide the easiest wiring experience for Sniper 2 kits that are paired with a HyperSpark ignition. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screws. Battery power, ground, and a switched 12V source are all that's required from your vehicle to power the PDM and your Sniper 2 system.
Make your classic drive like a modern fuel injected vehicle, including better cold starts, smooth drivability, and improved fuel economy. Sniper 2 was designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manuals and online videos. The handheld user-friendly setup wizard has you answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI system. Take complete control and make the conversion to EFI with a Sniper 2 EFI HyperSpark Ignition bundle.
Install Instructions: CLICK HERE!
Features:
Specifications:
Make your classic drive like a modern fuel injected vehicle, including better cold starts, smooth drivability, and improved fuel economy. Sniper 2 was designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manuals and online videos. The handheld user-friendly setup wizard has you answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI system. Take complete control and make the conversion to EFI with a Sniper 2 EFI HyperSpark Ignition bundle.
Install Instructions: CLICK HERE!
Features:
- Hyperspark Ignition:
- Billet aluminum construction unit plugs directly into the main harness and features a Hall Effect crank trigger for a noise free RPM signal to the ECU
- Ignition box keeps all the features of its predecessor in a smaller and lighter design, providing a clean installation, precise timing control, and consistent spark energy from idle to redline for optimal performance
- Integrated ignition coil bracket simplifies mounting the ignition coil while delivering up to 150 mJ of spark energy per second from idle to redline
- Patented clear installation cap eliminates confusion while installing the distributor with a marking indicator
- Sniper 2 Kit:
- Sniper 2 EFI Bundle includes a Power Distribution Module (PDM), HyperSpark 2 ignition box, coil, and a Chevrolet or Ford distributor (depending on your application)
- Available with or without fuel system, the complete fuel system consists of 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, fuel pressure regulator, filters, necessary hardware, and bulkhead fitting to return fuel into the tank
- Sniper 2 Bluetooth module turns your iOS or Android smartphone into a tuning and monitoring interface with a base map to get started and no laptop required
- Power Distribution Module (PDM) was designed to keep your installation stress free by listing a wiring diagram to connect your system to the dedicated circuits
- Supports up to 650 hp naturally aspirated or 575 hp boosted with (4) 100 lb./hr. injectors
- Next generation ECU features improved RF noise and interference resistance (protects against outdated car wiring, noisy alternators, faulty plug wires, etc.)
- Geometrically redesigned throttle shaft and plate for a smoother throttle feel
- Integrated transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications (Sniper 2 Transmission Control Kit and vehicle specific harnesses not included, both available separately)
- Cast-in fuel crossover from the primary to secondary fuel rail
- Only (4) wiring connections required; the Battery+, Battery-, Switched Ignition, and RPM
Specifications:
- Accelerometer Support: No
- Air Metering Style: Speed Density
- Boost Control: No
- Brand: Holley Sniper EFI
- CAN-BUS Support: Yes
- Category: Air and Fuel Delivery
- CFM: 800
- Coast Guard Approved: No
- Coil Per Cylinder Ignition Support: No
- Datalogging Support: Yes
- Distributor Included: Chevrolet Big Block, Chevrolet Small Block, Yes
- Dry Nitrous Control: No
- e85 Support: No
- EGT Support: No
- Emission Code: 3
- Finish: Shiny
- Flange Style: 4150
- Forced Induction HP @ 60 PSI: 575
- Forced Induction Support: Yes
- Fuel Filter Included: No
- Fuel Hose Included: No
- Fuel Injectors Included: Yes
