If you're diving into a project that involves your Dana Spicer 30, you’re going to want to check out these USA Standard ring and pinion sets. Trust me, these aren’t just any gears; they’re built to give you that peace of mind during your install. I've had my fair share of experiences with different gear sets, and these have proven to be reliable time and again.
First off, let’s talk specs. This set features a 7.20-inch ring gear diameter, which is pretty standard but solid. The 26 spline pinion is designed to fit snugly, and you’ll find it comes with ten ring gear bolts to keep everything locked down. The 3.54 gear ratio is a sweet spot for those looking to balance power and efficiency, making it a great choice whether you’re hitting the trails or cruising around town.
What I really appreciate about these gears is that they fit without a crush sleeve, which simplifies the installation process a lot. You won’t have to fuss with that extra step, and that’s a win in my book. Plus, USA Standard Gear backs their product with a one-year warranty against manufacturer defects, so you can feel a bit more secure about your investment.
Now, if you’re wondering where these bad boys fit, they cover a wide range of vehicles. From the classic Ford Bronco (1966-1971) to the Jeep CJ series (like the CJ5 from '71 to '83), and even some Volvos, you’ve got a lot of options. Whether you’re working on an International Scout II or a Jeep Grand Cherokee from the '90s, you’ll find a fit here.
In short, if you’re looking to upgrade or replace your ring and pinion, these USA Standard sets should be high on your list. They’ve got the specs you need and the reliability you want when you’re out there pushing your rig to the limit.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1980-1987 American Motors Eagle |
Eagle | 1980-1987 |
|
1986-1989 Ford Aerostar |
Aerostar | 1986-1989 |
|
1966-1971 Ford Bronco |
Bronco | 1966-1971 |
|
1971-1974 International Scout II |
Scout II | 1971-1974 |
|
1971-1983 Jeep CJ5 |
CJ5 | 1971-1983 |
|
1966-1975 Jeep CJ6 |
CJ6 | 1966-1975 |
|
1976-1986 Jeep CJ7 |
CJ7 | 1976-1986 |
|
1993-1996 Jeep Grand Cherokee |
Grand Cherokee | 1993-1996 |
|
1981-1986 Jeep Scrambler |
Scrambler | 1981-1986 |
|
1971-1973 Jeep Wagoneer |
Wagoneer | 1971-1973 |
|
1990-1993 Volvo 240 |
240 | 1990-1993 |
|
1978-1984 Volvo 242 |
242 | 1978-1984 |
|
1975-1989 Volvo 245 |
245 | 1975-1989 |
|
1977-1981 Volvo 265 |
265 | 1977-1981 |

USA Standard Gear is a company that supplies high-quality parts for the automotive industry. They are a one-stop-shop for all your drivetrain component needs and have one of the industry's most comprehensive parts list and inventory. Today, they are considered the leading supplier of these parts in the United States.
Drivetrain ExpertsThe company offers various parts ranging from axles, differential gears, lockers, limited slips, drivelines, and more. It is built by a team of craftsmen who has years of experience when it comes to assembling and modifying their own builds. This passion is what drives the company to create some of the best products in the market.
Quality In Every ProductAll their parts are manufactured in their facility equipped with the latest and most sophisticated tools available today. They also have two high-tech testing labs to ensure that every product comes out with the company's quality.
The USA Standard Gear engineering team is constantly on edge trying to find ways to develop and further improve their products. That is why they can produce innovative parts that adapt to the changing trend in the automotive world.
Purchase USA Standard Gear at Vivid RacingIf you are in the market for reliable and top-notched drivetrain components, then USA Standard Gear is the brand for you. With years of experience developing their products, they have provided their customers with parts they could trust, whether it's a replacement component or an upgrade.
To know more about USA Standard Gear, visit Vivid Racing and check out their list of offerings that fit your specific requirement.
Upon notification of a warranty claim, USA Standard shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product or replace it.
This warranty does not cover, and USA Standard shall not be liable for, incidental or consequential damages, including loss of time, road service charges, labor charges, inconvenience, loss of vehicle use, loss of revenues, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the USA Standard product). In addition, this warranty does not cover, and USA Standard shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling USA Standard Gear® products, except where such agreements are within the provisions of this Warranty statement. Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-USA Standard component.
This agreement offers you specific legal rights. You may also have other rights which vary from state to state.
USA STANDARD GEAR® WARRANTY BY PRODUCT| USA Standard Product | Length of Warranty (From date of sale) | NOTES |
|---|---|---|
| Spool | As long as original purchaser owns vehicle in which Spool is originally installed | It is normal for Spools to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for Spool to function properly without premature wear. |
| Rear Axle (1040/1050) | Five (5) Years | Covers parts for five years against manufacturing defects. |
| Front Axle (Series ZA W) | Five (5) Years | Five year warranty covering manufacturing defects and axle breakage. This warranty is not transferable to another party. “No Questions Asked†replacement for first warranty return, however, USA Standard Gear reserves the right to either replace axle or refund original purchase price after the first warranty claim. USA Standard Gear (through RANDYS Worldwide Automotive) makes final determination on warranty considerations. |
| Ring & Pinion Gear Set | One (1) Year | Warrantied against manufacturing defects for one (1) year. |
| Positraction Differential | One (1) Year | Exclusions apply, does not cover premature clutch wear or abuse. It is normal for Positraction differentials to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for differential to function properly without premature wear. Limited slip additive or appropriate friction modifier must be used with oil to reduce Positraction chatter. |
| Spartan Locker | One (1) Year | Warrantied against manufacturers defects for one (1) year. |
| Install Kits | One (1) Year | Includes ZBK, ZPK, and ZK. Covers parts for one year against manufacturing defects. |
| Spider Gear Kits (ZIK) | One (1) Year | One year against manufacturing defects. Exclusions apply, does not cover clutch wear in limited slip differentials. |
| Replacement Driveshafts (ZDS) | One (1) Year | Warrantied against manufacturing defects for one (1) year. |