If you’re driving a 1999-2002 Ford F250 or F350, you know how crucial the driveshaft is to keeping your beast on the road. The Rear OE Driveshaft Assembly - ZDS9114 from USA Standard Gear is a solid choice when your old one starts to show its age. I’ve seen my fair share of worn-out drivetrains, and let me tell you, this driveshaft is a game changer.
What’s great about this assembly is that it’s made right here in the USA. You can feel good about that. Each shaft is crafted with precision, adhering to strict tolerances, which means it’s balanced just right, minimizing any annoying vibrations that can come from a poorly made part. The last thing you want is to feel like you’re driving a bucking bronco, right?
This driveshaft measures in at a handy 57 1/4 inches long, measured from the center of the U-joint caps. It’s designed specifically for the models with a 6.8L engine, an E4OD automatic transmission, and a 141.8-inch wheelbase. So, if your truck fits that bill, you’re in luck!
Installation is a breeze because it comes as a complete package—no hunting for extra parts or wondering if you’re missing anything. Just unbox it, bolt it on, and you’re ready to roll. Plus, it’s made from ASTM A513 DOM tubing, which means you’re getting a tough, durable product that can handle the rigors of the road.
And if you’re worried about longevity, USA Standard backs this driveshaft with a limited lifetime warranty. That’s their way of saying they trust their product, and you can too. Whether you’re hauling heavy loads or just cruising around town, this driveshaft is ready to keep your truck in action.
Technical Notes:
So, if your Ford F-250 or F-350 is starting to feel a little off, consider the ZDS9114 Rear OE Driveshaft Assembly. It’s reliable, made in the USA, and ready to get you back on the road without breaking the bank.
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1999-2002 Ford F-250 |
F-250 | 1999-2002 |
|
1999-2002 Ford F-350 |
F-350 | 1999-2002 |

USA Standard Gear is a company that supplies high-quality parts for the automotive industry. They are a one-stop-shop for all your drivetrain component needs and have one of the industry's most comprehensive parts list and inventory. Today, they are considered the leading supplier of these parts in the United States.
Drivetrain ExpertsThe company offers various parts ranging from axles, differential gears, lockers, limited slips, drivelines, and more. It is built by a team of craftsmen who has years of experience when it comes to assembling and modifying their own builds. This passion is what drives the company to create some of the best products in the market.
Quality In Every ProductAll their parts are manufactured in their facility equipped with the latest and most sophisticated tools available today. They also have two high-tech testing labs to ensure that every product comes out with the company's quality.
The USA Standard Gear engineering team is constantly on edge trying to find ways to develop and further improve their products. That is why they can produce innovative parts that adapt to the changing trend in the automotive world.
Purchase USA Standard Gear at Vivid RacingIf you are in the market for reliable and top-notched drivetrain components, then USA Standard Gear is the brand for you. With years of experience developing their products, they have provided their customers with parts they could trust, whether it's a replacement component or an upgrade.
To know more about USA Standard Gear, visit Vivid Racing and check out their list of offerings that fit your specific requirement.
Upon notification of a warranty claim, USA Standard shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product or replace it.
This warranty does not cover, and USA Standard shall not be liable for, incidental or consequential damages, including loss of time, road service charges, labor charges, inconvenience, loss of vehicle use, loss of revenues, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the USA Standard product). In addition, this warranty does not cover, and USA Standard shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling USA Standard Gear® products, except where such agreements are within the provisions of this Warranty statement. Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-USA Standard component.
This agreement offers you specific legal rights. You may also have other rights which vary from state to state.
USA STANDARD GEAR® WARRANTY BY PRODUCT| USA Standard Product | Length of Warranty (From date of sale) | NOTES |
|---|---|---|
| Spool | As long as original purchaser owns vehicle in which Spool is originally installed | It is normal for Spools to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for Spool to function properly without premature wear. |
| Rear Axle (1040/1050) | Five (5) Years | Covers parts for five years against manufacturing defects. |
| Front Axle (Series ZA W) | Five (5) Years | Five year warranty covering manufacturing defects and axle breakage. This warranty is not transferable to another party. “No Questions Asked†replacement for first warranty return, however, USA Standard Gear reserves the right to either replace axle or refund original purchase price after the first warranty claim. USA Standard Gear (through RANDYS Worldwide Automotive) makes final determination on warranty considerations. |
| Ring & Pinion Gear Set | One (1) Year | Warrantied against manufacturing defects for one (1) year. |
| Positraction Differential | One (1) Year | Exclusions apply, does not cover premature clutch wear or abuse. It is normal for Positraction differentials to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for differential to function properly without premature wear. Limited slip additive or appropriate friction modifier must be used with oil to reduce Positraction chatter. |
| Spartan Locker | One (1) Year | Warrantied against manufacturers defects for one (1) year. |
| Install Kits | One (1) Year | Includes ZBK, ZPK, and ZK. Covers parts for one year against manufacturing defects. |
| Spider Gear Kits (ZIK) | One (1) Year | One year against manufacturing defects. Exclusions apply, does not cover clutch wear in limited slip differentials. |
| Replacement Driveshafts (ZDS) | One (1) Year | Warrantied against manufacturing defects for one (1) year. |