- Fuel Pressure: 58.5 PSI
- Fuel Pressure Regulator Included: No
- Fuel Pump Included: No
- Fuel System: Not Included
- Grade Type: Performance
- Height: 3.28"
- Hyperspark Ignition Kit: Chevrolet Big/Small Block
- Idle Air Control Motor Included: Yes
- Ignition Timing Control: Yes
- Individual Cylinder Fuel Corrections: No
- Injector Quantity: 4
- Injector Size: 100 lb/hr @ 58.5 PSI
- Inlet / Outlet Size: 9/16-18 Female O-Ring (AN 6)
- Intake Manifold Included: No
- Knock Retard Support: No
- MAP Sensor: 2 Bar
- Max Horsepower Rating: 650 Naturally Aspirated
- Maximum Injector Quantity Supported: 4
- Model: 4150 EFI Conversion Throttle Body
- Multi-Stage Nitrous Control: No
- Naturally Aspirated HP @ 60 PSI: 650
- Part Type: Fuel Injection Conversion Kit
- PDM: Yes
- Power Distribution Module: Yes
- Product Type: Sniper EFI
- Progressive Nitrous Control: No
- Self-Tuning: Yes
- Throttle Body Air Flow Rate: 800 2L
- Throttle Body Material: Aluminum
- Throttle Position Sensor Included: Yes
- Traction Control Support: No
- Transmission: All
- User Interface: 5 in Handheld
- User-Tuneable: Yes
- Warranty: Two Year Standard, Extended Via Product Registration
- Wet Nitrous Control: No
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
The company Holley introduced a new category called the Sniper EFI. A reasonably priced product enables customers to take advantage of EFI while still having enough money to finish or upgrade the rest of their bikes. It is ideal for street rods, muscle cars, off-road trucks, and any carbureted vehicle. Cold starts, hesitations, vapor lock, and flooding are no longer an issue. It's excellent for any car in standard with a 2300 Holley Flange, including some Fairlanes, Galaxies, Falcons, Comets, F100s, Javelins, Rebels, Mustangs, Thunderbirds, Cougars, and more. The best thing is its affordable price range because it allows one to benefit from EFI while still having money left over to finish or enhance their ride. It can also be easily converted to a 4bbl intake with a square flange or Q-jet flange using a Mr. Gasket adapter.
TechnologyThe Sniper EFI tuning kits have dual Pattern bolt-on carburetor replacement and are designed to fit 4150 Flange & Spread Bore manifolds. There are no added boxes to escalate with throttle body-mounted ECU. It can support up to 650hp with Four 100 Lb/Hr. Only four wiring connections are needed by the injectors. The regulator for the internal fuel pressure removes any hassle of installing an external fuel pressure regulator.
Product LineThe product line of Sniper EFI includes Sniper EFI 4BBL, Sniper EFI STEALTH 4500, Sniper EFI STEALTH 4150, Sniper EFI QUADRAJET, Sniper EFI 2300 2BBL, Sniper EFI BBD FOR JEEP CJ, Sniper EFI 2GC, Sniper EFI AUTOLITE 1100 ONE BARREL, complete system kits, full tanks, and sniper hyperspark ignition.
VIVID RACING- SNIPER EFIThe products of Sniper EFI at Vivid Racing are Sniper EFI 2300 self-tuning kit classic, master kit shiny finish, hall effect distributor, kit-fuel injector, air plug, and many more on our website.
Vivid Racing carries high-performance parts for almost any need. Click these links to choose from our selection of Body Kits, Big Brake Kits, Seats, Custom Wheels and Tires, Engine Parts, Exhaust Parts, Intakes, Suspension, and Transmission Parts.
Buying from Vivid Racing is the best choice you can make. We back every part we sell with our guarantee of satisfaction.
Buy online or give one of our world-class sales professionals a call at 1-480-966-3040. If you don't see what you are looking for, Call Us.
We can help. Vivid Racing was voted #1 in customer service nationwide!
Hands-On Experience and Professionalism is what makes us the best.
LOOKING FOR OEM PARTS? We can help.
Are you tired of paying overly inflated prices that the dealers charge for their parts? Vivid Racing can save you up to 60% off the dealers' prices. Click here to visit our OEM PARTS STORE.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.