Save up to 40% on VR Forged wheel sets! - Shop Now
Tax Season - Exhaust '24
  See more parts for your Jeep Wrangler

Synergy 4-Door 2" Lift Starter Suspension System Jeep Wrangler JL | JLU

$1,070.00

Synergy MFG

Model #8840-2000


Shopper Award

Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when we are designing components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised. All of these systems have shock solutions available, whether it be shock relocation brackets to continue using the stock shocks in our Starter System or one of our Synergy MFG tuned shock packages aimed at affordability or performance. Coil springs and shocks are two of the largest determining factors in ride quality and a mismatched system will never perform to its potential. All Synergy MFG tuned shocks are matched to the coil springs and application to provide the best ride and performance possible.

The Jeep JL / JLU Starter System is a coil spring 2-inch lift designed around 37-inch tires for Rubicon models and 35-inch tires for non-Rubicon models (See fender and bump stop spacing recommendations below). This system is designed to be the most capable performance coil spring lift on a budget, with room to upgrade as funds allow. For more complete 2-inch lift systems, see the Stage 1 or Stage 2 systems.

Install Instructions:

Features:
  • Budget coil spring suspension system to easily fit larger tires
  • Improved off road and on road performance
  • Includes all components necessary to get you on the trail
  • Complete Bolt-on System for easy install
  • Compatible with OEM wheels
  • Reuses stock shocks
  • No maintenance required for all included components
  • Lifetime Warranty on all hard parts
  • Fully upgradeable to higher level systems
  • Will Fit up to a 35 inch tire on the non-Rubicon, and 37 inch Tire on the Rubicon
  • Multi-rate, progressively wound coil springs increase lift height to 2 inches over stock. Front and rear coil springs are all new and have been designed specifically for the JL platform. Like OEM, the coil springs are unique lengths for each corner of the vehicle to compensate for weight distribution and prevent leaning. Longest in class free length prevents coil springs from coming unseated at full articulation and coil spring block height has been designed around optimal bump stop spacing for the lift height and tire size. Industry first closed and ground lower ends of the front coil springs ensure perfect fitment with the included front lower coil spring isolators. Our coil springs are guaranteed to resist bowing and have a lifetime guarantee against sagging/breakage.
  • Front and rear adjustable bump stop spacer kits are included to provide the necessary clearance required for larger tires. Bump stop spacing is adjustable from 2-4 inches in 1-inch increments without having to remove any hardware.
  • Stock rear sway bar links are relocated to the front and new rear sway bar links and drop brackets are added to the rear to allow full articulation of the rear suspension and maintain compatibility with stock wheels.
  • Front sway bar link relocation brackets paired with the stock rear sway bar links relocated to the front allows full articulation out of the front suspension.
  • Front and rear lower shock relocation brackets allow the stock shocks to be reused making this a true budget system. As funds allow, shocks can be upgraded at a later date to increase performance and wheel travel.
  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
  • 100% bolt on components assure an easy, trouble free installation with the use of basic hand tools.
Includes:
  • (1) 8863-20 Front Coil Springs (JL / JLU / JT), Pair
  • (1) 8864-20 Rear Coil Springs (JL / JLU), Pair
  • (1) 8057-10 Front/Rear Bump Stop Spacer Kit
  • (1) 8858-20 Rear Bumpstop Extension, 2.0 Tall
  • (1) 8886-02 Rear Sway Bar Drop Brackets
  • (1) 8855-02 Front Sway Bar Link Relocation Brackets
Notes:
  • In Order to use factory shocks you need to add Part Number 8819 to the Kit
  • If using longer travel aftermarket Shocks you have to do one of the following options:
    • Move OEM rear sway bar links to the front and add 8860-11 to the rear
    • Keep OEM rear sway bar links and add sway bar disconnects to the front
  • Synergy MFG coil springs lift the vehicle the advertised height over stock based on a fully loaded JL Rubicon. Other JL models will see more lift over stock. These coil springs do not lift taller than advertised. The stock rake based off the Rubicon model is kept to retain its load carrying capacity. If you prefer the vehicle to sit level when unloaded, we recommend adding a small coil spacer to the front (up to 3/4 inch without affecting up travel or causing coil bind, 8017-075).
  • For off road use, the front sway bar can be disconnected on Rubicon vehicles via the built in electronic disconnect system. On non-Rubicon vehicles, we recommend the addition of our front sway bar disconnect kit, 8859-01.
  • Synergy MFG?s Starter System is designed to be used with stock length shocks. If upgrading to longer shocks, the suspension will also need to be upgraded to at least Stage 1.
  • Synergy MFG is not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. We recommend using protective coatings for all items that will see extended outdoor and off road use. We have had great experience with the Fluid Film product and recommend it and similar products for any items susceptible to damage from corrosion. It is great for keeping double adjuster assemblies working like new and protecting shock bodies from the elements.
  • Recommended tire size is limited by fender clearance. With higher clearance fenders or trimmed fenders, larger tires may be fitted. Bump stop spacing should be matched to the collapsed length of the shocks. Mismatched bump stop spacing and shocks will limit the available travel from the system.
  • Recommended aftermarket shock fitment if not running Synergy Tuned Shocks.
    • Rear shock mounts in the highest position (brackets closest to the body of the Jeep).
    • Potential for fuel tank skid plate/rear drive shaft interference in certain JLUs. It is possible to shift the tank over to eliminate this or install an adjustable rear track bar.
    • May not be compatible with stock wheel backspacing.

