If you're looking for a reliable and high-quality replacement for your Ford F-150, the USA Standard Gear ZDS101670 driveshaft is just what you need. Designed specifically for the 2009-2011 Ford F-150, this driveshaft is built from the ground up using high-grade steel, ensuring durability and performance. Forget about remanufactured units; this driveshaft offers the peace of mind that comes with a brand-new part, ready to tackle whatever the road throws at you.
This driveshaft features new slip yokes and maintenance-free u-joints, providing you with decades of carefree use. USA Standard Gear has even gone the extra mile by redesigning and strengthening the driveshaft to exceed factory specifications, addressing common OE failure points that many F-150 owners encounter. Plus, it's precision balanced to eliminate vibrations, ensuring a smooth ride every time you hit the road.
The ZDS101670 is a two-piece driveshaft designed for the rear position of your Ford F-150, with an overall collapsed length of 89.5 inches. It’s compatible with models equipped with a 9.75-inch rear end and a 12-bolt cover. This part directly replaces the OE number AL3Z-4R602-KB, making installation straightforward and hassle-free.
F-150 owners have praised the ZDS101670 for its flawless fit and performance. One customer noted, "I installed the ZDS101670 on my 2010 F-150, and it was a perfect replacement. The ride is smoother, and I love that I don’t have to worry about vibrations anymore." Another added, "This driveshaft was super easy to install, and it got my truck back on the road in no time!"
With the USA Standard Gear ZDS101670 driveshaft, you’re investing in quality and reliability for your Ford F-150. It arrives fully assembled and ready to install, so you can get back to enjoying your ride without delay. Don't settle for less; upgrade your driveshaft today!
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2009-2011 Ford F-150 |
F-150 | 2009-2011 |

USA Standard Gear is a company that supplies high-quality parts for the automotive industry. They are a one-stop-shop for all your drivetrain component needs and have one of the industry's most comprehensive parts list and inventory. Today, they are considered the leading supplier of these parts in the United States.
Drivetrain ExpertsThe company offers various parts ranging from axles, differential gears, lockers, limited slips, drivelines, and more. It is built by a team of craftsmen who has years of experience when it comes to assembling and modifying their own builds. This passion is what drives the company to create some of the best products in the market.
Quality In Every ProductAll their parts are manufactured in their facility equipped with the latest and most sophisticated tools available today. They also have two high-tech testing labs to ensure that every product comes out with the company's quality.
The USA Standard Gear engineering team is constantly on edge trying to find ways to develop and further improve their products. That is why they can produce innovative parts that adapt to the changing trend in the automotive world.
Purchase USA Standard Gear at Vivid RacingIf you are in the market for reliable and top-notched drivetrain components, then USA Standard Gear is the brand for you. With years of experience developing their products, they have provided their customers with parts they could trust, whether it's a replacement component or an upgrade.
To know more about USA Standard Gear, visit Vivid Racing and check out their list of offerings that fit your specific requirement.
Upon notification of a warranty claim, USA Standard shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product or replace it.
This warranty does not cover, and USA Standard shall not be liable for, incidental or consequential damages, including loss of time, road service charges, labor charges, inconvenience, loss of vehicle use, loss of revenues, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the USA Standard product). In addition, this warranty does not cover, and USA Standard shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling USA Standard Gear® products, except where such agreements are within the provisions of this Warranty statement. Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-USA Standard component.
This agreement offers you specific legal rights. You may also have other rights which vary from state to state.
USA STANDARD GEAR® WARRANTY BY PRODUCT| USA Standard Product | Length of Warranty (From date of sale) | NOTES |
|---|---|---|
| Spool | As long as original purchaser owns vehicle in which Spool is originally installed | It is normal for Spools to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for Spool to function properly without premature wear. |
| Rear Axle (1040/1050) | Five (5) Years | Covers parts for five years against manufacturing defects. |
| Front Axle (Series ZA W) | Five (5) Years | Five year warranty covering manufacturing defects and axle breakage. This warranty is not transferable to another party. “No Questions Asked†replacement for first warranty return, however, USA Standard Gear reserves the right to either replace axle or refund original purchase price after the first warranty claim. USA Standard Gear (through RANDYS Worldwide Automotive) makes final determination on warranty considerations. |
| Ring & Pinion Gear Set | One (1) Year | Warrantied against manufacturing defects for one (1) year. |
| Positraction Differential | One (1) Year | Exclusions apply, does not cover premature clutch wear or abuse. It is normal for Positraction differentials to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for differential to function properly without premature wear. Limited slip additive or appropriate friction modifier must be used with oil to reduce Positraction chatter. |
| Spartan Locker | One (1) Year | Warrantied against manufacturers defects for one (1) year. |
| Install Kits | One (1) Year | Includes ZBK, ZPK, and ZK. Covers parts for one year against manufacturing defects. |
| Spider Gear Kits (ZIK) | One (1) Year | One year against manufacturing defects. Exclusions apply, does not cover clutch wear in limited slip differentials. |
| Replacement Driveshafts (ZDS) | One (1) Year | Warrantied against manufacturing defects for one (1) year. |