Other Part Numbers:
Synergy MFG #syn8840-2000

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2018-2022
Jeep Wrangler

Who is Synergy?

Synergy Manufacturing is an aftermarket company that specializes in creating high-performance parts for various offroad vehicles. The company started back in 2005 and has been dubbed as the industry’s innovator of high-performance automotive components. They have continuously provided their customers with quality products. Hence, they have become a household name when it comes to offroading parts.

Designed by Experts

Synergy Manufacturing offers suspension parts and steering components designed to withstand the harsh condition of offroading. They have engineers with over decades of experience in suspension design and they use the latest CAD engineering software that allows them to create products. This makes their offerings made to fit perfectly on your vehicle.

Tested to Perform 

Their products are all made in the USA to ensure that they can consistently control the quality of their products. Their parts are not only tested inside the lab but are also subjected to a real-world environment. Their components are subjected to hardcore offroading activities in different offroading locations worldwide such as the Hammer Trails in Johnson Valley, The Rocks of Moabs, and different deserts such as the ones in California, Mexico, and Australia.

Purchase Synergy Manufacturing products at Vivid Racing

If offroading is your thing and you want parts that would be able to withstand its harsh environment, then Synergy Manufacturing is the brand for you. They are known for developing fully adjustable suspension systems and are designed to maximize both the vehicle’s on and offroad capabilities. Visit Vivid Racing and check out all their list of products that would fit your specific needs.

Synergy's Warranty Information
  • Warranty is non-transferable
  • All products must be on the original vehicle they were installed on by the original purchaser
  • Proof of purchase is required for all warranty issues
  • Synergy is not responsible for shipping or any additional labor charges incurred with the warranty of any product
  • Parts that are subject to wear and tear are not eligible for warranty. These products include but are not limited to: bushings, bump stops, bearings, tie rod ends, and dust boots
  • Products must be installed correctly, unaltered, and free from abuse
  • Synergy heavy duty front ball joint sets carry a 12 Month Unlimited-Warranty
  • Synergy hard parts have a Limited-Lifetime Warranty and are guaranteed to be free from defects in materials and workmanship
  • Product finishes are not guaranteed
To submit a warranty request, please email support@synergymfg.com. Please include your contact information, proof of purchase, and pictures or video demonstrating what you are attempting to warranty.

Check out these other great products